1. Non-Interlaced, Multisync PC Monitor (Owner Supplied)
Virtually any size including, 15", 17", 20", 21" and 28"
CRTs, as well as Flat Panel LCDs
(VGA640 x 480 or higher)
2. Display Modes Single (LF or HF), Dual, Triple Zoom, Bottom-lock
Expansion, Mix and A-scope
3. Basic Ranges Any ranges customized between 5-2000 m
Foot, Fathom Passi/Braza may be selected
Marker Zoom/Bottom-lock Expansion Ranges:
5-200 m
Range Phasing: Up to 4000 m (Max depth: 2000 m)
Zoom Ranges: 5-200 m (preset on menu)
4. Pulselength and Pulse Repetition Rate
0.2-5.0 ms, 20-3000 pulses/min
5. Picture Advance 0, 1/16, 1/8, 1/4, 1/2, 1 or 2 lines/tx
6. Data Interface (NMEA0183 Ver. 1.5 or 2.0; Any talker)
Inputs: GGA, GLC, GLL, GTD, MTW, RMA, RMC, VTG
Outputs: SDDBS, SDDBT, SDDPT, SDTLL, YCMTW*
*Optional sensor required
Depth data of fishing gear and water temperature using a
FURUNO Net Sounder.
7. Alarms Audio-visual alarms for water depth, fish echoes
and water temperature*
*Optional sensor required
8. Other Features Automatic bottom tracking, Interference rejecter,
Threshold, Water temperature graph*, Picture
memory/recall
*Optional sensor required
9. TX Output Power
1, 2 or 3 kW RMS (depending on transducer types)
10. Operating Frequencies
The synthesized transceiver works with two frequencies
from 10 to 200 kHz. Specify transducer type when
ordering for 15/28/38/50/88/107 or 200 kHz.
POWER SUPPLY
12-32 VDC, 120 W max. 115/230 VAC with optional rectifier
ENVIRONMENTAL CONDITIONS (IEC 60945 TESTING)
Display Unit: -15˚C to +55˚C
Water Resistance: IEC IPX5
EQUIPMENT LIST
Standard
1. Control Unit CV-1201 1 Unit
2. Processor Unit CV-1203 1 Unit
3. Installation materials and standard spare parts 1 Set
4. Interface box IF-8000 1 Unit
Optional
1. Non-Interlaced, Multi-sync PC Monitor (SXGA1280 x 1024)
2. Temperature sensor
T-02MSB (thru-hull bronze), T-02MTB (transom bronze),
T-03MSB (thru-hull bronze detachable)
3. Rectifier RU-1746B-2
4. EX-IF Board with connector
5. Transducer switch box EX-7
6. Data Recorder MT-12 (EX-7 required)
7. Echo sounder interface VI-1100A
8. External Transceiver ETR-5D/10D
9. Transducer (Specify the frequency and type of transducer)
1 kW: 15F-4S (15 kHz), 28F-8 (28 kHz), 50B-6/6B (50 kHz)
50B/9/9B (50 kHz), 50F-8G (50 kHz), 88B-8 (88 kHz),
200B-5S (200 kHz)
2 kW: 15F-10 (15 kHz), 28F-18 (28 kHz), 50B-12 (50 kHz),
88B-10 (88 kHz), 200B-8/8 (200 kHz), 200B-8N (200 kHz)
3 kW: 15F-10 x 2 (15 kHz), 28F-24H (28 kHz), 50F-24H (50 kHz),
88F-126H (88 kHz), 100B-10R (107 kHz), 200B-12H (200 kHz)
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
SPECIFICATIONS OF FCV-1200BB
PROCESSOR UNIT
INTERCONNECTION DIAGRAM
FLEXIBLE SCREEN LAYOUTS
The screen presents a
choice of single, double or
triple pictures on a horizon-
tally split screen or vertically
split screen. Frequently used
picture layouts can be preset
as one of the display modes.
In the dual-frequency mode,the split range feature is available
- echograms in different depth segments by high and low fre-
quencies are visible side by side.
