FRANCO BELGE Belfort 174 05 05 User manual

Technical manual
to be saved
by the user
for future reference
Document n° 979-3 EN ~ 28/02/2000
Les Fonderies Franco-Belges
59660 MERVILLE
Phone : [phone]
Fax : [phone]
RC Hazebrouck 445750565B
Subject to modifications
Belfort
Oil fired stove
Model : 174 05 05
(EN 1)
Description of the appliance
Installation instructions
Operating instructions
Spare parts
English
Norsk

Description of the unit ........................................3
Package ....................3
Optional equipment ..............3
Specifications .................3
Description ..................3
Operatingprinciple ..............4
Installationinstructions .......................................4
Positionoftheunit ..............4
Chimney....................4
Mounting the levelling feet ..........5
Topflueoutlet.................5
Rearflueoutlet ................5
Chimney connector ..............5
Externaltank .................6
Levelling ....................6
Pre-utilisation check .............6
Oilflowadjustment..............6
Chimney draught ...............7
Doorclosingpressure ............7
MaintenanceoftheChimney.........7
Operatinginstructions ........................................8
Fuel ......................8
Lighting procedure ..............8
Operating procedure .............8
Shuttingdown.................8
Maintenanceofthestove...........8
Recommendation ...............9
Trouble shooting .............. 10
Spareparts..............................................11
FRANCO BELGE congratulates you on your choice.
FRANCO BELGE, which has been granted the ISO 9001 certification, guarantees the quality of its
appliances and is committed to meet its customers’ needs.
FRANCO BELGE, which can boast a 75-year experience in the industry of heating devices, uses
state-of-the-art technologies to design and manufacture its whole range of products.
This document contains instructions on how to install your appliance and and make full use of its
functions, both for your comfort and safety.
CONTENTS Page Page
Document n° 979-3 EN ~ 28/02/2000
174 05 05 BELFORT Oil fired stove
2Technical manual

1.Description of the unit
1.1. Package
¤ 1 package. The stove is supplied completely
assembled except the four levelling feet that are placed
on the burner.
1.2. Optional equipment
¤ Ground vat
¤ Glow-plug ignitor
1.3. Specifications
Model ...................... 1740505
Nominal heat output . . . . . . . . . . . . kW 5
. . . . . . . . . . . . . . . . . . . . . . BTU/hr 18.000
Oil consumption at :
-maximumspeed ............litre/h 0,58
.......................gal/hr 0,16
- minimum speed . . . . . . . . . . . . . litre/h 0,17
.......................gal/hr 0,045
Chimney draught required at :
-maximumspeed ............. Pa 15
-minimumspeed.............. Pa 8
Weight .................... kg 67,6
1.4. Description
Flued oil stove with vaporizing burner
(Norm EN 1).
Figure 1 - Minimum clearances to combustible walls
392
340 182
Ø 120/127
452
530
558
420
Figure 2 - Dimensions in mm
200 mm
200
mm
200 mm
200
mm
Document n° 979-3 EN ~ 28/02/2000
Oil fired stove BELFORT 174 05 05
Technical manual 3

1.5. Operating principle
Furnace oil is fed to the burner floor (fig. 3) where is it
ignited by means of a firestarter (or the Glow-plug
ignitor # 6). The heat produced by this flame brings the
burner temperature to the required level to vaporize the
fuel. Oil will only burn as a vapour not a liquid.
Room combustion air enters the burner through the air
inlet holes.
In the center of the burner is the catalyser (# 4, fig. 3)
which aids in vaporizing the fuel. When the stove is
operation,the catalyser glowsred. The stove should not
be used with out both the catalyser (# 4, fig. 3),
catalyser top (# 3) and ring (# 2).
A de-scaling lever (# 7, fig.3) can be pushed and pulled
in and out as well as turning slightly at the same time to
keep the inlet pipe clear of carbon buildup.
The stove float regulator contains a filter to trap
impurities.
A safety lever controls fuel flow. Oil can only enter the
float chamber when the safety lever is depressed.
Oil temperature variations will affect the oil flow into the
float chamber. A float in the chamber raises the fuel
level available to the burner.
The float regulator is also controlled by a control knob
which turns from “0" (off) to ”6" (high setting).
A draught regulator (# 1, fig. 12, p. 6) ensures a
constant air intake to the burner regardless of external
factors.
2.Installation instructions
SAFETY NOTICE : Read carefully all instructions before
starting the installation. If the stove is not properly instal-
led, a house fire may result. For your safety, follow the
installation directions. Contact local building or fire offi-
cials about restrictions and installation inspection in your
area.
2.1. Position of the unit
- The position of the appliance must be chosen very
carefully in order to obtain the best possible results for
heat distribution.
- Position the unit to comply with the minimum
clearances to combustible material. Minimum
clearances are shown from the vertical portion of the
chimney connector. Check that no overhead cross
members in the ceiling will be cut. Reposition unit if
necessary, being careful not to move closer than the
minimum clearances.
- Outside air : For the oil stove to function properly, an
adequate supply of combustion air is required.
2.2. Chimney
- Ensure that the flue has sufficient draught (refer to
technical details).
- Minimum flue diameter, 10 cm (4" I.D).
- The chimney must be at least 4.5 m (15 ft high).
- The flue must not be shared with any other appliance.
- Downdraughts caused by obstacles close to the
chimney top may sometimes be prevented by fitting an
anti-downdraught cap to the top of the chimney.
- The chimney must have a constant cross section. Too
large a flue could affect the chimney draught.
1
2
3
4
5
6
7
Figure 3 - Burner
1- Air holes
2- Upper ring
3- Catalyser top
4- Catalyser
5- Burner
6- Glow-plug ignitor
(optional)
7- De-scaling lever
1
2
4
5
3
6
7
8
9
10
Figure 4 - Description
1- Blanking plate
2-Maindoor
3- Flue collar
4- Baffle
5-Tray
6- Sliding door
7- Supplementary baffle
8- Draught control
9- Ceramic coal
10 - Coal support
Document n° 979-3 EN ~ 28/02/2000
174 05 05 BELFORT Oil fired stove
4Technical manual

