GE F60 UR Series User manual

832762A2.CDR
F60 Feeder Protection System
UR Series Instruction Manual
F60 Revision: 5.5x
Manual P/N: 1601-0093-S3 (GEK-113413B)
Copyright © 2008 GE Multilin
GE Multilin
215 Anderson Avenue, Markham, Ontario
Canada L6E 1B3
Tel: [phone] Fax: [phone]
Internet: http://www.GEmultilin.com
g
GE Industrial Systems
Title Page
I
ISO9001:2000
G
E
M
U
L
T
I
L
I
N
R
E
G
I
S
T
E
R
E
D
GE Multilin's Quality Management
System is registered to
ISO9001:2000
QMI # 005094
UL # A3775
*1601-0093-S3*
LISTED
52TL
IND.CONT. EQ.
E83849

g
GE Industrial Systems
ADDENDUM
This addendum contains information that relates to the F60 Feeder Protection System, version 5.5x. This addendum
lists a number of information items that appear in the instruction manual GEK-113413B (revision S3) but are not
included in the current F60 operations.
The following functions and items are not yet available with the current version of the F60 relay:
• Signal sources SRC 3 to SRC 6.
Version 4.0x and higher releases of the F60 relay includes new hardware (CPU and CT/VT modules).
• The new CPU modules are specified with the following order codes: 9E, 9G, 9H, 9J, 9K, 9L, 9M, 9N, 9P, 9R, and 9S.
• The new CT/VT modules are specified with the following order codes: 8F, 8G, 8H, 8J 8L, 8M, 8N, 8R.
The following table maps the relationship between the old CPU and CT/VT modules to the newer versions:
The new CT/VT modules can only be used with the new CPUs (9E, 9G, 9H, 9J, 9K, 9L, 9M, 9N, 9P, 9R, and 9S), and
the old CT/VT modules can only be used with the old CPU modules (9A, 9C, 9D). To prevent any hardware mis-
matches, the new CPU and CT/VT modules have blue labels and a warning sticker stating “Attn.: Ensure CPU and
DSP module label colors are the same!”. In the event that there is a mismatch between the CPU and CT/VT module,
the relay will not function and a DSP ERROR or HARDWARE MISMATCH error will be displayed.
All other input/output modules are compatible with the new hardware.
With respect to the firmware, firmware versions 4.0x and higher are only compatible with the new CPU and CT/VT mod-
ules. Previous versions of the firmware (3.4x and earlier) are only compatible with the older CPU and CT/VT modules.
MODULE OLD NEW DESCRIPTION
CPU 9A 9E RS485 and RS485 (Modbus RTU, DNP)
9C 9G RS485 and 10Base-F (Ethernet, Modbus TCP/IP, DNP)
9D 9H RS485 and redundant 10Base-F (Ethernet, Modbus TCP/IP, DNP)
--- 9J RS485 and multi-mode ST 100Base-FX
--- 9K RS485 and multi-mode ST redundant 100Base-FX
--- 9L RS485 and single mode SC 100Base-FX
--- 9M RS485 and single mode SC redundant 100Base-FX
--- 9N RS485 and 10/100Base-T
--- 9P RS485 and single mode ST 100Base-FX
--- 9R RS485 and single mode ST redundant 100Base-FX
--- 9S RS485 and six-port managed Ethernet switch
CT/VT 8A 8F Standard 4CT/4VT
8B 8G Sensitive ground 4CT/4VT
8C 8H Standard 8CT
8D 8J Sensitive ground 8CT/8VT
-- 8L Standard 4CT/4VT with enhanced diagnostics
-- 8M Sensitive ground 4CT/4VT with enhanced diagnostics
-- 8N Standard 8CT with enhanced diagnostics
-- 8R Sensitive ground 8CT/8VT with enhanced diagnostics
Addendum

GE Multilin F60 Feeder Protection System v
TABLE OF CONTENTS
1. GETTING STARTED 1.1 IMPORTANT PROCEDURES
1.1.1 CAUTIONS AND WARNINGS...........................................................................1-1
1.1.2 INSPECTION CHECKLIST................................................................................1-1
1.2 UR OVERVIEW
1.2.1 INTRODUCTION TO THE UR...........................................................................1-2
1.2.2 HARDWARE ARCHITECTURE.........................................................................1-3
1.2.3 SOFTWARE ARCHITECTURE..........................................................................1-4
1.2.4 IMPORTANT CONCEPTS.................................................................................1-4
1.3 ENERVISTA UR SETUP SOFTWARE
1.3.1 PC REQUIREMENTS........................................................................................1-5
1.3.2 INSTALLATION..................................................................................................1-5
1.3.3 CONFIGURING THE F60 FOR SOFTWARE ACCESS ....................................1-7
1.3.4 USING THE QUICK CONNECT FEATURE.......................................................1-9
1.3.5 CONNECTING TO THE F60 RELAY...............................................................1-15
1.4 UR HARDWARE
1.4.1 MOUNTING AND WIRING...............................................................................1-16
1.4.2 COMMUNICATIONS........................................................................................1-16
1.4.3 FACEPLATE DISPLAY....................................................................................1-16
1.5 USING THE RELAY
1.5.1 FACEPLATE KEYPAD.....................................................................................1-17
1.5.2 MENU NAVIGATION .......................................................................................1-17
