GE Lullaby Warmer Manual

Lullaby™ Warmer
Maintenance and Service Manual -English
2042376-001
Rev G
GE Healthcare
Lullaby™ Warmer
Maintenance and Service manual

Disclaimer
© 2012 General Electric Company
All rights reserved. General Electric Company reserves the right to make changes in specifications and
features shown herein, or discontinue the product described at any time without notice or obligation.
Contact your GE Representative for the most current information. Lullaby is a trademark owned by
Datex-Ohmeda, Inc. GE and GE Monogram are trademarks of General Electric Company. All other
company and product names mentioned may be trademarks of the companies with which they are
associated.

(BG)
ПРЕДУПРЕЖДЕНИЕ
Това упътване за работа е налично само на английски език.
Ако доставчикът на услугата на клиента изиска друг език,
задължение на клиента е да осигури превод.
Не използвайте оборудването, преди да сте се консултирали и
разбрали упътването за работа.
Неспазването на това предупреждение може да доведе до
нараняване на доставчика на услугата, оператора или пациентa в
резултат на токов удар, механична или друга опасност.
(ZH-CN)
警告
本维修手册仅提供英文版本。
如果客户的维修服务人员需要非英文版本，则客户需自行提供翻译服
务。
未详细阅读和完全理解本维修手册之前，不得进行维修。
忽略本警告可能对维修服务人员、操作人员或患者造成电击、机械伤
害或其他形式的伤害。
(ZH-HK)
警告
本服務手冊僅提供英文版本。
倘若客戶的服務供應商需要英文以外之服務手冊，客戶有責任提供翻
譯服務。
除非已參閱本服務手冊及明白其內容，否則切勿嘗試維修設備。
不遵從本警告或會令服務供應商、網絡供應商或病人受到觸電、機械
性或其他的危險。
(ZH-TW)
警告
本維修手冊僅有英文版。
若客戶的維修廠商需要英文版以外的語言，應由客戶自行提供翻譯服
務。
請勿試圖維修本設備，除非 您已查閱並瞭解本維修手冊。
若未留意本警告，可能導致維修廠商、操作員或病患因觸電、機械或
其他危險而受傷。

(HR)
UPOZORENJE
Ovaj servisni priručnik dostupan je na engleskom jeziku.
Ako davatelj usluge klijenta treba neki drugi jezik, klijent je dužan
osigurati prijevod.
Ne pokušavajte servisirati opremu ako niste u potpunosti pročitali i
razumjeli ovaj servisni priručnik.
Zanemarite li ovo upozorenje, može doći do ozljede davatelja usluge,
operatera ili pacijenta uslijed strujnog udara, mehaničkih ili drugih rizika.
(CS)
VÝSTRAHA
Tento provozní návod existuje pouze v anglickém jazyce.
V případě, že externí služba zákazníkům potřebuje návod v jiném jazyce,
je zajištění překladu do odpovídajícího jazyka úkolem zákazníka.
Nesnažte se o údržbu tohoto zařízení, aniž byste si přečetli tento
provozní návod a pochopili jeho obsah.
V případě nedodržování této výstrahy může dojít k poranění pracovníka
prodejního servisu, obslužného personálu nebo pacientů vlivem
elektrického proudu, respektive vlivem mechanických či jiných rizik.
(DA)
ADVARSEL
Denne service manual findes kun på engelsk.
Hvis en kundes tekniker har brug for et andet sprog end engelsk, er det
kundens ansvar at sørge for oversættelse.
Forsøg ikke at servicere udstyret uden at læse og forstå denne
servicemanual.
Manglende overholdelse af denne advarsel kan medføre skade på grund
af elektrisk stød, mekanisk eller anden fare for teknikeren, operatøren
eller patienten.
(NL)
WAARSCHUWING
Deze onderhoudshandleiding is enkel in het Engels verkrijgbaar.
Als het onderhoudspersoneel een andere taal vereist, dan is de klant
verantwoordelijk voor de vertaling ervan.
Probeer de apparatuur niet te onderhouden alvorens deze
onderhoudshandleiding werd geraadpleegd en begrepen is.
Indien deze waarschuwing niet wordt opgevolgd, zou het
onderhoudspersoneel, de operator of een patiënt gewond kunnen raken
als gevolg van een elektrische schok, mechanische of andere gevaren.