- The chimney must be soundly constructed, in order to
prevent cold air infiltration.
- The flue must be well insulated, water and air tight. A
chimney with a cold internal surface can prevent a good
chimney draught and condensation will occur.
- The flue must be swept at least once a year.
2.3. Mounting the levelling feet
Fit the 4 screws and the 4 caps supplied (on the burner)
into each leg of the stove (fig. 8).
2.4. Top flue outlet
Figure 5
- Open the main door, remove the ceramic coal grate
with theirs coal (# 9 and 10, fig. 4, p. 4) and remove the
internalbaffle(#4and7,fig.4,p.4).
- Fix the sealing rope in the groove on the top and fitthe
flue spigot using the two bolts and washers supplied,
ensuring there is a good seal.
- Replace the internal baffles.
The cut-out of the rear heat shield must not be remove
in the case.
2.5. Rear flue outlet
Figure 7
- Open the main door, remove the ceramic coal grate
with theirs coal (# 9 and 10, fig. 4, p. 4) and remove the
internalbaffle(#4and7,fig.4,p.4).
- Remove the rear heat shield and the cut-out on it
(fig. 6).
- Remove the blanking plate 5and the clamp 4from the
back and refit them on the top with the 2 screws and
washers supplied 7, ensuring there is a good seal 2.
- Set the ceramic rope in the groove and fix the flue
collar at rear with 2 bolts and washers supplied.
- Reinstall the internal baffles.
- Replace the rear heat shield.
2.6. Chimney connector
- The appliance must be as close as possible to the
chimney. Avoid horizontal flue connection pipes which
can dangerously restrain functioning of the appliance.
- The connector pipe must be either 24 ga. black
painted or blued steel or 316 grade 20 ga. stainless
steel or 1 mm vitreous enamelled steel, with a maximum
diameter of 127 mm (5" O.D.). Single wall pipe may be
utilized being careful to maintain clearances to any
combustible surface.
Once the stove has been properly installed the chimney
draught must be checked with a draught meter.
If the chimney draught is excessive or irregular, a
3
1
2
Figure 5 - Top flue outlet
1- Flue collar
2- Sealing rope
3- Screws, washers and
bolts
Figure 6 - Back panel
7
5
21
3
4
6
Figure 7 - Rear flue outlet
1- Flue collar.
2- Sealing rope.
3- Back panel.
4-Clamp.
5- Blanking plate.
6- Screws, washers and
bolts.
7- Screws and washers.
Figure 8 - Levelling
Document n° 979-3 EN ~ 28/02/2000
Oil fired stove BELFORT 174 05 05
Technical manual 5

draught stabilizer (barometric damper) must be
installed to the connector pipe.
2.7. External tank
A barometric fuel tank should not be positioned where
it will be in the direct rays of the sun or adjacent to a
source of intense heat.
If the tank is more than 8 ft (2,5 m) higher than the stove a
pressure reducer must be installed on the oil line (max.
working pressure : 300 mbar).
If the tank is lower than the stove a liftpump will have to be
utilized.
A clearance of 6 “ (15 cm) must be maintained between
the external/remote tank and the stove.
2.8. Levelling
It is essential to ensure that the appliance sits level on
the floor. Adjust the levelling feet (fig. 8).
Use a spirit level across the burner pot to check the
level (fig. 10).
2.9. Pre-utilisation check
Check the condition of the filler seals, that the door
closes correctly, that the window is not damaged, that
the smoke passages are not obstructed by packaging
or removable parts. All removable parts, fuel retainer,
baffle, must be correctly installed.
2.10. Oil flow adjustment
The float regulator has been adjusted at the factory and
should not need further adjustment. If the burner does
not work correctly, check possible causes before
readjusting the settings :
- Chimney draught
- Fresh air inlet
- Oil supply.
Low setting (Refer to # 2, fig. 12) :
- set the regulating knob on “1" and let the burner run
for a few minutes. The flame must completely cover the
bottom of the burner and the catalyser body must be
glowing red hot.
- if the flame is too small, the stove will soot up quickly ;
increase the flame by turning the setting screw (# 2)
A
Figure 9 - Fitting the tray
Figure 10 - Burner level check
1
5
3
6
2
7
1
3
46
2
7
Figure 11 - Gravity or pumped oil supply
1-2,5mmaxi
2- At least 0,25 m
3- Oil Tank
4- Filter
5- Suction pump with
reserve and filter
6- Pipe Ø 6x8 mm
7- At least 0,15 m
1
23
Figure 12 - Adjustment devices
1- Adjustment of the draught regulator
2- Adjustment screw for low setting
3- Adjustment screw for high setting
Document n° 979-3 EN ~ 28/02/2000
174 05 05 BELFORT Oil fired stove
6Technical manual