1.5.3 MENU HIERARCHY ........................................................................................1-17
1.5.4 RELAY ACTIVATION.......................................................................................1-17
1.5.5 RELAY PASSWORDS.....................................................................................1-18
1.5.6 FLEXLOGIC™ CUSTOMIZATION...................................................................1-18
1.5.7 COMMISSIONING ........................................................................................... 1-19
2. PRODUCT DESCRIPTION 2.1 INTRODUCTION
2.1.1 OVERVIEW........................................................................................................2-1
2.1.2 ORDERING........................................................................................................2-2
2.1.3 REPLACEMENT MODULES .............................................................................2-4
2.2 SPECIFICATIONS
2.2.1 PROTECTION ELEMENTS ...............................................................................2-7
2.2.2 USER-PROGRAMMABLE ELEMENTS...........................................................2-10
2.2.3 MONITORING..................................................................................................2-11
2.2.4 METERING......................................................................................................2-11
2.2.5 INPUTS............................................................................................................2-12
2.2.6 POWER SUPPLY ............................................................................................2-13
2.2.7 OUTPUTS........................................................................................................2-13
2.2.8 COMMUNICATIONS........................................................................................2-15
2.2.9 INTER-RELAY COMMUNICATIONS...............................................................2-16
2.2.10 ENVIRONMENTAL..........................................................................................2-16
2.2.11 TYPE TESTS ...................................................................................................2-17
2.2.12 PRODUCTION TESTS ....................................................................................2-17
2.2.13 APPROVALS ...................................................................................................2-17
2.2.14 MAINTENANCE...............................................................................................2-17
3. HARDWARE 3.1 DESCRIPTION
3.1.1 PANEL CUTOUT ...............................................................................................3-1
3.1.2 MODULE WITHDRAWAL AND INSERTION.....................................................3-5
3.1.3 REAR TERMINAL LAYOUT...............................................................................3-7
3.2 WIRING
3.2.1 TYPICAL WIRING..............................................................................................3-9
3.2.2 DIELECTRIC STRENGTH...............................................................................3-11
3.2.3 CONTROL POWER.........................................................................................3-11
3.2.4 CT/VT MODULES............................................................................................3-12
3.2.5 CONTACT INPUTS/OUTPUTS .......................................................................3-14
3.2.6 TRANSDUCER INPUTS/OUTPUTS................................................................3-22
Table of Contents

vi F60 Feeder Protection System GE Multilin
TABLE OF CONTENTS
3.2.7 RS232 FACEPLATE PORT..............................................................................3-23
3.2.8 CPU COMMUNICATION PORTS.....................................................................3-23
3.2.9 IRIG-B...............................................................................................................3-27
3.3 DIRECT INPUT/OUTPUT COMMUNICATIONS
3.3.1 DESCRIPTION .................................................................................................3-28
3.3.2 FIBER: LED AND ELED TRANSMITTERS ......................................................3-30
3.3.3 FIBER-LASER TRANSMITTERS .....................................................................3-30
3.3.4 G.703 INTERFACE...........................................................................................3-31
3.3.5 RS422 INTERFACE .........................................................................................3-34
3.3.6 RS422 AND FIBER INTERFACE .....................................................................3-36
3.3.7 G.703 AND FIBER INTERFACE ......................................................................3-36
3.3.8 IEEE C37.94 INTERFACE................................................................................3-37
3.3.9 C37.94SM INTERFACE ...................................................................................3-39
