Freelap Tx Pad Pro User manual

Tx Pad Pro
The Tx Pad Pro has a 3.7V 320mAH LiPo rechargeable battery.
•Low battery indicator: When the battery becomes low, the LED flashes red.
•Recharging the battery:
- Insert the magnetic USB cable into the USB port located on the side of the transmitter.
- It is recommended to make complete charges (charging time: 2h).
- When the battery is fully charged, the device has a battery life of 300h.
- The Tx Pad Pro has an automatic shutdown function (after 12h), to save the battery.
• Weight: 130 g
• Dimensions: 170 x 100 x 15 / 3 mm
• Start zone dimension: Diameter 30 mm
• Compatibility: FxChip / FxChip BLE
• Transmitter with 1 code: START
• Detection field: 1.5 meters
• Minimum time between 2 transmitters: 0,7 second
• Accuracy: 1/100 of a second
• Battery: 3.7V 320mAH LiPo rechargeable battery, automatic shutdown after 12h
• Battery life: 300 hours
• Water resistance: IP67
• Operating temperatures: -20°C to +50°C
Find our FAQ (Frequently Asked Questions), as well as other manuals and user guides,
on our website at: www.freelap.com/support
If you cannot find the answers to your questions, please contact your Freelap dealer.
Find the list of Freelap dealers at: www.freelap.com/freelap-contact
The Tx Pad Pro is guaranteed 2 years. If you have any questions or if you need
assistance with your device, please contact your Freelap dealer.
Further information
Battery and battery life
Technical sheet
Technical support
After-sales service & warranty
V060623
FREELAP SA
Av. D.-Jeanrichard 2A CH-2114 Fleurier – Switzerland
[phone] - www.freelap.com
@freelap

About the Tx Pad Pro
Use of the Tx Pad Pro
Tx Pad Pro is the premium Freelap transmitter, specially made for block starts and
3-point starts. Easy to use, it is placed on ground on the start line. As soon as the
athlete removes his finger from the transmitter, the chip timer is instantly triggered with
a high accuracy.
1. Prerequisites
Tx Pad Pro transmitter is a part of the Freelap timing system. To get your timing data,
you must attach the transponder to the athlete and use the MyFreelap app (cf
corresponding user manuals).
2. Get to know your device
To activate the transmitter, press the Power button for 1 second.
The green LED confirms that the transmitter is activated.
Place the Tx Pad Pro on the ground, on the start line.
Power button: Turns on / off the transmitter
Start zone: triggers the start (when released).
LED: Indicates if the device is On (green light)
Indicates if the battery is low (red light)
Magnetic USB port: To charge the device
3. Turn it on
4. Place it on the track
5. Associate it with other Freelap transmitters
• Put yourself in the starting position by keeping your finger pressed inside the Start
zone of the transmitter.
• Remove quickly your finger and start the race. The Tx Pad Pro’s led will blink and it
will instantly start the timer of your transponder.
Placing the transmitters at any other location or position may result in
inaccuracies or non-detection.
Example 2 : Timing 100m (2x50m) - 2 athletes
7. Trigger the start
6. Use Tx Pad Pro on adjacent lanes
Tx Junior Pro
code FINISH
Tx Junior Pro
code LAP
Tx Pad Pro
50.80 m0 m 100.80 m
1
2
PWR START LAP FINISH PWRSTART LAP FINISH
Appareil
mobile
50m max
Example n°1 : Timing 100m (2x50m) - 1 athlete
100.80 m0 m
Tx Pad Pro Tx Junior Pro
code FINISH
• Tx Pad Pro is a START transmitter. To make Freelap system work, you must have a
transmitter set with the code FINISH on your track, so:
- You must add one FINISH transmitter (e.g: 1 Tx Junior Pro transmitter set with the
code FINISH), placed 80cm AFTER the desired distance.
- You can add more Freelap transmitters (e.g: 1 Tx Junior Pro transmitter set with the
code LAP to get intermediate LAP times), placed 80cm AFTER the desired distance.
• The Tx Pad Pro must be at a minimum time of 0.7 second from the next transmitter.
• Your track must contain a maximum of 11 transmitters.
Tx Junior Pro
code LAP
1
50.80 m
PWR START LAP FINISH PWRSTART LAP FINISH
Mobile
device
50m max