clockwise.
- if the flame is too high, reduce the flame by turning the
setting screw (# 2) counter clockwise.
High setting (Refer to # 3, fig. 12) :
- set the regulating knob on “6" and let the burner run
for a few minutes. The flamemust be shaped like acone
and reach the upper part of the door.
- if the flame is too low, increase the flame by turning the
setting screw counter clock wise.
- if the flame is too high, reduce the flame by turning the
setting screw clockwise.
Please note - Very important : The adjustments of the
float regulator are very sensitive. The high and the low
setting screws must never be turned more than a 1/4 of
a turn at a time in any direction from their initial setting.
When making any adjustments, allow 3 to 5 minutes
between adjustments to allow burner to stabilize to
previous adjustment before proceeding, if necessary.
2.11. Chimney draught
Once the stove has been properly installed, the
chimney draught must be checked.
The adjustment of the draught will be made with the
barometric damper located at the back of the stove
(# 1, fig. 12).
The reading of the draught must be done once the unit
is hot (minimum 30 minutes of use).
Refer to the specifications p. 3 for minimum draught
requirement on low setting and on high setting.
2.12. Door closing pressure
The closing latch rotates around a pressure screw
positioned cam (fig. 13).
- Loosen pressure screw 1.
- Turn cam to desired position 2.
- Tighten pressure screw 1.
2.13. Maintenance of the Chimney
Chimney and chimney connector should be inspected
at least once every three months during the heating
season to determine if a soot build up has occurred. If
soot has accumulated, it should be removed to reduce
the risk of a chimney fire.
12
Figure 13 - Door closing pressure
1- Pressure screw
2-Cam
Document n° 979-3 EN ~ 28/02/2000
Oil fired stove BELFORT 174 05 05
Technical manual 7

3.Operating instructions
3.1. Fuel
Warning : Your stove is fitted with a specific float
regulator for a specific oil.
¤ Kerosene 28 sec. (1,8 cst at 25°C)
The fuel oil must be free from any dirt and water which
could disturb the stove in operation.
3.2. Lighting procedure
- Be sure the control knob is to “0" (# 1, fig. 14).
- Turn on oil supply,
- Push down gently on the safety lever (# 2, fig. 14).
This will allow the oil to flow into the float regulator.
- Open the front door, and remove the catalyser from
burner (# 2, 3 and 4, fig. 3, p. 4). Make sure the inside
of the pot is clean thoroughly, and there is no oil
accumulation.
- Place 2 tablespoons of methylated spirit or gelled
alcohol in the bottom of the pot. Light the starter gel or
methylated spirit with a fireplace match or long butane
lighter. Place the catalyser back into the burner, being
sure it is centered in the burner. Shut the main door.
- Allow the catalyser to heatapproximately 30 to 45 sec.
Turn dail to “1" position.
- Allow 10 to 15 minutes for oil fire and draught to
stabilize. The catalyser should glow red before
adjusting the control knob to a higher setting.
3.3. Operating procedure
Allow 10 to 15 minutes after lighting to adjust the
control knob to a higher setting, usually between a “2"
and ”4" setting.
When increasing the heatoutput, move the control knob
only 1 number at a time, allowing 5 minutes between
moves for the flame to re-adjust to new setting.
If the burner stops during operating, immediately turn
off the control knob (position “0") and wait until the
burner is completely cool before repeating the lighting
procedure.
3.4. Shutting down
- Set dial to the “0" position (# 1, fig. 14).
- Raise the safety lever of the float regulator
(# 2, fig. 14).
- Allow the flame to burn out completely before opening
the door.
3.5. Maintenance of the stove
Every week : operate the de scaling lever (# 4, fig. 14).
- Pull the rod, then push the rod in rotating 360 degrees
two or three times (CAUTION : The rod is HOT).
Every3or4months: Clean the burner completely.
- Remove all the parts of the catalyser
(# 2, 3 and 4, fig. 3, p. 4)
- Using a soft bristle brush (a small clean paint brush),
carefully brush off the catalyser. Loosen any carbon
soot fromthe bottom ofthe burnerwith a puttyknife, and
vacuum clean. Ensure that the small air holes in burner
are free of carbon.
At least once a year / End of heating season : Clean
or replace all the oil filters in the oil supply line.
To clean the filter of the float regulator :
-settheregulationknobinclosedposition“0"
(# 1, fig. 14),
- turn off the tankvalve or the valve of the oil supply line,
- raise the safety lever of the float regulator
(# 2, fig. 14),
- place a small container (or a small rag) under the float
regulator filter opening in order to collect the oil
contained in the float regulator,
- remove the filter cover plate located under the float
1
3
2
Figure 14 - Operating devices
1- Regulation knob.
2- Safety lever.
3- Access to float regulator filter.
4- De-scaling lever.
5- Door handle.
4
5
Document n° 979-3 EN ~ 28/02/2000
174 05 05 BELFORT Oil fired stove
8Technical manual