(EN)
WARNING:
This service manual is available in English only.
If a customer’s service provider requires a language other than English,
it is the customer’s responsibility to provide translation services.
Do not attempt to service the equipment unless this service manual has
been consulted and is understood.
Failure to heed this warning may result in injury to the service provider,
operator, or patient from electric shock, mechanical hazards, or other
hazards.
(ET)
HOIATUS
See teenindusjuhend on saadaval ainult inglise keeles
Kui klienditeeninduse osutaja nõuab juhendit inglise keelest erinevas
keeles, vastutab klient tõlketeenuse osutamise eest.
Ärge üritage seadmeid teenindada enne eelnevalt käesoleva
teenindusjuhendiga tutvumist ja sellest aru saamist.
Käesoleva hoiatuse eiramine võib põhjustada teenuseosutaja,
operaatori või patsiendi vigastamist elektrilöögi, mehaanilise või muu
ohu tagajärjel.
(FI)
VAROITUS
Tämä huolto-ohje on saatavilla vain englanniksi.
Jos asiakkaan huoltohenkilöstö vaatii muuta kuin englanninkielistä
materiaalia, tarvittavan käännöksen hankkiminen on asiakkaan
vastuulla.
Älä yritä korjata laitteistoa ennen kuin olet varmasti lukenut ja
ymmärtänyt tämän huolto-ohjeen.
Mikäli tätä varoitusta ei noudateta, seurauksena voi olla
huoltohenkilöstön, laitteiston käyttäjän tai potilaan vahingoittuminen
sähköiskun, mekaanisen vian tai muun vaaratilanteen vuoksi.
(FR)
ATTENTION
Ce manuel d’installation et de maintenance est disponible uniquement en anglais.
Si le technicien d’un client a besoin de ce manuel dans une langue autre
que l’anglais, il incombe au client de le faire traduire.
Ne pas tenter d’intervenir sur les équipements tant que ce manuel
d’installation et de maintenance n’a pas été consulté et compris.

Le non-respect de cet avertissement peut entraîner chez le technicien,
l’opérateur ou le patient des blessures dues à des dangers électriques,
mécaniques ou autres.
(DE)
WARNUNG
Diese Serviceanleitung existiert nur in englischer Sprache.
Falls ein fremder Kundendienst eine andere Sprache benötigt, ist es
Aufgabe des Kunden für eine entsprechende Übersetzung zu sorgen.
Versuchen Sie nicht diese Anlage zu warten, ohne diese
Serviceanleitung gelesen und verstanden zu haben.
Wird diese Warnung nicht beachtet, so kann es zu Verletzungen des
Kundendiensttechnikers, des Bedieners oder des Patienten durch
Stromschläge, mechanische oder sonstige Gefahren kommen.
(EL)
ΠΡΟΕΙΔΟΠΟΙΗΣΗ
Το παρόν εγχειρίδιο σέρβις διατίθεται μόνο στα αγγλικά.
Εάν ο τεχνικός σέρβις ενός πελάτη απαιτεί το παρόν εγχειρίδιο σε
γλώσσα εκτός των αγγλικών, αποτελεί ευθύνη του πελάτη να παρέχει
τις υπηρεσίες μετάφρασης.
Μην επιχειρήσετε την εκτέλεση εργασιών σέρβις στον εξοπλισμό αν
δεν έχετε συμβουλευτεί και κατανοήσει το παρόν εγχειρίδιο σέρβις.
Αν δεν προσέξετε την προειδοποίηση αυτή, ενδέχεται να προκληθεί
τραυματισμός στον τεχνικό σέρβις, στο χειριστή ή στον ασθενή από
ηλεκτροπληξία, μηχανικούς ή άλλους κινδύνους.
(HU)
FIGYELMEZTETÉS
Ezen karbantartási kézikönyv kizárólag angol nyelven érhető el.
Ha a vevő szolgáltatója angoltól eltérő nyelvre tart igényt, akkor a vevő
felelőssége a fordítás elkészíttetése.
Ne próbálja elkezdeni használni a berendezést, amíg a karbantartási
kézikönyvben leírtakat nem értelmezték.
Ezen figyelmeztetés figyelmen kívül hagyása a szolgáltató, működtető
vagy a beteg áramütés, mechanikai vagy egyéb veszélyhelyzet miatti
sérülését eredményezheti.
AÐVÖRUN
Þessi þjónustuhandbók er aðeins fáanleg á ensku.
Ef að þjónustuveitandi viðskiptamanns þarfnast annas tungumáls en