3.4 MANAGED ETHERNET SWITCH MODULES
3.4.1 OVERVIEW ......................................................................................................3-41
3.4.2 MANAGED ETHERNET SWITCH MODULE HARDWARE..............................3-41
3.4.3 MANAGED SWITCH LED INDICATORS .........................................................3-42
3.4.4 CONFIGURING THE MANAGED ETHERNET SWITCH MODULE.................3-42
3.4.5 UPLOADING F60 SWITCH MODULE FIRMWARE .........................................3-44
3.4.6 ETHERNET SWITCH SELF-TEST ERRORS...................................................3-47
4. HUMAN INTERFACES 4.1 ENERVISTA UR SETUP SOFTWARE INTERFACE
4.1.1 INTRODUCTION ................................................................................................4-1
4.1.2 CREATING A SITE LIST....................................................................................4-1
4.1.3 ENERVISTA UR SETUP OVERVIEW................................................................4-1
4.1.4 ENERVISTA UR SETUP MAIN WINDOW..........................................................4-3
4.1.5 SETTINGS TEMPLATES ...................................................................................4-3
4.1.6 SECURING AND LOCKING FLEXLOGIC™ EQUATIONS................................4-8
4.1.7 SETTINGS FILE TRACEABILITY.....................................................................4-10
4.2 FACEPLATE INTERFACE
4.2.1 FACEPLATE.....................................................................................................4-13
4.2.2 LED INDICATORS............................................................................................4-14
4.2.3 CUSTOM LABELING OF LEDS .......................................................................4-17
4.2.4 DISPLAY...........................................................................................................4-23
4.2.5 BREAKER CONTROL......................................................................................4-23
4.2.6 KEYPAD ...........................................................................................................4-24
4.2.7 MENUS.............................................................................................................4-24
4.2.8 CHANGING SETTINGS ...................................................................................4-26
5. SETTINGS 5.1 OVERVIEW
5.1.1 SETTINGS MAIN MENU ....................................................................................5-1
5.1.2 INTRODUCTION TO ELEMENTS......................................................................5-4
5.1.3 INTRODUCTION TO AC SOURCES..................................................................5-5
5.2 PRODUCT SETUP
5.2.1 SECURITY..........................................................................................................5-8
5.2.2 DISPLAY PROPERTIES ..................................................................................5-11
5.2.3 CLEAR RELAY RECORDS..............................................................................5-13
5.2.4 COMMUNICATIONS ........................................................................................5-14
5.2.5 MODBUS USER MAP......................................................................................5-33
5.2.6 REAL TIME CLOCK .........................................................................................5-34
5.2.7 FAULT REPORTS............................................................................................5-35
5.2.8 OSCILLOGRAPHY...........................................................................................5-37
5.2.9 DATA LOGGER................................................................................................5-39
5.2.10 DEMAND ..........................................................................................................5-41
5.2.11 USER-PROGRAMMABLE LEDS .....................................................................5-42
5.2.12 USER-PROGRAMMABLE SELF-TESTS.........................................................5-45
5.2.13 CONTROL PUSHBUTTONS............................................................................5-46
5.2.14 USER-PROGRAMMABLE PUSHBUTTONS....................................................5-47
5.2.15 FLEX STATE PARAMETERS ..........................................................................5-52
5.2.16 USER-DEFINABLE DISPLAYS........................................................................5-53

GE Multilin F60 Feeder Protection System vii
TABLE OF CONTENTS
5.2.17 DIRECT INPUTS/OUTPUTS ...........................................................................5-55
5.2.18 TELEPROTECTION.........................................................................................5-63
5.2.19 INSTALLATION................................................................................................5-63
5.3 SYSTEM SETUP
5.3.1 AC INPUTS......................................................................................................5-65
