Fujitsu MB95200H Series User manual

FUJITSU MICROELECTRONICS
SUPPORT SYSTEM
MCU-UM-500001-E-11
F²MC-8FX FAMILY
8-BIT MICROCONTROLLER
MB95200H/210H SERIES
BGM ADAPTOR MB2146-08-E
OPERATION MANUAL

BGM Adaptor MB2146-08-E Operation Manual V1.1
PREFACE
i
PREFACE
Thank you for purchasing the F2MC* family BGM adapter (model number: MB2146-
08-E).
The product is a development support tool for developing and evaluating applied
products which use Fujitsu microcontrollers (hereafter MCU) that have a BDSU
module.
This manual describes how to handle the F2MC family BGM adapter. Be sure to read
it before using the product.
For information on the MCU supported by this product, contact the Fujitsu sales or
support representative.
*: F2MC is the abbreviation of FUJITSU Flexible Microcontroller.
■
■■
■For your safety
This manual contains important information required for using the product safely. Be
sure to read through the manual before using the product and follow the instructions
contained therein to use it correctly.
In particular, carefully read “■Caution of the products described in this manual” at the
beginning of this manual to understand the requirements for safe use of the product
before using it. After reading the manual, keep it handy for future reference.
■
■■
■Related manuals
You should refer to the following manuals as well:
“HARDWARE MANUAL” for each type of microcontroller
“DATA SHEET” for each type of microcontroller
“SOFTUNE Workbench OPERATION MANUAL”
“SOFTUNE Workbench USER’S MANUAL”
“SOFTUNE Workbench COMMAND REFERENCE MANUAL”
■
■■
■European RoHS compliance
Products that have a “-E” suffix at the end of the part number are products that
conform to the European RoHS. Consult a Fujitsu sales or support representative for
details on the products that are RoHS compliant.
Products that have a “-E” suffix on the part number have the same functionality as
products with the same part number but without the “-E” suffix (RoHS non-compliant
products).

BGM Adaptor MB2146-08-E Operation Manual V1.1
PREFACE
ii
■
■■
■Caution of the products described in this document
The following precautions apply to the product described in this manual.
Indicates a potentially hazardous situation which, if not avoided appropriately, could result in
death or serious injury and/or a fault in the user’s system
Electric shock,
Damage
Before performing any operation described in this manual, turn off all the power supplies
to the system. Performing such an operation with the power on may cause an electric
shock or device fault.
E
lectric shock,
Damage
Once the product has been turned on, do not touch any metal part of it. Doing so may
cause an electric shock or device fault.
Indicates a potentially hazardous situation which, if not avoided appropriately, may result in
minor or moderate injury and/or damage to the product or the equipment to which the
product is connected, to software resources such as data, or to other properties.
Cuts, Damage
Before moving the product, be sure to turn off all the power supplies and unplug t
he
cables. Watch your steps when carrying the product. Do not use the product at
an
unstable location such as a place exposed to strong vibration or a sloping surface. Doin
g
so may let the product fall, resulting in an injury or fault.
Damage
Neither put anything on nor apply shock to the product. Once the product has been
powered, do not carry it. Doing either may cause a fault due to a load or shock.
Damage
Since the product contains many electronic components, keep it away from direct sunligh
t
high temperature, and high humidity to prevent condensation. Do not use or store the
product where it is exposed to much dust or a strong magnetic or electric field for an
extended period of time.
An adverse operating or storage environment can cause a fault.
Damage
Use the product within the ranges of its general specifications.
Operating it outside the range of any general specification may cause a fault.
Damage
To prevent electrostatic breakdown, do not let your finger or an object touch any metal pa
rt
of the connector. Before handling the product, touch a metal object (such as a door knob) t
o
discharge static electricity from your body.
Damage
Before turning the power on, be sure to finish making all the required connections. To set
up and use the product, follow the instructions given in this document.
Using the product incorrectly or inappropriately may cause a fault.
Damage
Before plugging or unplugging any cable for this product, be sure to turn the power supply
off. When unplugging the cable, remove it while holding the connector with
out pulling the
cable itself. Pulling the cable itself or bending it may expose or disconnect the cable cor
e,
resulting in a fault.
Damage
Re-transporting the product may damage it to cause a fault. Keep the packaging material
s
used for shipment of the product and use them when re-transporting it.
WARNING
CAUTION