(IS)
ensku, er það skylda viðskiptamanns að skaffa tungumálaþjónustu.
Reynið ekki að afgreiða tækið nema að þessi þjónustuhandbók hefur
verið skoðuð og skilin.
Brot á sinna þessari aðvörun getur leitt til meiðsla á þjónustuveitanda,
stjórnanda eða sjúklings frá raflosti, vélrænu eða öðrum áhættum.
(IT)
AVVERTENZA
Il presente manuale di manutenzione è disponibile soltanto in lingua inglese.
Se un addetto alla manutenzione richiede il manuale in una lingua
diversa, il cliente è tenuto a provvedere direttamente alla traduzione.
Procedere alla manutenzione dell’apparecchiatura solo dopo aver
consultato il presente manuale ed averne compreso il contenuto.
Il mancato rispetto della presente avvertenza potrebbe causare lesioni
all’addetto alla manutenzione, all’operatore o ai pazienti provocate da
scosse elettriche, urti meccanici o altri rischi.
(JA)
このサービスマニュアルには英語版しかありません。
サービスを担当される業者が英語以外の言語を要求される場合、翻
訳作業はその業者の責任で行うものとさせていただªます。
このサービスマニュアルを熟読し理解せずに、装置のサービスを行
わないでください。
この警告に従わない場合、サービスを担当される方、操作員あるい
は患者
さんが、感電や機械的又はその他の危険により負傷する可能性があ
ります。
(KO)
경고
본¼비스 매뉴얼은 영어로만 이용하실 수있습니다.
고객의 ¼비스 제공자가 영어 이외의 언어를 요구할 경우, 번역 ¼-
비스를 제공하는 것은 고객의 책임입니다.
본¼비스 매뉴얼을 참조하여 숙지하지 않은 이상 해당 장비를

수리하려고 시도하지 마십시오.
본경고 사항에 유의하지 않으면 전기 쇼크, 기계적 위험, 또는 기타
위험으로 인해 ¼비스 제공자, 사용자 또는 환자에게 부상을 입힐 수
있습니다.
(LV)
BRĪDINĀJUMS
Šī apkopes rokasgrāmata ir pieejama tikai angļu valodā.
Ja klienta apkopes sniedzējam nepieciešama informācija citā valodā,
klienta pienākums ir nodrošināt tulkojumu.
Neveiciet aprīkojuma apkopi bez apkopes rokasgrāmatas izlasīšanas un
saprašanas.
Šī brīdinājuma neievērošanas rezultātā var rasties elektriskās strāvas
trieciena, mehānisku vai citu faktoru izraisītu traumu risks apkopes
sniedzējam, operatoram vai pacientam.
(LT)
ĮSPĖJIMAS
Šis eksploatavimo vadovas yra tik anglų kalba.
Jei kliento paslaugų tiekėjas reikalauja vadovo kita kalba – ne anglų,
suteikti vertimo paslaugas privalo klientas.
Nemėginkite atlikti įrangos techninės priežiūros, jei neperskaitėte ar
nesupratote šio eksploatavimo vadovo.
Jei nepaisysite šio įspėjimo, galimi paslaugų tiekėjo, operatoriaus ar
paciento sužalojimai dėl elektros šoko, mechaninių ar kitų pavojų.
(NO)
ADVARSEL
Denne servicehåndboken finnes bare på engelsk.
Hvis kundens serviceleverandør har bruk for et annet språk, er det
kundens ansvar å sørge for oversettelse.
Ikke forsøk å reparere utstyret uten at denne servicehåndboken er lest
og forstått.
Manglende hensyn til denne advarselen kan føre til at
serviceleverandøren, operatøren eller pasienten skades på grunn av
elektrisk støt, mekaniske eller andre farer.
(PL)
OSTRZEŻENIE
Niniejszy podręcznik serwisowy dostępny jest jedynie w języku angielskim.
Jeśli serwisant klienta wymaga języka innego niż angielski, zapewnienie

usługi tłumaczenia jest obowiązkiem klienta.
Nie próbować serwisować urządzenia bez zapoznania się z niniejszym
podręcznikiem serwisowym i zrozumienia go.
Niezastosowanie się do tego ostrzeżenia może doprowadzić do obrażeń
serwisanta, operatora lub pacjenta w wyniku porażenia prądem
elektrycznym, zagrożenia mechanicznego bądź innego.
(PT-BR)
AVISO
Este manual de assistência técnica encontra-se disponível unicamente em inglês.
Se outro serviço de assistência técnica solicitar a tradução deste
manual, caberá ao cliente fornecer os serviços de tradução.
Não tente reparar o equipamento sem ter consultado e compreendido
este manual de assistência técnica.
A não observância deste aviso pode ocasionar ferimentos no técnico,
operador ou paciente decorrentes de choques elétricos, mecânicos ou
outros.
(PT-PT)
ATENÇÃO
Este manual de assistência técnica só se encontra disponível em inglês.
Se qualquer outro serviço de assistência técnica solicitar este manual
noutro idioma, é da responsabilidade do cliente fornecer os serviços de
tradução.
Não tente reparar o equipamento sem ter consultado e compreendido
este manual de assistência técnica.
O não cumprimento deste aviso pode colocar em perigo a segurança do
técnico, do operador ou do paciente devido a choques eléctricos,
mecânicos ou outros.
(RO)
ATENŢIE
Acest manual de service este disponibil doar în limba engleză.
Dacă un furnizor de servicii pentru clienţi necesită o altă limbă decât
cea engleză, este de datoria clientului să furnizeze o traducere.
Nu încercaţi să reparaţi echipamentul decât ulterior consultării şi
înţelegerii acestui manual de service.
Ignorarea acestui avertisment ar putea duce la rănirea depanatorului,
operatorului sau pacientului în urma pericolelor de electrocutare,
mecanice sau de altă natură.

