Front Runner RRAC129 User manual

RRAC129_REV_A00 © COPYRIGHT 2017 FRONT RUNNER VEHICLE OUTFITTERS
RRAC129
ENG
1
IMPORTANT WARNING!
Thank you for purchasing Front Runner Adjustable Cargo Brackets .
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.
Refer to Page 2 for a list of all the components, quantities and tools required.
READ ME !
Adjustable Cargo Brackets
FRONT RUNNER CAN NOT RECOMMEND A MAXIMUM LOAD CARRYING CAPACITY. PLEASE REFER TO YOUR VEHICLE MANUFACTURER'S RECOMMENDATIONS. IT IS CRITICAL
THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD RESULT IN AN
AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT RUNNER PRODUCTS
TO YOUR VEHICLE. CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND DAMAGE. THEREFORE YOU
MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO INSTALLATION OR USE. IF YOU
DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY FAMILIAR WITH THE
INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.

RRAC129_REV_A00 2 © COPYRIGHT 2017 FRONT RUNNER VEHICLE OUTFITTERS
4
5
1
3
2
1 4 X Adjustable Cargo Bracket 2LH + 2RH
2 4 X M8 Eye Nut
3 4 X M8 Nylon Washer
4 4 X M8 x 16 Hex Bolt
5 1 X T-Slot Rubber 1000mm
IN THE BOX
FIGURE 1.1
LH
RH
GET ORGANIZED
1

RRAC129_REV_A00 3
© COPYRIGHT 2017 FRONT RUNNER VEHICLE OUTFITTERS
2
3
1
SECURING THE CORNERS
2
2.1
2.2
2.3
Use the T-Slot Rubber (Item 5) included
and insert into the T-Slot to help prevent
cargo from moving and to protect your rack.
Place your storage box onto the Rack
between the Adjustable Cargo Bracket .
Set the Brackets before fully tightening.
Decide where on the Rack you want to fit
your storage boxes.
Slide M8 x 16 Hex Bolts (Item 4) in the
choosen slats. Loosely fit the Adjustable
Cargo Bracket (Item 1) using an M8 Eye Nut
and M8 Nylon Washer. (Items 2 & 3).
Secure the storage box using a
Stratchit - STRA034 (Not Supplied).
4

RRAC129_REV_A00 © COPYRIGHT 2017 FRONT RUNNER VEHICLE OUTFITTERS 4
2
3
1
SECURING THE MIDDLE OF A FRONT RUNNER CUB OR WOLF PACK
2
2.4
2.5
2.6
Place your storage box onto the Rack
between the Adjustable Cargo Bracket.
Set the Backets before fully tightening.
Decide where on the Rack you want to fit
your storage boxes.
Slide two M8 x 16 Hex Bolts (Item 4) in the
choosen slats. Loosely fit the Adjustable
Cargo Bracket (Item 1) using an M8 Eye Nut
and M8 Nylon Washer. (Items 2 & 3).
Secure the storage box using a
Stratchit - STRA034 (Not Supplied).
4
Use the T-Slot Rubber (Item 5) included
and insert into the T-Slot to help prevent
cargo from moving and to protect your rack.

RRAC129_REV_A00 © COPYRIGHT 2017 FRONT RUNNER VEHICLE OUTFITTERS 5
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
Share your adventures on:
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
5
4
Now's the time to visit your favorite Front Runner Dealer in person or Online.
COMPLETION
3
9
4.1
Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
Please call us if you have any questions about the installation of this product.
10mm
Congratulations! You did it. Take a step back and admire your work!
3.1