BGM Adaptor MB2146-08-E Operation Manual V1.1
PREFACE
iii
© 2008 FUJITSU MICROELECTRONICS LIMITED
The contents of this document are subject to change without notice.
Customers are advised to consult with FUJITSU MICROELECTRONICS LIMITED sales representatives
before ordering.
The information, such as descriptions of function and application circuit examples, in this document are
presented solely for the purpose of reference to show examples of operations and uses of FUJITSU
MICROELECTRONICS LIMITED semiconductor device; FUJITSU MICROELECTRONICS LIMITED does
not warrant proper operation of the device with respect to use based on such information. When you
develop equipment incorporating the device based on such information, you must assume any
responsibility arising out of such use of the information. FUJITSU MICROELECTRONICS LIMITED
assumes no liability for any damages whatsoever arising out of the use of the information.
Any information in this document, including descriptions of function and schematic diagrams, shall not be
construed as license of the use or exercise of any intellectual property right, such as patent right or
copyright, or any other right of FUJITSU MICROELECTRONICS LIMITED or any third party or does
FUJITSU MICROELECTRONICS LIMITED warrant non-infringement of any third-party’s intellectual
property right or other right by using such information. FUJITSU MICROELECTRONICS LIMITED
assumes no liability for any infringement of the intellectual property rights or other rights of third parties
which would result from the use of information contained herein.
The products described in this document are designed, developed and manufactured as contemplated for
general use, including without limitation, ordinary industrial use, general office use, personal use, and
household use, but are not designed, developed and manufactured as contemplated (1) for use
accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious
effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss
(i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport
control, medical life support system, missile launch control in weapon system), or (2) for use requiring
extremely high reliability (i.e., submersible repeater and artificial satellite).
Please note that FUJITSU MICROELECTRONICS LIMITED will not be liable against you and/or any third
party for any claims or damages arising in connection with above-mentioned uses of the products.
Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or
loss from such failures by incorporating safety design measures into your facility and equipment such as
redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions.
If any products described in this document represent goods or technologies subject to certain restrictions
on export under the Foreign Exchange and Foreign Trade Law of Japan, the prior authorization by
Japanese government will be required for export of those products from Japan.

BGM Adaptor MB2146-08-E Operation Manual V1.1
Contents
iv
Contents
PREFACE .............................................................................................................................. i
■For your safety ....................................................................................................................... i
■Related manuals ..................................................................................................................... i
■European RoHS compliance .................................................................................................. i
■Caution of the products described in this document............................................................. ii
Contents.............................................................................................................................. iv
1 Checking the Delivered Product .................................................................................. 1
2 Optional Parts................................................................................................................ 2
3 Appearance and Part Names........................................................................................ 3
4 System Configuration ................................................................................................... 4
4.1. Using the adapter as an emulator system..................................................................................4
5 Connections .................................................................................................................. 5
5.1. Connection to the host computer ..............................................................................................5
5.2. Connection to the user system ..................................................................................................5
6 Specifications................................................................................................................ 6
6.1. General specifications...............................................................................................................6
6.2. USB line specifications.............................................................................................................6
6.3. Debug mode entry specifications..............................................................................................7
6.4. Adapter interface specifications................................................................................................8

BGM Adaptor MB2146-08-E Operation Manual V1.1
Chapter 1 Checking the Delivered Product
MCU-UM-500001-E-11 – Page 1
1 Checking the Delivered Product
Before using the product, make sure that the package contains the following items:
BGM adapter*: 1
USB cable (1.0m): 1
CD-ROM (English version – Contain this document): 1
*: Referred to as the adapter.