regulator (# 3, fig. 14) with a screwdriver,
- remove the tubular filter from the float regulator. Clean
it with oil using a soft brush, never a wire-brush,
- replace the filter in the float regulator, install the cover
plate and secure with the screw.
Clean all the enamelled panels of the stove with a dry
or slightly damp soft cloth.
Use a soft clean cloth to wipe the front glass when the
unit is running at a low burning rate. When the main
door is opened for cleaning, the flame will be disturb,
and turn to a yellow flame. Clean quickly, but gently.
Close the door, the flame will return to a normal burning
position.
N.B. : The appearance of cracks when burning the
enamelled units is quite usual and tends to disappear
when the appliance is cooling down. It should not be
considered as a defect but rather as a patina of the
enamel which does not affect its quality nor its service
ability.
3.6. Recommendation
The adjustment of the stove has been made at the
factory and checked by your installer. Any anomaly of
operation should be reported to him at once.
This room heater is a high heat producing appliance
and may cause severe burns if touched on the glass
front door, or on top directly over the burner - keep
children away - Do not use for drying wet clothing.
CAUTION : Never light the burner if there is oil in the
burner pot. Clean out oil before lighting.
Racing : An audible fluttering sound is an indication
that there is too much oil in the pot burner and/or a lack
adequate draught.
- turn off oil supply and set the control knob in closed
position “0" (# 1, fig. 14, p. 8).
- until fire has decreased to proper burn rate.
Do not overfire : If the stove or chimney connector
starts to glow, you are overfiring.
Document n° 979-3 EN ~ 28/02/2000
Oil fired stove BELFORT 174 05 05
Technical manual 9

3.7. Trouble shooting
SYMPTOM PROBLEM −TEST SOLUTION
Flames extinguish during
lighting. ¤ Very cold chimney. No draught established. −- Leave door ajar until fire has caught. - Check air supply in the room.
Fire extinguishes once
firestarter has burnt off. ¤Fueltankisempty. −- Fill tank.
¤ Fuel valve is closed. −-Openvalve.
¤ Main regulator float not engaging. −- De-press the safety lever.
¤ Control knob is set on “0" −- Adjust control knob to ”1".
Fire extinguishes during use. ¤Fueltankisempty. −- Fill tank.
¤ Insufficient draught. −- Call your installer.
Flame is excessively large,
smoky and sooty. ¤ Fuel adjustment made too quickly. −- Return control knob to “1";wait for normal combustion. (catalysershouldglowred)Wait5to15minutesbetween
each adjustment.
Stove burns noisily,
extinguishes and relights itself. ¤ Burner contains excess fuel.
þ −- Adjust to lower setting. If problem persists call your
installer.
¤ Insufficient fuel. −- Check that the de-scaler, the float regulator filter and
burner pot are cleaned.
Fire smokes.Soot build up
noticed.Flame imbalance ¤ Insufficient air supply. −-Increasefresh airsupply (opendoor,window;addmake up air supply).
¤ Downdraught or blockage in
chimney.
þ −- Check Chimney for Soot build up.clean if necessary.
- Ensure chimney height is sufficient and cap is not
affected by any nearby obstructions.
- Room is in negative pressure.Increase fresh air supply.
Check draught with draught meter and adjust if not to
requirements. See page 4.
¤ Oil flow is too low on 1 setting. þ −- Adjust low flow rate while control is set on “1", call your
installer.
¤ Stove is not level. Flame
imbalance. −- Check level.Adjust if necessary.
¤ Catalyser not centered. Uneven
fuel distribution resulting in
secondary air shortage.
−- Center catalyser assembly
¤ Insufficient fuel. −- Check that the de-scaler, the float regulator filter and
burner pot are cleaned.
¤The draughtregulator isblockedin
open position
þ −- Unlock the draught regulator.
- Check the float regulator adjustment and refit, if
necessary.
Coke build up noticed. ¤ Excessive air supply. −- Adjust draught.
þ : This sign means that you should
asked for a qualified engineer to do
the work.
Document n° 979-3 EN ~ 28/02/2000
174 05 05 BELFORT Oil fired stove
10 Technical manual