5.3.2 POWER SYSTEM............................................................................................5-66
5.3.3 SIGNAL SOURCES.........................................................................................5-67
5.3.4 BREAKERS......................................................................................................5-70
5.3.5 DISCONNECT SWITCHES .............................................................................5-74
5.3.6 FLEXCURVES™..............................................................................................5-77
5.4 FLEXLOGIC™
5.4.1 INTRODUCTION TO FLEXLOGIC™...............................................................5-84
5.4.2 FLEXLOGIC™ RULES ....................................................................................5-94
5.4.3 FLEXLOGIC™ EVALUATION..........................................................................5-94
5.4.4 FLEXLOGIC™ EXAMPLE ...............................................................................5-95
5.4.5 FLEXLOGIC™ EQUATION EDITOR...............................................................5-99
5.4.6 FLEXLOGIC™ TIMERS...................................................................................5-99
5.4.7 FLEXELEMENTS™ .......................................................................................5-101
5.4.8 NON-VOLATILE LATCHES ...........................................................................5-105
5.5 GROUPED ELEMENTS
5.5.1 OVERVIEW....................................................................................................5-106
5.5.2 SETTING GROUP .........................................................................................5-106
5.5.3 LOAD ENCROACHMENT..............................................................................5-107
5.5.4 PHASE CURRENT ........................................................................................5-109
5.5.5 NEUTRAL CURRENT....................................................................................5-119
5.5.6 WATTMETRIC GROUND FAULT..................................................................5-127
5.5.7 GROUND CURRENT.....................................................................................5-130
5.5.8 NEGATIVE-SEQUENCE CURRENT.............................................................5-132
5.5.9 BREAKER FAILURE......................................................................................5-138
5.5.10 VOLTAGE ELEMENTS.................................................................................. 5-147
5.5.11 SENSITIVE DIRECTIONAL POWER.............................................................5-155
5.6 CONTROL ELEMENTS
5.6.1 OVERVIEW....................................................................................................5-158
5.6.2 SETTING GROUPS.......................................................................................5-158
5.6.3 SELECTOR SWITCH.....................................................................................5-159
5.6.4 UNDERFREQUENCY.................................................................................... 5-165
5.6.5 OVERFREQUENCY ......................................................................................5-166
5.6.6 FREQUENCY RATE OF CHANGE................................................................5-167
5.6.7 SYNCHROCHECK.........................................................................................5-169
5.6.8 AUTORECLOSE............................................................................................5-173
5.6.9 DIGITAL ELEMENTS.....................................................................................5-179
5.6.10 DIGITAL COUNTERS....................................................................................5-182
5.6.11 MONITORING ELEMENTS ...........................................................................5-184
5.6.12 COLD LOAD PICKUP....................................................................................5-201
5.6.13 TRIP BUS....................................................................................................... 5-203
5.7 INPUTS/OUTPUTS
5.7.1 CONTACT INPUTS........................................................................................5-205
5.7.2 VIRTUAL INPUTS..........................................................................................5-207
5.7.3 CONTACT OUTPUTS....................................................................................5-208
5.7.4 VIRTUAL OUTPUTS......................................................................................5-210
5.7.5 REMOTE DEVICES.......................................................................................5-211
5.7.6 REMOTE INPUTS..........................................................................................5-212
5.7.7 REMOTE OUTPUTS......................................................................................5-213
