Front Runner LASS026 User manual

LASS026_REV_A02 © 2020 FRONT RUNNER VEHICLE OUTFITTERS
LASS026
ENG
1
universal Load Bed
legs 188mm (PaiR)
Thank you for purchasing a Front Runner Universal Load Bed Legs.
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.
Refer to Page 2 for a list of all the components, quantities and tools required.
READ ME !
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
Please call us if you have any questions about the installation of this product.

LASS026_REV_A02 2 © 2020 FRONT RUNNER VEHICLE OUTFITTERS
6
7
8
9
2
3
4
5
1
TOOLS NEEDED
1 2 X Leg
2 4 X M8 x 25 Button Head Bolt
3 4 X M8 Spring Washer
4 4 X M8 x 19 x 2SS Flat Washer
5 4 X M8 Channel Nut
6 4 X M8 Nut Cap
7 4 X M8 Nyloc Nut
8 4 X M8 x 16 x 1.6SS Flat Washer
9 4 X M8 x 25 Hex Bolt
IN THE BOX
FIGURE 1.1
5mm
GET ORGANIZED
1
13mm

LASS026_REV_A02 3
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
2
3
4
5
1
FIT AND SECURE
2
13mm
2.1
2.2
Loosely assemble the M8 Channel Nuts
(Item 5) to the Legs (Item 1) using M8 x 25
Button Head Bolts, M8 Spring Washers and
M8 x 25 x 2SS Flat Washers (Items 2, 3 & 4)
as shown.
Slide the required number of Leg
Assemblies into the Universal Load Bed
Track as shown.
In some cases the Channel Nut may need
dressing with a file to remove high spots
and to insure it slides smoothly in the
track.
The M8 Channel Nut will rotate at an angle
in the Track when fastening.
The remaining fasteners will be used
when mounting your Load Bars or Tray to
the Universal Load Bed Legs.
13mm
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
4
Now's the time to visit your favorite Front Runner Dealer in person or online.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
Share your adventures on:
FINISH
3
Congratulations! You did it. Take a step back and admire your work!
5mm