(RU)
ОСТОРОЖНО!
Данное руководство по техническому обслуживанию представлено только на
английском языке.
Если сервисному персоналу клиента необходимо руководство не на
английском, а на каком-то другом языке, клиенту следует
самостоятельно обеспечить перевод.
Перед техническим обслуживанием оборудования обязательно
обратитесь к данному руководству и поймите изложенные в нем
сведения.
Несоблюдение требований данного предупреждения может
привести к тому, что специалист по техобслуживанию, оператор или
пациент получит удар электрическим током, механическую травму
или другое повреждение.
(SR)
UPOZORENJE
Ovo servisno uputstvo je dostupno samo na engleskom jeziku.
Ako klijentov serviser zahteva neki drugi jezik, klijent je dužan da
obezbedi prevodilačke usluge.
Ne pokušavajte da opravite uređaj ako niste pročitali i razumeli ovo
servisno uputstvo.
Zanemarivanje ovog upozorenja može dovesti do povređivanja
servisera, rukovaoca ili pacijenta usled strujnog udara ili mehaničkih i
drugih opasnosti.
(SK)
UPOZORNENIE
Tento návod na obsluhu je k dispozícii len v angličtine.
Ak zákazníkov poskytovateľ služieb vyžaduje iný jazyk ako angličtinu,
poskytnutie prekladateľských služieb je zodpovednosťou zákazníka.
Nepokúšajte sa o obsluhu zariadenia, kým si neprečítate návod na
obluhu a neporozumiete mu.
Zanedbanie tohto upozornenia môže spôsobiť zranenie poskytovateľa
služieb, obsluhujúcej osoby alebo pacienta elektrickým prúdom,
mechanické alebo iné ohrozenie.
(ES)
ATENCION
Este manual de servicio sólo existe en inglés.
Si el encargado de mantenimiento de un cliente necesita un idioma que
no sea el inglés, el cliente deberá encargarse de la traducción del

manual.
No se deberá dar servicio técnico al equipo, sin haber consultado y
comprendido este manual de servicio.
La no observancia del presente aviso puede dar lugar a que el
proveedor de servicios, el operador o el paciente sufran lesiones
provocadas por causas eléctricas, mecánicas o de otra naturaleza.
(SV)
VARNING
Den här servicehandboken finns bara tillgänglig på engelska.
Om en kunds servicetekniker har behov av ett annat språk än engelska,
ansvarar kunden för att tillhandahålla översättningstjänster.
Försök inte utföra service på utrustningen om du inte har läst och
förstår den här servicehandboken.
Om du inte tar hänsyn till den här varningen kan det resultera i skador
på serviceteknikern, operatören eller patienten till följd av elektriska
stötar, mekaniska faror eller andra faror.
(SL)
OPOZORILO
Ta servisni priročnik je na voljo samo v angleškem jeziku.·
Če ponudnik storitve stranke potrebuje priročnik v drugem jeziku, mora
stranka zagotoviti prevod.·
Ne poskušajte servisirati opreme, če tega priročnika niste v celoti
prebrali in razumeli.·
Če tega opozorila ne upoštevate, se lahko zaradi električnega udara,
mehanskih ali drugih nevarnosti poškoduje ponudnik storitev, operater
ali bolnik.
(TR)
DİKKAT
Bu servis kılavuzunun sadece ingilizcesi mevcuttur.
Eğer müşteri teknisyeni bu kılavuzu ingilizce dışında bir başka lisandan
talep ederse, bunu tercüme ettirmek müşteriye düşer.
Servis kılavuzunu okuyup anlamadan ekipmanlara müdahale etmeyiniz.
Bu uyarıya uyulmaması, elektrik, mekanik veya diğer tehlikelerden
dolayı teknisyen, operatör veya hastanın yaralanmasına yol açabilir.

This page is left blank intentionally.