BGM Adaptor MB2146-08-E Operation Manual V1.1
Chapter 2 Optional Parts
MCU-UM-500001-E-11 – Page 2
2 Optional Parts
A variety of optional parts are available for this adapter that may be purchased separately as needed.
Consult a Fujitsu sales or support representative for details.

BGM Adaptor MB2146-08-E Operation Manual V1.1
Chapter 3 Appearance and Part Names
MCU-UM-500001-E-11 – Page 3
3 Appearance and Part Names
Figure 3.1 and 3.2 show the adapter appearance, major dimensions and part names.
Figure 3.1 Adapter appearance (top view)
Figure 3.2 Adapter appearance (front view)
IDC10 cable
US
B
con
n
ect
o
r
Power LED
User interface connector
127mm
125mm
USB connector
55.7mm
30mm

BGM Adaptor MB2146-08-E Operation Manual V1.1
Chapter 4 System Configuration
MCU-UM-500001-E-11 – Page 4
4 System Configuration
4.1. Using the adapter as an emulator system
Connect the adapter between the host computer and the user system so that the adapter can serve
as an emulator under control of the host computer. For using emulator debugger software on the
host computer, refer to the "SOFTUNE Workbench OPERATION MANUAL".
Figure 4.1.1 shows the system configuration when the adapter is used as an emulator system.
*1: USB cable
*2: IDC10 cable (flat cable of the adapter)
Figure 4.1.1 System configuration (emulator system)
User
interface
connector
Adaptor
Adaptor
interface
connector
MCU
*
2
User system
Host
computer
*
1

BGM Adaptor MB2146-08-E Operation Manual V1.1
Chapter 5 Connections
MCU-UM-500001-E-11 – Page 5
5 Connections
5.1. Connection to the host computer
Connect the adapter to the host computer using the USB cable. Figure 5.1.1 shows how to connect
the USB cable.
Figure 5.1.1 Connecting the USB cable
5.2. Connection to the user system
Connect the adapter to the user system.
Plug the user interface connector of the adapter into the adapter interface connector on the user
system.
When connecting the user interface connector, align the index marks (pin 1) on each of the
connectors.
For the specifications of the adapter interface connector, see “ ■ Adapter interface specifications” in
Section 6 “Specifications”.
Figure 5.2.1 shows how to connect the adapter to the user system.
Figure 5.2.1 Connecting to the user system
Connection to the USB
connector of the adaptor Adaptor
Adaptor interface connector to the user system
User interface
connector
Index mark (pin 1)
User system
Adaptor

BGM Adaptor MB2146-08-E Operation Manual V1.1
Chapter 6 Specifications
MCU-UM-500001-E-11 – Page 6
6 Specifications
6.1. General specifications
Table 1 lists the general specifications of the adapter.
Table 1 General specifications
Item Specification
Name F2MC family BGM adapter
Model number MB2146-08-E
Adapter power input
Max: 50mA (uses USB BUS power)
Power supply
specification User power input + 2.7V to + 5.5V *1, Max: 20mA*2
POWER LED indication
[Green
]: On when only adapter power is supplied
(with the
USB cable connected).
[Red]: On when only user power is supplied.
[Orange]:
On when both adapter power and user power are
supplied.
User interface connector *3
AMP
standard IDC10 compliant key type (with center key)
Operation temperature/humidity
+5
℃ to +35 ℃ /20% to 80% (no condensation)
Storage temperature/humidity
0
℃ to +70 ℃ /20% to 80% (no condensation)
Adapter
case: 55.7mm(W)X127mm(D)X30mm
(H)(excluding
protrusions)
Dimensions
IDC10 cable
length: 125
mm (excluding user interface
connector)
Weight 169g (Including USB Cable).
*1: The maximum and minimum voltage depends on the MCU used. For details, contact the
Fujitsu sales or support representative.
*2: Does not include the power consumption of the MCU.
*3: The part number of the connector is: 0-281271-1 (Tyco Electronics Corporation)
6.2. USB line specifications
Table 2 lists the USB line specifications of the adapter.
Table 2 USB line specifications
Item Description
Conforming standard USB1.0
Communication method Full speed bulk transfer
Data transfer rate 12Mbps
Connector shape Series B
Power supply BUS Powered

