Forest garden RETREAT SHED FRA46 User manual

RETREAT
SHED
4"x6" FRA46
Issue: 0119
Forest Garden Ltd | Unit 288 | Oak Drive | Hartlebury Trading Estate | Hartlebury | Worcestershire | Dy10 4JB

NO
Screws
PANEL 1
Size: 1755x1165mm
PLACE
IN
LOCATION
MUS T PRE DRILL
Step 1 Step 2
INSTRUCTIONS
INFORMATION
This building is pressure treated to ensure longevity of all timber components and to protect against rot. This may leave a colour difference on some parts that will even out as the moisture
content stabilises. This will not need additional treatment.
- This product must be built on a solid level base.
- The roof of this building is not a load bearing structure.
- Please keep all plastic bags and small parts away from children
- Timber is a natural material. It will shrink and swell as a result of varying moisture content.
- Due to the nature of the material the doors may need some trimming for a neater fit.
Technical Help line: 0333 7777 089 8.30 am and 5.00 pm Monday to Friday.
Please check all parts prior to assembly
Assembly of damaged parts may be deemed to be acceptance and this may affect the remedies you are entitled to.
If the product is not constructed in accordance with the instructions, or is altered in any way (e.g. painted), the manufacturer cannot be held liable for any resulting damage
This article contains biocidal products to give protection against wood destroying insects & wood rotting fungi. Contents may vary.
May contain : Basic copper carbonate (Copper (II) carbonate – Copper (II) hydroxide (1:1), Cupric oxide, Copper hydroxide carbonate, oxyethyl, ammoniumpropionate, Copper HDO,
Propiconazole, Tebuconazole, Boric acid, Benzalkonium chloride.
Wear gloves when handling freshly treated wood. Avoid breathing dust when cutting treated or untreated wood. Dispose of off-cuts responsibly – do not burn.
Important : Assembly
of this shed requires a
minimum of two adults.
BATTEN 1 (45451905PMPPT)
Size: 45x45x1905mm ANGLED
Qty: 2
BATTEN 2 (70121905PPT)
Size: 70x12x1905mm
Qty: 2
BATTEN 3 (70251680P)
Size: 70x25x1680mm
Qty: 4
BATTEN 4 (121121100PAII45)
Size: 121x12x1100mm ANGLED
Qty: 4
PANEL 1 (TP64FL)
Size: 1755x1165mm
Qty: 2
PANEL 2 (POA6PS)
Size: 1665x1710mm
Qty: 1
PANEL 3 (POA6WS)
Size: 1665x1710mm
Qty: 1
PANEL 4 (POA4DE)
Size: 2248x1165mm
Qty: 1
PANEL 5 (POA4PE)
Size: 2248x1165mm
Qty: 1
PANEL 6 (FPA46RFLH)
Size: 1945x970mm
Qty: 1
PANEL 7 (FPA46RFRH)
Size: 1905x970mm
Qty: 1
DOOR (POAD)
Size: 650x1739mm
Qty: 1
WINDOW (POAW)
Size: 244x658mm
Qty: 4
PANEL 2
Size: 1665x1710mm
PANEL 5
Size: 2248x1165mm
3x
50mm
Screws Connect
Walls
2x
50mm
Screws
Into
Floor
2x
50mm
Screws
Into
Floor
BLOCK (152120100P)
Size: 152x100x12mm
Qty: 1
FINIAL (FIN34914418)
Size: 349x144x18mm
Qty: 2
Fixing Pack: FRA58FP
Flush Hinge
Qty 4
Door Hinge
Qty 3
Handle Set
Qty 1
Rimlock
Qty 1
Casement Stay
Qty 2
Escutcheon
Qty 1
50mm Screw Qty 40
Shingle Pins Qty 400
20mm Screw Qty 46
40mm Screw Qty 16 30mm Screw Qty 54
Catch Plate
Qty 1
Striking Plate
Qty 1
Pozi Drive Screwdriver
Tools needed (Not supplied)
Tape Measure Hammer Drill
60mm Screw Qty 4
Chisel