Lullaby TM Warmer 2042376-001 Rev G ©2012 General Electric Company. All rights reserved. xiii
Table of Contents
IMPORTANT SAFETY INFORMATION ------------------------------------------------------- XXI
WARNINGS, CAUTIONS AND NOTES-----------------------------------------------------------------XXI
SYMBOLS-------------------------------------------------------------------------------------XXIII
ABOUT THIS MANUAL ----------------------------------------------------------------------XXVI
SCOPE AND INTENDED USERS --------------------------------------------------------------------- XXVI
ORGANIZATION OF THIS MANUAL ----------------------------------------------------------------- XXVI
CHAPTER 1 INTRODUCTION ----------------------------------------------------------------1
1.1 INDICATIONS FOR USE (INTENDED USE) ---------------------------------------------------- 1
1.2 MECHANICAL CONTROLS AND CABLE CONNECTIONS ------------------------------------ 2
1.3 CONTROLS AND DISPLAYS ------------------------------------------------------------------- 4
1.4 CONTROL MODES AND INDICATION -------------------------------------------------------- 6
1.5 DISPLAYS -------------------------------------------------------------------------------------- 8
1.6 SWITCHES AND KEYS------------------------------------------------------------------------- 9
1.7 ALARMS AND INDICATION ------------------------------------------------------------------11
CHAPTER 2 SYSTEM SETUP AND CHECKOUT PROCEDURES -------------------------- 16
2.1 MECHANICAL CHECKS-----------------------------------------------------------------------16
2.2 CONTROLLER CHECKS-----------------------------------------------------------------------20
2.3 ACCESSORIES CHECK------------------------------------------------------------------------21
CHAPTER 3 MAINTENANCE AND CLEANING-------------------------------------------- 22
3.1 REPAIR POLICY -------------------------------------------------------------------------------22
3.2 REQUIRED TOOLS AND PERSONNEL PROTECTION EQUIPMENT -------------------------22
3.3 MAINTENANCE SCHEDULE------------------------------------------------------------------22
3.4 CLEANING INSTRUCTIONS ------------------------------------------------------------------23
3.5 CLEANING THE LULLABYTM WARMER-------------------------------------------------------25
3.6 CLEANING SOLUTIONS ----------------------------------------------------------------------27
3.7 CLEANING AND DISINFECTING INDIVIDUAL COMPONENTS------------------------------27
3.8 CLEANING OTHER COMPONENTS ----------------------------------------------------------28
CHAPTER 4 TROUBLESHOOTING --------------------------------------------------------- 29
CHAPTER 5 SYSTEM INSTALLATION PROCEDURE -------------------------------------- 36
5.1 REQUIRED TOOLS AND PERSONNEL PROTECTION EQUIPMENT (PPE) -------------------36
5.2 CONTENTS OF LULLABYTM WARMER PACKAGING -----------------------------------------36
5.3 UNPACKING THE SHIPPING BOX -----------------------------------------------------------38
5.4PILLAR TO LEG ASSEMBLY AND HEIGHT ADJUSTMENT-----------------------------------40
5.5 ASSEMBLY OF PILLAR AND BED ------------------------------------------------------------44
5.6 ASSEMBLING THE PILLAR AND THE HOOD ------------------------------------------------46

xiv 2042376-001 Rev G ©2012 General Electric Company. All rights reserved. LullabyTM Warmer
5.7 CONNECTING THE POWER CORD ----------------------------------------------------------49
5.8 MOUNTING THE ACCESSORIES -------------------------------------------------------------49
5.8.1 Mounting the IV pole --------------------------------------------------------------------50
5.8.2 Mounting the Monitor /Instrument Tray-----------------------------------------------51
5.8.3 Mounting the Utility Pole----------------------------------------------------------------51
5.8.4 Mounting the Cylinder Holder and the Cylinder --------------------------------------52
5.8.5 Mounting the Drawer Assembly--------------------------------------------------------53
5.8.6 Mounting the Chest Tube Drainage Hanger ------------------------------------------54
5.8.7 Mounting the Tubing Management Arm ----------------------------------------------54
5.8.8 Mounting the Utility Post (3.5”) ---------------------------------------------------------55
5.8.9 Mounting the Basket Assembly --------------------------------------------------------55
5.8.10 Mounting the Resuscitation Bag Clip --------------------------------------------------55
5.8.11 Mounting the Retaining Clip ------------------------------------------------------------56
5.8.12 Assembling the slotted Bedside Panel -------------------------------------------------56
5.9 CHECKOUT PROCEDURES-------------------------------------------------------------------56
5.10 REPACKING THE WARMER WITHOUT SKD FOR LOCAL TRANSPORT---------------------57
CHAPTER 6 SYSTEM DISMANTLING PROCEDURE--------------------------------------- 58
6.1 DISMANTLING THE ACCESSORIES ----------------------------------------------------------58
6.2 DISMANTLING THE BASE AND BED---------------------------------------------------------58
6.3 DISMANTLING THE HOOD ASSEMBLY------------------------------------------------------59
6.4 DISMANTLING THE PILLAR TO LEG ASSEMBLY --------------------------------------------60
CHAPTER 7 FIELD REPLACEABLE UNIT (FRU) REPLACEMENT PROCEDURES -------- 61
7.1 REPLACING THE PARTS OF THE LULLABYTM WARMER ------------------------------------61
7.1.1 Replacing the Hood Exterior (FRU Kit No: 2043936-001)-----------------------------61
7.1.2 Replacing the extrusions----------------------------------------------------------------62
7.1.3 Replacing the hood spacer, hood top plate and observation lamp plate ----------63
7.1.4 Replacing the Front Bracket ------------------------------------------------------------64
7.1.5 Replacing the Front and Rear Covers--------------------------------------------------65
7.1.6 Replacing the PCB Wire Assembly (PWA) (FRU Kit No. 2043951-001)---------------66
7.1.7 Replacing the Hood Support Plate and Rear Bracket (FRU KIT: 2043937-001)-----71
7.1.8 Replacing the Heater Assembly (FRU Kit No. 2043938-001) and Heater Cables (Part
of FRU Kit No. 2043950-001------------------------------------------------------------------------75
7.1.9 Replacing the Heater Assembly (FRU Kit No. 2062274-001 for 230V, 2056782-
001for 115V and 2061250-001 for 100V ) and Heater Cables (Part of FRU Kit No. 2062276-
001 for 230V, 2062276-001 for 115V and 2062276-001 for 100V) -----------------------------79
7.1.10 Replacing the Heater Tube (FRU Kit No. 2045962-001) ------------------------------82
7.1.11 Replacing the Observation Lamp (FRU Kit No. 2043939-001) -----------------------83
7.1.12 Replacing the LED Observation Lamp (FRU Kit No. 2062275-001) ------------------84
7.1.13 Replacing the UI Sticker (Overlay Display), Probe protective cover and switches
85
7.1.14 Replacing the Bed tilt Mechanism (FRU Kit No. 2043943-001) ----------------------86
7.1.15 Replacing the Bed Base Assembly (FRU Kit No. 2043949-001)----------------------91