5.7.8 RESETTING...................................................................................................5-214
5.7.9 DIRECT INPUTS/OUTPUTS .........................................................................5-214
5.7.10 TELEPROTECTION INPUTS/OUTPUTS......................................................5-218
5.8 TRANSDUCER INPUTS/OUTPUTS
5.8.1 DCMA INPUTS ..............................................................................................5-220
5.8.2 RTD INPUTS..................................................................................................5-221
5.8.3 DCMA OUTPUTS ..........................................................................................5-222
5.9 TESTING
5.9.1 TEST MODE..................................................................................................5-226
5.9.2 FORCE CONTACT INPUTS..........................................................................5-226
5.9.3 FORCE CONTACT OUTPUTS......................................................................5-227

viii F60 Feeder Protection System GE Multilin
TABLE OF CONTENTS
6. ACTUAL VALUES 6.1 OVERVIEW
6.1.1 ACTUAL VALUES MAIN MENU.........................................................................6-1
6.2 STATUS
6.2.1 CONTACT INPUTS ............................................................................................6-3
6.2.2 VIRTUAL INPUTS ..............................................................................................6-3
6.2.3 REMOTE INPUTS ..............................................................................................6-3
6.2.4 TELEPROTECTION INPUTS.............................................................................6-4
6.2.5 CONTACT OUTPUTS........................................................................................6-4
6.2.6 VIRTUAL OUTPUTS ..........................................................................................6-5
6.2.7 AUTORECLOSE.................................................................................................6-5
6.2.8 REMOTE DEVICES............................................................................................6-5
6.2.9 DIGITAL COUNTERS.........................................................................................6-7
6.2.10 SELECTOR SWITCHES ....................................................................................6-7
6.2.11 FLEX STATES....................................................................................................6-7
6.2.12 ETHERNET ........................................................................................................6-7
6.2.13 HI-Z STATUS......................................................................................................6-8
6.2.14 DIRECT INPUTS ................................................................................................6-8
6.2.15 DIRECT DEVICES STATUS ..............................................................................6-9
6.2.16 EGD PROTOCOL STATUS................................................................................6-9
6.2.17 TELEPROTECTION CHANNEL TESTS...........................................................6-10
6.2.18 INCIPIENT FAULT DETECTOR.......................................................................6-10
6.2.19 ETHERNET SWITCH .......................................................................................6-11
6.3 METERING
6.3.1 METERING CONVENTIONS ...........................................................................6-12
6.3.2 SOURCES........................................................................................................6-15
6.3.3 SENSITIVE DIRECTIONAL POWER ...............................................................6-21
6.3.4 SYNCHROCHECK ...........................................................................................6-21
6.3.5 TRACKING FREQUENCY................................................................................6-21
6.3.6 FREQUENCY RATE OF CHANGE ..................................................................6-22
6.3.7 FLEXELEMENTS™..........................................................................................6-22
6.3.8 IEC 61580 GOOSE ANALOG VALUES ...........................................................6-23
6.3.9 WATTMETRIC GROUND FAULT.....................................................................6-23
6.3.10 TRANSDUCER INPUTS/OUTPUTS.................................................................6-23
6.4 RECORDS
6.4.1 FAULT REPORTS............................................................................................6-24
6.4.2 EVENT RECORDS...........................................................................................6-24
6.4.3 OSCILLOGRAPHY...........................................................................................6-25
6.4.4 DATA LOGGER................................................................................................6-25
6.4.5 BREAKER MAINTENANCE .............................................................................6-26