PANEL 3
Size: 1665x1710mm
Step 3
Step 4
Step 6 Step 7
SCREW MUST GO TROUGH FLOOR PANEL
AND INTO THE BATTENS OF FLOOR PANEL
MUS T PRE DRILL
INSIDE VIEW
DETAIL A
OVER-
LAPPING
3x
50mm
Screws Connect
Walls
2x
50mm
Screws
Into
Floor
Connect
Walls
3x
50mm
Screws
Connect
Walls
3x
50mm
Screws
2x
50mm
Screws
Into
Floor
A
PANEL 4
Size: 2248x1165mm
BATTEN 3
Size: 70x25x1680mm
BATTEN 3
Size: 70x25x1680mm
BATTEN 3
Size: 70x25x1680mm
BATTEN 3
Size: 70x25x1680mm
Step 5
SLIDE
UP
SLIDE
UP
DROPS
INTO PLACE
PANEL 7
Size: 1945x970mm
PANEL 6
Size: 1945x970mm
3x
50mm
Screws
INTO
WALLS
3x
50mm
Screws
3x
50mm
Screws
INTO
WALLS
ROOF
CENTRAL
4x
50mm
Screws
INTO
ROOF
INTO
WALLS
BATTEN 1
Size: 45x45x2548mm
Check
Side
BATTEN 1
Size: 45x45x2548mm
3x
30mm
Screws
3x
30mm
Screws
3x
50mm
Screws
INTO
WALLS
BATTEN 1
Size: 45x45x1905mm
4x
50mm
Screws
INTO
ROOF
4x
50mm
Screws
INTO
ROOF
4x
50mm
Screws
INTO
ROOF
BATTEN 1
Size: 45x45x1905mm
MUS T PRE DRILL
MUS T PRE DRILL
MUS T PRE DRILL
3x
30mm
Screws
3x
30mm
Screws

Step 7
Step 8 Step 9
Step 10
CEDAR SHINGLES ROOF
Nails or staples should be
19mm from the edge of
the shingles and 38mm
above the butts of the
course.
Alternative courses should
not align
Step 11
Smaller
Part
3x
20mm
Screws
Smaller
Part
3x
20mm
Screws
HINGE
HINGE
WINDOW (POAW)
Size: 244x658mm
3x
20mm
Screws
3x
20mm
Screws
REPEAT
BATTEN 4
Size: 121x12x1100mm
BATTEN 4
Size: 121x12x1100mm
4x
30mm
Screws
BATTEN 4
Size: 121x12x1100mm
BATTEN 4
Size: 121x12x1100mm
4x
30mm
Screws
BATTEN 2
Size: 70x12x1905mm
BATTEN 2
Size: 70x12x1905mm
2x
20mm
Screws
2x
20mm
Screws
2x
20mm
Screws
CASEMENT
STAY
REPEAT
3x
30mm
Screws
3x
30mm
Screws
3x
30mm
Screws
3x
30mm
Screws
MUS T PRE DRILL
MUS T PRE DRILL
MUS T PRE DRILL
MUS T PRE DRILL
May Also be fitted to the
top of the window

Step 11
Step 12
3x
20mm
Screws
3x
20mm
Screws
3x
20mm
Screws
Smaller
Part
3x
30mm
Screws
Smaller
Part
3x
30mm
Screws
Smaller
Part
3x
30mm
Screws
DRILL
KEY
HOLE
2x
20mm
Screws
Key
Plate
4x
20mm
Screws
BLOCK
Size: 152x100x12mm
4x
40mm
Screws
4x
40mm
Screws
Rim-
Lock
Drill
Recess
35mm Wide
15mm Deep
4x
20mm
Screws
Door
Knob
SHED
Door
3x
30mm
Screws
Flush
Hinge
Door
Flush
Hinge
3x
30mm
Screws
SHED
Step 14
FINIAL
Size: 349x155x18mm
FINIAL
Size: 349x155x18mm
2x
30mm
Screws
2x
30mm
Screws
MUS T PRE DRILL
MUS T PRE DRILL
MUS T PRE DRILL
Step 13
2x
20mm
Screws
CATCH
PLATE
2x
20mm
Screws
STRIKING
PLATE
MUS T PRE DRILL
CHISEL
RECESS
CATCH
PLATE
RIMLOCK
NEEDS TO
CATCH ON
PLATE