Lullaby TM Warmer 2042376-001 Rev G ©2012 General Electric Company. All rights reserved. xv
7.1.16 Replacing the Front and Rear Covers of Height Skirt (Part of FRU Kit No. 2043952-
001) 91
7.1.17 Replacing the Castors (FRU Kit No. 2043945-001) and Leg Cap (Part of FRU Kit No.
2043952-001)----------------------------------------------------------------------------------------91
7.1.18 Replacing the Mattress (FRU Kit No. 2045963-001), Clear Plexiglas Plate (FRU Kit
No. 2043946-001) and X-ray Tray (FRU Kit No. 2043947-001)----------------------------------92
7.1.19 Replacing the Bedside Panel (FRU Kit No. 2043948-001) ----------------------------92
7.1.20 Replacing the Plate Power Inlet --------------------------------------------------------93
7.1.21 Replacing the Pillar Rear Cover (Part of FRU Kit No. 2043952-001) -----------------94
7.1.22 Replacing the Cable Harness FRU (FRU Kit No. 2043950-001) ----------------------94
7.1.23 Replacing the Cable Harness FRU (FRU Kit No. 2062276-001 for 230V, 115V and for
100V) --------------------------------------------------------------------------------------------95
7.1.24 Replacing the SMPS FRU (2062282-001)-----------------------------------------------96
CHAPTER 8 FRU PARTS -------------------------------------------------------------------- 97
CHAPTER 9 ILLUSTRATED PARTS--------------------------------------------------------106
9.1 ELECTRICAL WIRING DIAGRAM ----------------------------------------------------------- 106
9.2 BLOCK DIAGRAM--------------------------------------------------------------------------- 108
9.3 HOOD ASSEMBLY -------------------------------------------------------------------------- 110
9.4 BASE ASSEMBLY --------------------------------------------------------------------------- 115
9.5 BED ASSEMBLY----------------------------------------------------------------------------- 121
CHAPTER 10 PRODUCT LABELS -------------------------------------------------------122
APPENDIX A-----------------------------------------------------------------------------------126
TEMPERATURE CONVERSION CHART ------------------------------------------------------------- 126
APPENDIX B-----------------------------------------------------------------------------------127
SPECIFICATIONS------------------------------------------------------------------------------------- 127
Power Requirements------------------------------------------------------------------------------ 127
Standards ------------------------------------------------------------------------------------------ 127
Classification--------------------------------------------------------------------------------------- 127
Operating Environment--------------------------------------------------------------------------- 128
Storage and transport conditions --------------------------------------------------------------- 128
User Control Settings ----------------------------------------------------------------------------- 128
Performance--------------------------------------------------------------------------------------- 128
Mechanical Specifications------------------------------------------------------------------------ 129
Weight Bearing Capacity------------------------------------------------------------------------- 129
APPENDIX C-----------------------------------------------------------------------------------130
ELECTROMAGNETIC COMPATIBILITY ------------------------------------------------------------- 130
APPENDIX D - CONFORMING TO STANDARDS AND DIRECTIVES-----------------------134
APPENDIX E –ASSEMBLING AND DISMANTLING THE MSB DRAWER ASSEMBLY -----135

xvi 2042376-001 Rev G ©2012 General Electric Company. All rights reserved. LullabyTM Warmer
WARRANTY -----------------------------------------------------------------------------------138
GE SERVICE CENTERS------------------------------------------------------------------------139

