Frico Tiger User manual

.... 19
RU
.... 11
FR
.... 9
NO
.... 7
GB
.... 5
SE
.... 17
NL
....15
FI
.... 13
DE
Tiger 20-30 kW
Original instructions

Fig. 1
P203, P303, P305
AC
B
A
[mm]
B
[mm]
C
[mm]
P203, P303, P305 630 590 600
2
Tiger 20-30 kW

∼
°C
M
2
1
LL L
123
Tiger 20 kW P203 230V3~ /400V3~
400V 3~ / 230V 3~
12
400V 3~
230V 3~
400V 3~
°C
Low speed High speed
∼
°C
M
2
1
LL L123
Tiger 30kW P303 230V3~ /400V3~
Tiger 30kW P305 440/500V3~
400V 3~ / 230V 3~
12
400V 3~400V 3~
°C
400V 3~
230V 3~
3
3/3
2/3
1/3
0
3
LL
123
440V 3~ / 500V 3~
440V
500V
L
Low speed High speed
Tiger 20 kW
Tiger 30 kW
3
Tiger 20-30 kW

Technical specifications | Fan heaterTiger, 20 and 30 kW 3
Type EL-nr Output
steps
[kW]
Airflow
[m³/h]
Sound
level*1
[dB(A)]
∆t*2
[°C]
Voltage
[V]
Amperage
[A]
HxWxD
[mm]
Weight
[kg]
P203 49 307 28 0/10/20 1900/2600 60 31/23 400V3~ 29.5 590x630x600 26
P20323 49 307 29 0/10/20 1900/2600 60 31/23 230V3~ 50 590x630x600 26
P303 49 307 30 0/10/20/30 1900/2600 52 47/34 400V3~ 43.9 590x630x600 30
P30323 49 307 31 0/10/20/30 1900/2600 52 47/34 230V3~ 75 590x630x600 30
P305*40/7.5/15/23
0/10/20/30 1900/2600 52 36/26 47/34 440V3~*3 500V3~ 30.8 35.1 590x630x600 30
*1) Conditions: Distance to the unit 3 metres. Directional factor: 2. Equivalent absorption area: 200 m².
*2) ∆t = temperature rise of passing air at maximum heat output and lowest/highest air flow.
*4) Can be connected to 440V3~ and 500V3~
Protection class: IP44.
CE compliant.
GB: Technical specifications
SE: Tekniska data
NO: Tekniske data
FR: Caractéristiques techniques
DE: Technische daten
FI: Tekniset tiedot
NL: Technische specificaties
RU: Технические характеристики
GB: Output steps
SE: Effektsteg
NO: Effekttrinn
FR: Puissances
DE: Abgabestufen
FI: Tehoportaat
NL: Capaciteit
RU: Ур. мощности
GB: Airflow
SE: Luftflöde
NO: Luftstrøm
FR: Débit d’air
DE: Luftmenge
FI: Ilmavirta
NL: Luchtstroom
RU: Расх.возд.
GB: Sound level
SE: Ljudnivå
NO: Lydnivå
FR: Niveau sonore
DE: Geräuschpegel
FI: Melutaso
NL: Geluidsniveau
RU: Ур. шума*1
GB: Voltage
SE: Spänning
NO: Spenning
FR: Tension
DE: Spannung
FI: Jännite
NL: Voltage
RU: Напряжение
GB: Amperage
SE: Ström
NO: Strøm
FR: Intensité
DE: Strom
FI: Virta
NL: Stroomsterkte
RU: Сила тока
GB: Weight
SE: Vikt
NO: Vekt
FR: Poids
DE: Gewicht
FI: Paino
NL: Gewicht
RU: Вес
*1) Förutsättningar: Avstånd till aggregat 3 meter. Riktningsfaktor: 2. Ekvivalent absorptionsarea: 200 m².
*2) ∆t = temperaturhöjning på genomgående luft vid maximal värmeeffekt och lägst respektive högst luftflöde.
*3) Kan anslutas till 440V3~ och 500V3~.
Kapslingsklass: IP44. CE-märkt.
*1) Forutsetninger: Avstand til aggregat: 3 meter. Retningsfaktor: 2. Ekvivalent absorpsjonsareal: 200 m².
*2) ∆t = temperaturøkning på gjennomgående luft ved maksimal varmeeffekt, og laveste respektive høyeste luftstrøm.
*3) Kan kobles til 440V3~ og 500V3~.
Kapslingsklasse: IP44. CE-merket.
*1) Conditions : Distance à l’appareil : 5 mètres. Facteur directionnel : 2. Surface d'absorption équivalente : 200 m2.
*2) ∆t = augmentation de température de l'air en débit mini/maxi, sous une puissance maximale.
*3) Peut être connecté 440V3~ ou 500V3~.
Indice de protection: IP44. Marquage CE.
*1) Bedingungen: Abstand zum Gerät 3 Meter. Richtungsfaktor: 2. Äquivalente Absorptionsfläche: 200 m².
*2) ∆t =Temperaturanstieg der vorbeiströmenden Luft bei max. Heizleistung und niedrigstem/höchstem Volumenstrom.
*3) Kann an 440V3~ und an 500V3~ angeschlossen werden.
Schutzart: IP44. CE-konform.
*1) Mittausjärjestelyt: Etäisyys laitteeseen 3 metriä. Suuntakerroin: 2. Ekvivalentti absorptioala: 200 m².
*2) ∆t = läpivirtaavan ilman lämpötilan nousu suurimmalla lämmitysteholla ja pienimmällä/suurimmalla ilmavirralla.
*3) Voidaan kytkeä 440V3~ ja 500V3~ jännitteeseen.
Kotelointiluokka: IP44. CE-merkitty.
*1) Condities: Afstand tot de unit 3 meter. Richtingsfactor: 2. Equivalent absorptiegebied: 200 m².
*2) ∆t =Temperatuurstijging van de passerende lucht op maximale verwarming en laagste/hoogste luchtstroom.
*3) Kan worden aangesloten op 440V3~ en 500V3~.
Beschermingsklasse: IP44. Voldoet aan CE.
*1) Условия: Расстояние от тепловентилятора 3м. Фактор направленности: 2. Эквивалентная площадь звукопоглощения: 200м2.
*2) ∆t = увеличение температуры проходящего воздуха при полной мощности.
*3) Может подключаться к сети 440В3~ или 500В3~.
Класс защиты: IP44. Cертифицированы ГОСТ, стандарт CE.
4
Tiger 20-30 kW