4.Spare parts
When ordering spare parts, please indicate : model n°,
colour code, description of the part, code of the part.
Example : Stove 174 05 05 , base 352155 EF
Y= 174 05 05 Y J= 174 05 05 J
K= 174 05 05 K C= 174 05 05 C
N° Code Description ............. Type.........Y .....J .....K .....C ...... Qty
1 100917 Cam pin ...............12x20M7 .......Y .....J .....K .....C .......01
2 104708 Plug ...............................Y .....J .....K .....C .......01
3 905328 Complete burner ............C4 .........Y .....J .....K .....C .......01
4 109552 Cap ...............................Y .....J .....K .....C .......04
5 109718 Chain ..............................Y .....J .....K .....C .......01
6 110105 Barometric damper .......................Y .....J .....K .....C .......01
7 110404 Hinge pin ............... 6x30.........Y .....J .....K .....C .......02
8 119215 Descaler ............................Y .....J .....K .....C .......01
9 122204 Winged nut ..............diam.8 ........Y .....J .....K .....C .......02
10 134258 Bushing .............................Y .....J .....K .....C .......01
11 134601 Pin ................... 2x20.........Y .....J .....K .....C .......01
12 142301 Adhesive rope .........................Y .....J .....K .....C ......0,90m
13 142316 Gasket .................7x3 .........Y .....J .....K .....C ......0,55m
14 142327 Gasket .............................Y .....J .....K .....C .......01
15 149868 Knob ..............................Y .....J .....K .....C .......01
16 161026 Touch-up paint .......................................K ..............01
16 161027 Touch-up paint ................................J .....................01
16 161032 Touch-up paint ..............................................C .......01
17 162550 Descriptive plate ........................Y .....J .....K .....C .......01
18 164205 Oil-tight nut ...........................Y .....J .....K .....C .......02
19 165145 Float regulator .........................Y .....J .....K .....C .......01
20 179617 Regulator shaft .........................Y .....J .....K .....C .......01
21 181614 Ceramic rope ............. d.9,5.........Y .....J .....K .....C ......2,18m
22 181615 Ceramic rope ............. d.12.........Y .....J .....K .....C ......1,35m
23 188818 Glass ..............................Y .....J .....K .....C .......01
24 189118 Screw ................. d.10.........Y .....J .....K .....C .......01
25 199204 Regulator filter .........................Y .....J .....K .....C .......01
26 198205 Catalyser ring .........................Y .....J .....K .....C .......01
27 194401 Catalyser cover .........................Y .....J .....K .....C .......01
28 194403 Catalyser body .........................Y .....J .....K .....C .......01
30 905327 Basic burner ..........................Y .....J .....K .....C .......01
31 205389 Back panel ...........................Y .....J .....K .....C .......01
32 209916 Protector ............................Y .....J .....K .....C .......01
33 222560 Flue baffle ...........................Y .....J .....K .....C .......01
34 222611 Suppl. flue baffle ........................Y .....J .....K .....C .......01
35 236708 94 Bracket .............................Y .....J .....K .....C .......01
36 239715 60 Carburettor support ......................Y .....J .....K .....C .......01
37 259015 Fixing plate ...........................Y .....J .....K .....C .......04
38 260583 60 Heat shield ...........................Y .....J .....K .....C .......01
39 446302 Shield ..............................Y .....J .....K .....C .......01
40 300118 MJ Leg .............................................K ..............04
40 300118 MK Leg ....................................................C .......04
40 300118 EF Leg ...............................Y ............................04
40 300118 79 Leg ......................................J .....................04
41 300483 Base ..............................Y .....J .....K .....C .......01
42 301526 MJ Door lock ..........................................K ..............01
42 301526 MK Door lock .................................................C .......01
42 301526 EF Door lock ............................Y ............................01
42 301526 79 Door lock ...................................J .....................01
43 303301 EF Bearing .............................Y .....J .....K .....C .......01
44 303726 MJ Blanking plate .......................................K ..............01
44 303726 MK Blanking plate ..............................................C .......01
44 303726 EF Blanking plate .........................Y ............................01
44 303726 79 Blanking plate ................................J .....................01
45 303829 MJ Flue collar .........................................K ..............01
45 303829 MK Flue collar ................................................C .......01
45 303829 EF Flue collar ...........................Y ............................01
45 303829 79 Flue collar ..................................J .....................01
46 909401 Sliding door ...........................Y .....J .....K .....C .......01
47 306279 EF Back wall ............................Y .....J .....K .....C .......01
48 309898 MJ Front plate .........................................K ..............01
48 309898 MK Front plate ................................................C .......01
48 309898 EF Front plate ...........................Y ............................01
48 309898 79 Front plate ..................................J .....................01
49 309997 MJ Main door ..........................................K ..............01
49 309997 MK Main door .................................................C .......01
49 309997 EF Main door ............................Y ............................01
49 309997 79 Main door ...................................J .....................01
50 310724 MJ R. side panel ........................................K ..............01
50 310724 MK R. side panel ...............................................C .......01
50 310724 EF R. side panel ..........................Y ............................01
50 310724 79 R. side panel .................................J .....................01
51 310822 MJ L. side panel ........................................K ..............01
51 310822 MK L. side panel ...............................................C .......01
51 310822 EF L. side panel ..........................Y ............................01
51 310822 79 L. side panel .................................J .....................01
52 312631 Burner support .........................Y .....J .....K .....C .......01
53 321903 Rim ...............................Y .....J .....K .....C .......01
Document n° 979-3 EN ~ 28/02/2000
Oil fired stove BELFORT 174 05 05
Technical manual 11

1
2
3
4
5
6
764
10
11
12
13
14
15
16
17
18 19
20
21
22
23
24
25
26
27
28
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
13
61
62
63
7
9
21
67
8
66
65
Document n° 979-3 EN ~ 28/02/2000
174 05 05 BELFORT Oil fired stove
12 Technical manual