6.4.6 HI-Z RECORDS................................................................................................6-26
6.5 PRODUCT INFORMATION
6.5.1 MODEL INFORMATION...................................................................................6-27
6.5.2 FIRMWARE REVISIONS..................................................................................6-27
7. COMMANDS AND
TARGETS 7.1 COMMANDS
7.1.1 COMMANDS MENU...........................................................................................7-1
7.1.2 VIRTUAL INPUTS ..............................................................................................7-1
7.1.3 CLEAR RECORDS.............................................................................................7-1
7.1.4 SET DATE AND TIME........................................................................................7-2
7.1.5 RELAY MAINTENANCE.....................................................................................7-2
7.2 TARGETS
7.2.1 TARGETS MENU ...............................................................................................7-4
7.2.2 TARGET MESSAGES........................................................................................7-4
7.2.3 RELAY SELF-TESTS .........................................................................................7-4
8. THEORY OF OPERATION 8.1 HIGH-IMPEDANCE (HI-Z) FAULT DETECTION
8.1.1 DESCRIPTION ...................................................................................................8-1
8.1.2 ENERGY ALGORITHM ......................................................................................8-1

GE Multilin F60 Feeder Protection System ix
TABLE OF CONTENTS
8.1.3 RANDOMNESS ALGORITHM...........................................................................8-2
8.1.4 EXPERT ARC DETECTOR ALGORITHM.........................................................8-2
8.1.5 SPECTRAL ANALYSIS ALGORITHM...............................................................8-2
8.1.6 LOAD EVENT DETECTOR ALGORITHM .........................................................8-2
8.1.7 LOAD ANALYSIS ALGORITHM ........................................................................8-3
8.1.8 LOAD EXTRACTION ALGORITHM................................................................... 8-3
8.1.9 ARC BURST PATTERN ANALYSIS ALGORITHM............................................8-3
8.1.10 ARCING SUSPECTED ALGORITHM................................................................8-3
8.1.11 OVERCURRENT DISTURBANCE MONITORING ............................................ 8-3
8.1.12 HI-Z EVEN HARMONIC RESTRAINT ALGORITHM.........................................8-3
8.1.13 HI-Z VOLTAGE SUPERVISION ALGORITHM ..................................................8-4
8.2 FAULT LOCATOR
8.2.1 FAULT TYPE DETERMINATION.......................................................................8-5
9. COMMISSIONING 9.1 TESTING
9.1.1 TESTING UNDERFREQUENCY AND OVERFREQUENCY ELEMENTS.........9-1
A. FLEXANALOG
PARAMETERS A.1 PARAMETER LIST
A.1.1 FLEXANALOG LIST...........................................................................................A-1
B. MODBUS
COMMUNICATIONS B.1 MODBUS RTU PROTOCOL
B.1.1 INTRODUCTION................................................................................................B-1
B.1.2 PHYSICAL LAYER.............................................................................................B-1
B.1.3 DATA LINK LAYER............................................................................................B-1
B.1.4 CRC-16 ALGORITHM........................................................................................B-2
B.2 MODBUS FUNCTION CODES
B.2.1 SUPPORTED FUNCTION CODES ...................................................................B-3
B.2.2 READ ACTUAL VALUES OR SETTINGS (FUNCTION CODE 03/04H) ...........B-3
B.2.3 EXECUTE OPERATION (FUNCTION CODE 05H)...........................................B-4
B.2.4 STORE SINGLE SETTING (FUNCTION CODE 06H).......................................B-4
B.2.5 STORE MULTIPLE SETTINGS (FUNCTION CODE 10H) ................................B-5
B.2.6 EXCEPTION RESPONSES...............................................................................B-5
B.3 FILE TRANSFERS
B.3.1 OBTAINING RELAY FILES VIA MODBUS........................................................B-6
B.3.2 MODBUS PASSWORD OPERATION ...............................................................B-8
B.4 MEMORY MAPPING
B.4.1 MODBUS MEMORY MAP .................................................................................B-9
B.4.2 DATA FORMATS.............................................................................................B-60
C. IEC 61850
COMMUNICATIONS C.1 OVERVIEW
C.1.1 INTRODUCTION................................................................................................C-1
C.1.2 COMMUNICATION PROFILES.........................................................................C-1
C.2 SERVER DATA ORGANIZATION