Lullaby TM Warmer 2042376-001 Rev G ©2012 General Electric Company. All rights reserved. xvii
Table of Figures
Figure 1: LullabyTM Warmer------------------------------------------------------------------1
Figure 2: Front Oblique View-----------------------------------------------------------------2
Figure 3: Front View --------------------------------------------------------------------------2
Figure 4: Side View ---------------------------------------------------------------------------3
Figure 5: Back View---------------------------------------------------------------------------3
Figure 6: Controls and Displays -------------------------------------------------------------4
Figure 7: Temperature Settings and Modes------------------------------------------------4
Figure 8: Alarms and Indications------------------------------------------------------------5
Figure 9: APGAR-------------------------------------------------------------------------------5
Figure 10: Manual Mode -------------------------------------------------------------------6
Figure 11: Baby Mode ----------------------------------------------------------------------7
Figure 12: Displays -------------------------------------------------------------------------8
Figure 13: Keys------------------------------------------------------------------------------9
Figure 14: Power Standby/ON Switch -------------------------------------------------- 10
Figure 15: Power Standby/ON Switch -------------------------------------------------- 10
Figure 16: Alarms ------------------------------------------------------------------------- 11
Figure 17: Global Alarm ------------------------------------------------------------------ 12
Figure 18: Check Baby Alarm------------------------------------------------------------ 12
Figure 19: Probe Failure Indicator------------------------------------------------------- 13
Figure 20: System/ Heater Failure Alarms --------------------------------------------- 14
Figure 21: OVR ---------------------------------------------------------------------------- 15
Figure 22: UVR ---------------------------------------------------------------------------- 15
Figure 23: Heat OFF Indicator ----------------------------------------------------------- 15
Figure 24: Power Failure Indicator ------------------------------------------------------ 16
Figure 25: Disconnecting the Power Cord ---------------------------------------------- 17
Figure 26: Power Cord-------------------------------------------------------------------- 17
Figure 27: Inspecting the LullabyTM Warmer ------------------------------------------- 17
Figure 28: Locking/Releasing Rear Caster Brakes ------------------------------------ 18

xviii 2042376-001 Rev G ©2012 General Electric Company. All rights reserved. LullabyTM Warmer
Figure 29: Inspecting the Bedside Panel ----------------------------------------------- 18
Figure 30: Inspecting the Bedside Panel Lock------------------------------------------ 18
Figure 31: Tilting the bed towards the pillar-------------------------------------------- 19
Figure 32: Tilting the bed away from the pillar ---------------------------------------- 19
Figure 33: Bed Position Parallel to Floor ------------------------------------------------ 19
Figure 34: Hood Swivel –right----------------------------------------------------------- 19
Figure 35: Hood Swivel - left ------------------------------------------------------------- 19
Figure 36: Hood Lock--------------------------------------------------------------------- 19
Figure 37: Power Connection ------------------------------------------------------------ 20
Figure 38: Patient Probe Connection -------------------------------------------------- 20
Figure 39: Power Standby/ON Switch -------------------------------------------------- 20
Figure 40: Checking the Skin Probe ----------------------------------------------------- 21
Figure 41: Checking the Accessories---------------------------------------------------- 21
Figure 42: Opening the drawer --------------------------------------------------------- 21
Figure 43: The Hood ---------------------------------------------------------------------- 24
Figure 44: Removing the Plexiglas ------------------------------------------------------ 25
Figure 45: Removing the Mattress ------------------------------------------------------ 25
Figure 46: Removing the Plexiglas ------------------------------------------------------ 26
Figure 47: Cleaning With Ear Bud ------------------------------------------------------- 26
Figure 48: Removing the X-Ray Tray--------------------------------------------------- 26
Figure 49: Unpacking the LullabyTM Warmer shipper box ---------------------------- 38
Figure 50: Contents of LullabyTM Warmer shipper box-------------------------------- 39
Figure 51: Contents of LullabyTM Warmer shipper box-------------------------------- 39
Figure 52: Pillar Assembly---------------------------------------------------------------- 40
Figure 53: Leg Assembly ----------------------------------------------------------------- 41
Figure 54: The location of the screw holes on the leg assembly --------------------- 42
Figure 55: Pillar to Leg Assembly-------------------------------------------------------- 42
Figure 56: Bed Base Assembly ---------------------------------------------------------- 44
Figure 57: Bedside Panels Assembly---------------------------------------------------- 45
Figure 58: Mattress, Clear Plexiglas Plate, and X-tray Tray Assembly 1------------- 45