54 327802 Clamp ..............................Y .....J .....K .....C .......01
55 327902 MJ Ash-tray ...........................................K ..............01
55 327902 MK Ash-tray ..................................................C .......01
55 327902 EF Ash-tray .............................Y ............................01
55 327902 79 Ash-tray ....................................J .....................01
56 352155 MJ Top plate ..........................................K ..............01
56 352155 MK Top plate .................................................C .......01
56 352155 EF Top plate ............................Y ............................01
56 352155 79 Top plate ...................................J .....................01
57 808001 ED Hand tool ............................Y .....J .....K .....C .......01
58 982629 Feed line regulator-burner ...................Y .....J .....K .....C .......01
59 982630 Vent-pipe ............................Y .....J .....K .....C .......01
60 818301 Grate ..............................Y .....J .....K .....C .......01
61 307436 Fuel retainer ..........................Y .....J .....K .....C .......01
62 109722 Ceramic coal ............45x45x30 .......Y .....J .....K .....C .......35
63 242913 Ground vat ...........................Y .....J .....K .....C .......01
64 262218 Shield ..............................Y .....J .....K .....C .......01
65 124412 Strut ...............................Y .....J .....K .....C .......02
66 262606 60 Shield ..............................Y .....J .....K .....C .......01
67 202801 Support .............................Y .....J .....K .....C .......01
Document n° 979-3 EN ~ 28/02/2000
Oil fired stove BELFORT 174 05 05
Technical manual 13

§Warranty certificate §
§ Legal warranty
Our products are guaranteed for twelve months against any
defect, flaw or imperfection. During this time, all parts judged
defective by our Warranty control department may be repla-
ced in our workshops. Incidental costs of transportation and
packing payable by the buyer.
Some parts or components have a longer warranty period :
- Cast-iron shell of boiler : 3 years
- Steel shell of boiler : 3 years
- Removable or independent stainless steel hot water cylin-
der : 5 years
- Independent enamelled steel hot water cylinder : 3 years
- Incorporated circulating pump : 2 years.
§ Terms of the warranty
Thiswarrantyisonlyvalidif:
- The unit has been installed and checked by a professional
installer before operating,
- All installation and adjustment instructions listed in the
technical manual supplied with the unit have been followed,
- All operation and maintenance instructions have been
followed.
This warranty does not cover :
- Lamps, fuses, spark plugs, cast iron parts directly in con-
tact with burning coal and wood, firebricks, flue baffles,
glasses .
- Any damage resulting from the use of fuel not recommen-
ded in our instructions ;
- Parts which are damaged by external causes such as
unadapted chimneys, thunderstorms, damp, faulty pressure
or fail in pressure, thermic anomalies, explosions, etc...
- Electrical parts which are deteriorated by any connection
or use on a supply circuit with voltage within 10% of the
indicted voltage (230 V in EU).
Material subject to modifications without prior notice. This
manual does not engage the responsibility of
FRANCO BELGE.
* Nameandaddressoftheinstaller: _____________________________
______________________________________________
( Telephone: _______________________________________
* Name and address of the customer : _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
______________________________________________
Date of installation : __ __ / __ __ /__ __ __ __
Model of the appliance :
Color :
Serial number : ___ ___ ___ ___ ___ ___
• This certificate has to be completed and kept carefully.
In case of claims, send a copy of this to :
Les Fonderies Franco-Belges, rue Orphée Variscotte, 59660 MERVILLE, FRANCE.
Document n° 979-3 EN ~ 28/02/2000
❑1740505
❑Y❑J❑K❑C

Teknisk manual
må oppbevares
av eier
for fremtidig bruk
Document n° 979-3 NO ~ 28/02/2000
Les Fonderies Franco-Belges
F 59660 MERVILLE
Téléphone : 03.28.43.43.43
Fax : [phone]
RC Hazebrouck 445750565B
Matériel sujet à modifications sans préavis
Document non contractuel.
Belfort
Parafinkamin
Modell 174 05 05
Norsk DBE Godkjenning no. 006 - 160
Beskrivelse av kaminen
Installasjonsveiledning
Bruksanvisning
Reservedeler
Garanti Sertifikat
English
Norsk
Norsk Importør :
Hydro Texaco AS , Telefon [phone]
Drammensveien 134, Skøyen
0212 Oslo

Beskrivelse av kaminen .......................................3
Beskrivelse ..................3
Emballasje...................3
Tekniskedata.................3
Brukerveiledning ...............4
Installasjonsveiledning........................................4
Plasseringavkaminen ............4
Pipe ......................5
Monteringavjusterbareben .........5
Røkuttak på toppen ..............5
Røkuttakbak .................5
Pipetilkobling .................6
Røykavtrekk, Forholdet til myndigheter . . . 6
Tilknytningtiloljetank/dagtank........6
Oppretting...................6
Kontrollførbruk................6
Justeringavoljetilførsel ...........7
Trekkipipe ..................7
Justeringavdørtetthet............7
Vedlikehold av pipe ..............7
Bruksanvisning ............................................8
Brensel.....................8
Opptenning ..................8
Reglerforbruk ................8
Avstenging ...................8
Vedlikehold av kaminen ...........9
Anbefaling ...................9
Feilsøking.................. 10
Reservedeler .............................................11
INNHOLD side side
FRANCO BELGE gratulerer Dem med Deres valg.
FRANCO BELGE garanterer kvaliteten på sine apparater, alle ISO 9001 godkjent, og
forplikter seg til å tilfredstille kundenes ønsker.
Med mer enn 75 års erfaring bruker FRANCO BELGE alltid de mest avanserte teknologier
i fremstillingen og produksjonen av serien med varmeapparater.
Dette dokumentet vil hjelpe Dem med å installere og benytte deres nyanskaffede
varmeapparat på best mulig måte, komfortabelt og sikkert.
Document n° 979-3 NO ~ 28/02/2000
Parafinkamin BELFORT 174 05 05
2 Teknisk manual