°C
°C
°C
7
Tiger 20-30 kW GB
General Instructions
Read these instructions carefully before
installation and use. Keep this manual for
future reference.
The product may only be used as set out in
the assembly and operating instructions. The
guarantee is only valid if the product is used
in the manner intended and in accordance
with the instructions.
Application area
Tiger is a range of robust and compact fan
heaters for professionals with high demands.
The Tiger fan heater is portable. Tiger 20
and 30 kW are ideal for heating and drying
larger premises such as industrial premises
and workshops, where higher outputs are
required.
Protection class: IP44.
Electrical installation
The Tiger fan heater is equipped with a 1.8
metre long connection cable. P203, P303,
P305 are supplied with a cable without a plug.
P305 can be connected to both 440V3~ and
500V3~.
Start-up (E)
When the unit is used for the first time or
after a long period of disuse, smoke or odour
may result from dust or dirt that has collected
on the element. This is completely normal
and disappears after a short time.
Operation
Position of the output selector, see
Technical data.
Working range of the thermostat 5 - 35 °C.
The mode selector has two different fan speed
positions.
If the unit does not work the first time it
is used, the temperature cut-out may have
tripped during transport. See “Overheating”.
Mounting
The Tiger fan heater is portable.
Overheating
If the unit overheats the in-built temperature
cut-out will trip. Reset the temperature cut-
out once the unit has cooled and the fault has
been rectified. (Fig. 1).
NOTE! All work inside the unit’s connection
area must be carried out by a qualified
technician and while the unit is not voltage
fed.
Maintenance
Normally the heater fans do not require any
maintenance. Dirt and dust can however
cause overheating and represent a fire risk.
Consequently, the unit should be cleaned
periodically.
Residual current circuit breaker (E)
When the installation is protected by means
of a residual current circuit breaker, which
trips when the appliance is connected,
this may be due to moisture in the heating
element. When an appliance containing a
heater element has not been used for a long
period or stored in a damp environment,
moisture can enter the element.
This should not be seen as a fault, but is
simply rectified by connecting the appliance
to the mains supply via a socket without a
safety cut-out, so that the moisture can be
eliminated from the element. The drying
time can vary from a few hours to a few days.
As a preventive measure, the unit should
occasionally be run for a short time when it is
not being used for extended periods of time.
Assembly and operating instructions

8
Tiger 20-30 kW
GB
Safety
• Forallinstallationsofelectricallyheated
products should a residual current circuit
breaker 300 mA for fire protection be used.
• Theunitmustnotbeusedinthe
immediate vicinity of baths, showers,
washbasins or swimming pools.
• Duringoperationthesurfacesoftheunit
are hot
• Theunitmustnotbepositionedsothat
inflammable materials as overheating can
represent a fire risk
• Theunitmustnotbepartlyorfully
covered with clothes or similar material as
overheating can represent a fire risk
• Theunitmustnotbeplaceddirectlyunder
a permanent wall socket
• Thisapplianceisnotintendedforuseby
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety. Children should be supervised
to ensure that they do not play with the
appliance.

Art.nr: 201226 2013-05-23 HH/SÄ
Main office
Frico AB Tel: [phone]
Box 102 Fax: [phone]
SE-433 22 Partille [email protected]
Sweden www.frico.se
For latest updated information and information
about your local contact: www.frico.se