BGM Adaptor MB2146-08-E Operation Manual V1.1
Chapter 6 Specifications
MCU-UM-500001-E-11 – Page 7
6.3. Debug mode entry specifications
The following timing will enable MB95200 MCU enter Debug mode.
Figure 6.3.1 Adapter interface connector pin configuration

BGM Adaptor MB2146-08-E Operation Manual V1.1
Chapter 6 Specifications
MCU-UM-500001-E-11 – Page 8
6.4. Adapter interface specifications
The pin outs of the adapter interface connectors mounted on the user system are shown in Tables 3.
The recommended connectors are listed in Table 4, and the pin configuration is shown in Figure
6.4.1.
When the adapter interface connector is mounted on the user system, connect the MCU to the
adapter interface connector according to the following specifications.
Table 3 Adapter interface connector pin out (emulator system)
Connecto
r
pin number
Input / output
Target
MCU
connection
pin name
Function Remarks
1 BGMA *1←MCU *2 UVCC User power supply input Connected to the MCU Vcc pin.
2 - GND
Vss pin
Connected to the MCU Vss pin.
3 BGMA→MCU RSTIN Tool reset output
BDSU, Initialization of users
logic, 10V output
4 BGMA←MCU RSTOUT
User System reset
output
Connect
ed to user System reset
circuit
5 - RSV - -
6 - RSV - -
7 - RSV - -
8 BGMA←MCU
BGMA→MCU DBG Communication line 1 line UART
9 - RSV - -
10 - RSV - -
*1: “BGMA” represents the BGM adapter.
*2: “MCU” represents the User system MCU.
Note: The pin assignment of MB2146-08-E is not compatible with MB2146-09. Do not interchange
these two BGM adaptors with their respective target MCU. This may cause malfunction of Debug
system.

BGM Adaptor MB2146-08-E Operation Manual V1.1
Chapter 6 Specifications
MCU-UM-500001-E-11 – Page 9
Table 4 Recommended adapter interface connectors
Part number Specifications Manufacturer
0-281271-1 Straight Housing provided, post support
Tyco Electronics
Corporation
Figure 6.4.1 Adapter interface connector pin configuration
*: The pin names of the user interface connector show the pin names to connect to the target
MCU on the emulator system.
Figure 6.4.2 User interface circuitry
Index mark
9pin
10pin
1pin
2pin
TOP VIEW

BGM Adaptor MB2146-08-E Operation Manual V1.1
Chapter 6 Specifications
MCU-UM-500001-E-11 – Page 10
Table 5 DC specifications of the user interface
Connector
pin number
Circuit type IOH*1
(mA)
IOL*2
(mA)
ILI*3
( A) 
Resistor connection Remarks
3 Open drain output - 64.0 *4 1 *4 Connected to UVCC
by 47k 
Connected to GND
via analog switch*5
4 CMOS input - - ± 5 *4
8 CMOS input
Open drain output
- 4.0 *4 ± 5 *4
See Figure 6.4.2
*1: The “H” level output current.
*2: The “L” level output current.
*3: The input leakage current.
*4: Does not include the current through the pull-up resistance.
*5: The voltage monitoring IC controls the on/off connection to the GND via bus switch.

MCU-UM-500001-E-11
FUJITSU MICROELECTRONICS LIMITED • SUPPORT SYSTEM
F2MC Family
BGM Adaptor
MB2146-08-E
OPERATION MANUAL
April 2008 the second edition
Published FUJITSU MICROELECTRONICS LIMITED
Edited Business Promotion Dept.