1.Beskrivelse av kaminen
1.1. Beskrivelse
Kamin for flytende brensel, med fordampningsbrenner
(Norm EN1) - kun for fyringsparafin.
1.2. Emballasje
¤1kamin.
1.3. Tekniske data
Modell...................... 1740505
Nominell varmeytelse . . . . . . . . . . . . kw 5
Oljeforbruk ved
- maksimum effekt . . . . . . . . . . liter/time 0,58
-minimumeffekt ...........liter/time 0,17
Oljekvalitet
- Fyringsparafin . . . . . . . . . . .mm2/s cSt 1,8
Nødvendig trekk i pipe ved
- maksimum effekt . . . . . . . . . . . . . Pa 15
-minimumeffekt .............. Pa 8
Vekt ..................... kg 67,6
392
340 182
Ø 120/127
452
530
558
420
Fig. 1 - Minimumsavstander
A - Avstand til brannmur 100 mm
B - avstand til brennbart materiale ved avslutning av
brannmur 300 mm.
C - avstand til brennbart materiale uten brannmur
600 mm.
Fig. 2 - Dimensjoner i mm
Document n° 979-3 NO ~ 28/02/2000
174 05 05 BELFORT Parafinkamin
Teknisk manual 3

1.4. Brukerveiledning
Parafin ledes til brennerbunnen (Fig. 3) hvor den
antennes ved hjelp av opptenningsvæske. Varmen som
blir produsert av denne flammen, bringer temperaturen
i brenner til det nivå som er nødvendig for å fordampe
brennstoffet. Parafinen brenner bare som damp, ikke i
flytende form.
Luft til forbrenningen kommer til brenneren gjennom
hull for luftinntak.
I sentrum av brenneren sitter katalysatoren (Fig. 3, nr.4)
som hjelper til å fordampe parafinen. Når ovnen er i drift
gløder katalysatoren rødt. Kaminen skal ikke brukes
uten både katalysator (Fig. 3, nr. 4), katalysator topp
(nr. 3) og katalysator ring (nr. 2).
Hendel for brenner (Fig. 3, nr. 7) kan skyves og trekkes
innogutogsamtidigdreieslettforåholde
tilførselsrøret fritt for oppbygging av karbon.
Oljeregulatoren inneholder et filter for å fange opp
urenheter.
En sikkerhetshendel styrer parafintilførselen. Parafin
kan bare renne inn i flottørkammeret når
sikkerhetshendelen er trykket ned.
Variasjoner i oljetemperatur påvirker hvordan oljen
strømmer inn iflottørkammeret. En flottør i kammeret vil
holde konstant oljemengde tilgjengelig for brenneren.
Flottørregulator styres også av etregulatorhåndtak som
kan stilles fra ”0” (av) til ”6” (høyeste effekt).
En trekkregulator (Fig. 12, nr. 1) sikrer stabil lufttilførsel
til brenneren.
2.Installasjonsveiledning
NB!! FØR INSTALLASJONEN PÅBEGYNNES MÅ
DET SØKES OM GODKJENNELSE FRA
BYGNINGS-RÅDET, REF. PLAN- OG
BYGNINGSLOVENS § 7d & 93e. ARBEIDET KAN
KUN PÅBEGYNNES NÅR TILLATELSE ER GITT.
FOR PRAKTISK VEILEDNING AV INSTALLASJON
HENVISES DET TIL: “Veiledning om fyringsanlegg for
flytende og gassformig brensel”.
HR- 2012 ISBN 82-7768-031-7.
2.1. Plassering av kaminen
Kaminens plassering må velges med omhu for å få best
mulig varmedistribusjon. Plasser kaminen i
overensstemmelse med kravene til
minimumsavstander til brennbart materiale.
Avstand fra ildstedet til brannmur må være min. 100
mm, og brannmur skal være så stor at nærmeste punkt
på ildstedets skall eller røkrøret ikke kommer nærmere
enn 300 mm. til brennbart materiale.
Alternativt kan ildstedet oppstilles uten brannmur, men
da med min. avstand på 600 mm til brennbart materiale.
Krav til brannmur er at den skal være min. 100 mm tykk
og skal være utført i teglsten, betong eller lettbetong.
- Plasser ikke kaminen direkte på gulvtepper eller
belegg. Kaminen leveres med sikkerhetskar som alltid
skal benyttes.
Luft utenfra. Forå få kaminen til fungere tilfredsstillende
er tilstrekkelig lufttilførsel til forbrenningen påkrevet.
1
2
3
4
57
1
2
4
5
3
6
7
8
9
10
Fig. 3 - Brenneren
1 - Luftåpning
2 - Katalysatorring
3 - Katalysatordeksel
4 - Katalysatorstamme
5 - Brennerbunn
7– Håndtak for brenner
Fig. 4 - Beskrivels
1 - Dekkplate
2 - Hoveddør
3 - Røkrørkrage
4 - Skjermplate
5 - Askeskuff
6 - Sikkerhetsluke
7 - Supl. skjermplate
8 - Trekkregulator
9 - Keramisk kull
10 - Kullrist
Document n° 979-3 NO ~ 28/02/2000
Parafinkamin BELFORT 174 05 05
4 Teknisk manual

