GE LOGIQ 400 User manual

Revision 1
2227892
Technical
Publications
GEMedicalSystems
LOGIQ 400/500
Unpacking Instructions
Copyright© 1999, 2000 by General Electric Company
Operating Documentation
g

GE Medical Systems: Telex: 3797371
P.O. Box 414, Milwaukee, Wisconsin 53201 U.S.A.
(Asia, Pacific, Latin America, North America)
GE Medical Systems—Europe: Telex: 695277
283 rue de la Miniére BP34
78533 BUC Cedex
GE Medical Systems
g

A
GE MEDICAL SYSTEMS LOGIQ 400/500 UNPACKING INSTRUCTIONS
REV 1 2227892
REVISIONHISTORY
0October 21, 1999 Initial Release
1June 13, 2000 Added LOGIQ 500 to procedure
REV DATE REASON FOR CHANGE
LIST OF EFFECTIVE PAGES
PAGE REVISION PAGE REVISION PAGE REVISION
NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER
Title Page 1
A and B 1
1 - 10 1
Please verify that you are using the latest revision of this document. Information pertain-
ing to this document is maintained on GPC (Global Product Configuration). If you do not
know how to use GPC, contact your Manager or the National Support Center.

B
GE MEDICAL SYSTEMS LOGIQ 400/500 UNPACKING INSTRUCTIONS
REV 1 2227892
This page intentionally left blank

-1-
GE MEDICAL SYSTEMS LOGIQ 400/500 UNPACKING INSTRUCTIONS
REV 1 2227892
Uncrating
LOGIQ 400/500 UNPACKING INSTRUCTIONS
1. Inspect the crate for any damage. Check shock indicator and tip
watch (see Image 1).
Image 1
Report any damage or sign of tipping to dispatcher.
2. Cut the two metal strapping bands (see Image 1).
3. Remove the top of the box.
4. On one corner of the box, you will find four quick disconnects.
NOTE: On cartons that DO NOT have quick disconnects, lift the
carton up completely above the system and remove.
Proceed to step 10.
5. On the inside of the quick disconnects is a plastic handle.
Turn the handle 1/4 turn counterclockwise (to the left).
Cut Metal Bands

-2-
GE MEDICAL SYSTEMS LOGIQ 400/500 UNPACKING INSTRUCTIONS
REV 1 2227892
Uncrating (cont'd)
Image 2
7. Repeat this procedure for all quick disconnects.
8. Pull the corner of the box, where you removed the quick
disconnects, towards you.
9. Remove the cardboard crate.
10. Remove the plastic wrap from around the console and monitor
(see Image 3).
Image 3
6. Pullthehandleofthequickdisconnectssothattheinsertisremoved
(see Image 2).
Quick
Disconnects

-3-
GE MEDICAL SYSTEMS LOGIQ 400/500 UNPACKING INSTRUCTIONS
REV 1 2227892
Uncrating (cont'd)
11. Cut the tape at the corners of the top of the shipping crate.
12. With the styrofoam wedges closest to the palette, place the top of
the crate like a ramp in front of the LOGIQ 400.
The ramp for the LOGIQ 500 is packed behind the unit. Remove
the ramp and place it in front of the LOGIQ 500.
Image 4

-4-
GE MEDICAL SYSTEMS LOGIQ 400/500 UNPACKING INSTRUCTIONS
REV 1 2227892
Uncrating (cont'd)
Probe Hanger Arm
Image 5
Accessories
1. Below the keyboard you will find an accessory package.
(see Image 6).
2. Remove the accessory package and Service Manual.
3. Open the accessory package and remove the contents.
Image 6
13. Unlock the LOGIQ 400 front wheels. Carefully roll the system off of
the pallette, down the ramp and onto the floor (see Image 5).

-5-
GE MEDICAL SYSTEMS LOGIQ 400/500 UNPACKING INSTRUCTIONS
REV 1 2227892
Accessories (cont'd) 4. Find the probe hanger arm (see Image 7).
WellCover
Image 8
5. Plug the probe hanger arm into the console (see Image 8).
Image 7
Probe
Hanger
Arm
Probe
Hanger
Arm

-6-
GE MEDICAL SYSTEMS LOGIQ 400/500 UNPACKING INSTRUCTIONS
REV 1 2227892
Accessories (cont'd)
7. Plug probe into 2nd probe port (Port #1 is normally INACTIVE in
the LOGIQ 400.) If there is a second probe, plug it into the 3rd
probe port.
NOTE: Use caution when handling probes. They are fragile and
can be easily damaged.
8. Ensure that the locking handle is pointed to the right
(see Image 10).
Image 10
6. Unpack a probe (see Image 9).
NOTE: The probe box(es) should remain with the customer and
be in good condition.
Image 9
Locking Handle
Points Right

-7-
GE MEDICAL SYSTEMS LOGIQ 400/500 UNPACKING INSTRUCTIONS
REV 1 2227892
9. Lock the probe in the probe port by turning the locking handle 1/4
turn clockwise (see Image 11).
Accessories (cont'd)
10. See Image 12 and route the cable as shown.
Gel Bottle
AccessoriesPackage
Image 11
Image 12
Locking Handle
Points Down
(Locked)
Route Cable
Route Cable

-8-
GE MEDICAL SYSTEMS LOGIQ 400/500 UNPACKING INSTRUCTIONS
REV 1 2227892
Accessories (cont'd)
Image 13
13. Unwrap the Service and Operator/Users Manuals.
14. Give the Service and User manuals to the customer and place the
software package with the system.
Service ManualSoftware Disk
Plug the system into an approved electrical outlet. Turn on the system and
verify the image on the monitor looks similar to Image 14 below.
Move to Customer
Location Afterunpacking,any initialsetupis complete. Move thesystem,probes and
all accessories to the desired customer location in the facility.
System Verification
Image 14

-9-
GE MEDICAL SYSTEMS LOGIQ 400/500 UNPACKING INSTRUCTIONS
REV 1 2227892
Gel Bottle
Site Clean-up 1. Remove all packing material skids, foam and paper from the
delivery site.
2. Ensure that the system is clean and free of smudges, smears and
handprints.
3. DO NOT take the probe box(es). These MUST remain with the
customer.
Confirmation When the installation is complete, please call Tech Trans at1-800-851-9929
to confirm delivery and installation of the ultrasound system.
NOTE: THIS CALL SHOULD BE PLACED BEFORE LEAVING THE
CUSTOMER SITE WHENEVER POSSIBLE.

-10-
GE MEDICAL SYSTEMS LOGIQ 400/500 UNPACKING INSTRUCTIONS
REV 1 2227892
This Page Intentionally Left Blank