Lullaby TM Warmer 2042376-001 Rev G ©2012 General Electric Company. All rights reserved. xix
Figure 59: Pillar and Bed Assembly ----------------------------------------------------- 45
Figure 60: The Pillar and the Hood ------------------------------------------------------ 46
Figure 61: Printed Circuit Board Wire Assembly (PWA)-------------------------------- 48
Figure 62: Basic Warmer----------------------------------------------------------------- 49
Figure 63: Mounting the IV Pole --------------------------------------------------------- 50
Figure 64: The Monitor Tray Assembly ------------------------------------------------- 51
Figure 65: Assembling the Monitor/Instrument Tray --------------------------------- 51
Figure 66: Mounting the Utility Pole----------------------------------------------------- 51
Figure 67: Setting the Rear Castor Brakes---------------------------------------------- 52
Figure 68: Setting the Rear Castor Brakes---------------------------------------------- 52
Figure 69: The Cylinder Holder ---------------------------------------------------------- 52
Figure 70: Fastening with Velcro -------------------------------------------------------- 52
Figure 71: Mounting Bracket ------------------------------------------------------------ 52
Figure 72: Mounting Cylinder------------------------------------------------------------ 52
Figure 73: Mounting the Drawer Assembly -------------------------------------------- 53
Figure 74: Mounting the Chest Tube Drainage Hanger ------------------------------- 54
Figure 75: Mounting the Tubing Management Arm ----------------------------------- 54
Figure 76: Mounting the Utility Pole----------------------------------------------------- 55
Figure 77: Mounting the Basket Assembly --------------------------------------------- 55
Figure 78: Mounting the Resuscitation Bag Clip --------------------------------------- 55
Figure 79: Mounting the Resuscitation Bag Clip --------------------------------------- 56
Figure 80: Assembling the Slotted Bedside Panel ------------------------------------- 56
Figure 81: The heater hood with the components separated ------------------------ 61
Figure 82: Replacing the Rear Brackets and the Extrusions -------------------------- 62
Figure 83: Replacing Hood Spacer, Top Plate, Observation Lamp Plate and
Extrusions --------------------------------------------------------------------------------- 63
Figure 84: Bracket and Extrusions ------------------------------------------------------ 64
Figure 85: Replacing Rear Covers ------------------------------------------------------- 65
Figure 86: Replacing LullabyTM Warmer PWA------------------------------------------ 66
Figure 87: Replacing Heater Assembly ------------------------------------------------- 75

xx 2042376-001 Rev G ©2012 General Electric Company. All rights reserved. LullabyTM Warmer
Figure 88: Replacing Heater Assembly ------------------------------------------------- 79
Figure 89: Rear view of the Heater Assembly------------------------------------------ 82
Figure 90: Front view of the Heater Assembly ----------------------------------------- 82
Figure 91: Replacing the Observation Lamp ------------------------------------------- 83
Figure 92: Replacing the Observation Lamp ------------------------------------------- 84
Figure 93: Replacing UI Sticker ---------------------------------------------------------- 85
Figure 94: Replacing Castors and Leg Cap--------------------------------------------- 91
Figure 95: Lowering the bedside Panel ------------------------------------------------- 92
Figure 96: Removing the bedside panel ------------------------------------------------ 92
Figure 97: Replacing the bedside Panel ------------------------------------------------ 92
Figure 98: Replacing the Plate Power Inlet --------------------------------------------- 93
Figure 99: Replacing the Cable Harness------------------------------------------------ 94
Figure 100: Replacing the Cable Harness------------------------------------------------ 95
Figure 101: Replacing the SMPS ---------------------------------------------------------- 96
Figure 102: Electrical Wiring Diagram---------------------------------------------------107
Figure 103: Block Diagram ---------------------------------------------------------------109
Figure 104: Hood Assembly 1------------------------------------------------------------110
Figure 105: Hood Assembly 2------------------------------------------------------------110
Figure 106: Hood Assembly 3------------------------------------------------------------111
Figure 107: Hood Assembly 4------------------------------------------------------------111
Figure 108: Base Assembly 1 ------------------------------------------------------------115
Figure 109: Base Assembly 2 ------------------------------------------------------------116
Figure 110: Base Assembly 3 ------------------------------------------------------------117
Figure 111: Base Assembly 4 ------------------------------------------------------------118
Figure 112: Bed Assembly----------------------------------------------------------------121
Figure 113: Mounting the Drawer Assembly with Base Leg Cover -------------------135
Figure 114: Latch Operation in Slider----------------------------------------------------135
Figure 115: Mounting the Drawer Assembly with the Drawer Clamp----------------136
Figure 116: Mounting the Drawer Assembly with Base Leg Cover -------------------137