C.2.1 OVERVIEW........................................................................................................C-2
C.2.2 GGIO1: DIGITAL STATUS VALUES .................................................................C-2
C.2.3 GGIO2: DIGITAL CONTROL VALUES..............................................................C-2
C.2.4 GGIO3: DIGITAL STATUS AND ANALOG VALUES FROM RECEIVED GOOSE
DATAC-2
C.2.5 GGIO4: GENERIC ANALOG MEASURED VALUES.........................................C-2
C.2.6 MMXU: ANALOG MEASURED VALUES...........................................................C-3
C.2.7 PROTECTION AND OTHER LOGICAL NODES...............................................C-3
C.3 SERVER FEATURES AND CONFIGURATION
C.3.1 BUFFERED/UNBUFFERED REPORTING........................................................C-5

x F60 Feeder Protection System GE Multilin
TABLE OF CONTENTS
C.3.2 FILE TRANSFER...............................................................................................C-5
C.3.3 TIMESTAMPS AND SCANNING.......................................................................C-5
C.3.4 LOGICAL DEVICE NAME .................................................................................C-5
C.3.5 LOCATION ........................................................................................................C-5
C.3.6 LOGICAL NODE NAME PREFIXES..................................................................C-6
C.3.7 CONNECTION TIMING.....................................................................................C-6
C.3.8 NON-IEC 61850 DATA......................................................................................C-6
C.3.9 COMMUNICATION SOFTWARE UTILITIES.....................................................C-6
C.4 GENERIC SUBSTATION EVENT SERVICES: GSSE AND GOOSE
C.4.1 OVERVIEW .......................................................................................................C-7
C.4.2 GSSE CONFIGURATION..................................................................................C-7
C.4.3 FIXED GOOSE..................................................................................................C-7
C.4.4 CONFIGURABLE GOOSE................................................................................C-7
C.4.5 ETHERNET MAC ADDRESS FOR GSSE/GOOSE ..........................................C-9
C.4.6 GSSE ID AND GOOSE ID SETTINGS............................................................C-10
C.5 IEC 61850 IMPLEMENTATION VIA ENERVISTA UR SETUP
C.5.1 OVERVIEW .....................................................................................................C-11
C.5.2 CONFIGURING IEC 61850 SETTINGS ..........................................................C-12
C.5.3 ABOUT ICD FILES..........................................................................................C-13
C.5.4 CREATING AN ICD FILE WITH ENERVISTA UR SETUP..............................C-17
C.5.5 ABOUT SCD FILES.........................................................................................C-17
C.5.6 IMPORTING AN SCD FILE WITH ENERVISTA UR SETUP...........................C-20
C.6 ACSI CONFORMANCE
C.6.1 ACSI BASIC CONFORMANCE STATEMENT ................................................C-22
C.6.2 ACSI MODELS CONFORMANCE STATEMENT............................................C-22
C.6.3 ACSI SERVICES CONFORMANCE STATEMENT.........................................C-23
C.7 LOGICAL NODES
C.7.1 LOGICAL NODES TABLE...............................................................................C-26
D. IEC 60870-5-104
COMMUNICATIONS D.1 IEC 60870-5-104
D.1.1 INTEROPERABILITY DOCUMENT...................................................................D-1
D.1.2 IEC 60870-5-104 POINT LIST...........................................................................D-9
E. DNP COMMUNICATIONS E.1 DEVICE PROFILE DOCUMENT
E.1.1 DNP V3.00 DEVICE PROFILE..........................................................................E-1
E.1.2 IMPLEMENTATION TABLE ..............................................................................E-4
E.2 DNP POINT LISTS
E.2.1 BINARY INPUT POINTS ...................................................................................E-8
E.2.2 BINARY AND CONTROL RELAY OUTPUT......................................................E-9
E.2.3 COUNTERS.....................................................................................................E-10
E.2.4 ANALOG INPUTS............................................................................................E-11
F. MISCELLANEOUS F.1 CHANGE NOTES
F.1.1 REVISION HISTORY......................................................................................... F-1
F.1.2 CHANGES TO THE F60 MANUAL.................................................................... F-2
F.2 ABBREVIATIONS
F.2.1 STANDARD ABBREVIATIONS......................................................................... F-4
F.3 WARRANTY
F.3.1 GE MULTILIN WARRANTY............................................................................... F-6
INDEX