2.2. Pipe
Påse at røkrøret har tilstrekkelig trekk. (Se tekniske
spesifikasjoner).
Minimum røkrørdiameter 10 cm.
Pipenmåværeminimum4,5m.høy.
Røkrøret må ikke deles med noen annen installasjon.
Fallvind forårsaket av hindringer nær pipetoppen kan i
enkelte tilfeller forhindres ved å plassere en
fallvindavskjermende hatt på pipen.
Pipen må ha et konstant tverrsnitt. For stort røkløp kan
påvirke trekken.
Pipen må være skikkelig bygget, for å hindre
innstrømming av kald luft.
Pipen må være godt isolert, samt vann- og lufttett. En
pipe med kald innvendig overflate kan forhindre god
trekk, og forårsake kondens.
Røkrøret må feies minst en gang pr.år.
2.3. Montering av justerbare ben
Fest de medfølgende 4 skruer og hetter (på brenneren)
på hvert sitt ben. (Fig. 8).
2.4. Røkuttak på toppen
Fig. 5
-Åpne hoveddøren og ta ut risten med de keramiske
kullene(Fig.4,nr.9og10),ogtautdenindre
skjermplaten (Fig. 4, nr. 4 og 7).
- Fest pakningsrepet i sporet, og skru fast røkrørflensen
med de medfølgende to skruer og skiver. Påse at det er
god tetting.
- Sett den indre skjermplaten tilbake på plass
Utsparingen i det bakre varmeskjoldetmå ikke fjernes.
2.5. Røkuttak bak
Fig. 7
-Åpne hoveddøren og ta ut risten med de keramiske
kullene(Fig.4,nr.9og10),ogtautdenindre
skjermplaten (Fig. 4, nr. 4 og 7).
- Ta av bakdekselet og ta ut utsparingen i det.
- Ta ut dekkplaten (5) og klemmen (4) fra bakveggen, og
fest disse på toppen med de medfølgende skruer og
skiver. Påse at det er god tetting.
- Fest pakningsrepet i sporet og monter røkrøret med
de mefølgende skruer og skiver.
- Monter innvendig skjermplate
- Monter bakdekselet
3
1
2
7
5
21
3
4
6
Fig. 5 - Røkutløp på toppen
1-Røkrør
2 - Pakning
3 - Skruer, skiver og
muttere
Fig. 6 - Bakdeksel
Fig. 7 - Røkuttak bak
1 - Røkrørkrage
2 - Pakningsrep
3 - Bakplate
4-Klemme
5 - Dekkplate
6 - Skruer, skiver og
muttere
7 - Skruer og skiver
Fig. 8 - Montering av justerbare ben
Document n° 979-3 NO ~ 28/02/2000
174 05 05 BELFORT Parafinkamin
Teknisk manual 5

2.6. Pipetilkobling
- Kaminen må plasseres så nær pipen som mulig.
Unngå horisontale røkrørtilkoblinger, som drastisk kan
begrense kaminens funksjon.
- Tilkoblingsrøret må være av godkjent type. Maksimal
diameter på 127 mm. Det er installatørens ansvar å
følge krav til lokale myndigheter og forskrifter gjeldende
for installasjonen.
- Når kaminen er ferdig installert, må pipetrekken
kontrolleres med en trekkmåler. Hvis pipetrekken er for
stor eller uregelmessig, må det installeres en
trekkstabilisator (barometrisk demper) i røkavtrekk
(skorstein).
2.7. Røykavtrekk, Forholdet til
myndigheter
Fyringsanlegg for flytende brensel må tilknyttes
røykkanal, jf. Krav i tekniske forskrift til plan- og
bygningsloven § 9 – 21 pkt. 1 og 2.
2.8. Tilknytning til oljetank/dagtank
Anlegget tilknyttes manuell eller automatisk dagtank.
Det henvises til “Veiledning om fyringsanlegg for
flytende og gassformig brensel” HR-2012 ISBN
82-7768-031-7. Se vedlegg 2, side 53 og vedlegg 4,
side 55, Eksempler på oljefyringsanlegg.
Når kaminen er forbundet med en ekstern eller
fjerntliggende tank, må kaminen festes til gulvet.
Hvis lagertanken er mer enn 3,5 meter over kaminen,
må det installeres en trykkreduksjonsventil i
oljeledningen. (Se fig. 11).
Hvis lagertanken er lavere enn kaminen må det
benyttes oljeløftingsanlegg. (Se fig. 11)
2.9. Oppretting
Det er viktig at kaminen er i vater. Juster benene
(Fig. 8). Bruk et vater over brennerpotten for å
kontrollere. (Fig. 10)
2.10. Kontroll før bruk
Kontroller at alle sammenføyninger er tette, at døren
lukker korrekt, at vinduet ikke er skadet og at det i
røkgangene ikke finnes emballasje eller løse deler. Alle
løstagbare deler, oljeoppsamler og røkfører må være
riktig montert.
A
1
5
3
6
2
4
Fig. 9 - Montering av askeskuff
Fig. 10 - Kontroller at brenner er i vater
Fig. 11
1-Maks.3,5m
2 - Min. 0,25 m
3 - Utvendig oljetank
4 - Ventil
5 - Oljeløfter med
reservetank maks. 20
liter.
6-Rør
Document n° 979-3 NO ~ 28/02/2000
Parafinkamin BELFORT 174 05 05
6 Teknisk manual