Gestetner 10512 User manual

Copying
72
2
Scanning Position
You can move the scanned position of each originals.
1. Point where the machine starts
scanning.
Note
❒You can move the scanned position up from 0 to 30 mm (in 1 mm increments),
0 to 1.2 inch (in 0.1 inch increments) upward, downward, left and right.
❒
1. Top: 0 –30 mm (0" –1.2")
2. Right: 0 –30 mm (0" –1.2")
3. Bottom: 0 –30 mm (0" –1.2")
4. Left: 0 –30 mm (0" –1.2")
A
AA
APress [Edit].
B
BB
BPress [Scan Position].
1
1
2
3
4

Copy Functions
73
2
C
CC
CSet the scan position for the face of the original. Press [↑
↑↑
↑]or [↓
↓↓
↓]to set the
top or bottom position. Press [←
←←
←]or [→
→→
→]to set the left or right position.
Note
❒If you have incorrectly set the position, readjust with [↑
↑↑
↑], [↓
↓↓
↓], [←
←←
←], or [→
→→
→].
❒If you do not need to set the scan position of the back of the original, pro-
ceed to step E.
D
DD
DSet the scan position for the back of the original. Press [↑
↑↑
↑]or [↓
↓↓
↓]to set the
top or bottom position. Press [←
←←
←]or [→
→→
→]to set the left or right position.
Note
❒The scan position set here for the back of originals is valid when you copy
2-sided originals.
E
EE
EPlace originals, and then press the {
{{
{Start}
}}
}key.

Copying
74
2
Margin Adjustment
You can shift the image to the left, right, top or bottom to make a binding mar-
gin.
Reference
For initial settings, see p.131 “Front Page Margin : Left/Right”, p.131 “Back
Side Margins : Left/Right”, p.132 “Front Side Margin : Top/Bottom”, and
p.132 “Back Side Margin : Top/Bottom”.
Note
❒You can change the width of the binding margin up to 30 mm in 1 mm incre-
ments (1.2 inch in 0.1 inch steps) upward, downward, left and right.
A
AA
APress [Edit].
B
BB
BPress [Margin Adj.].
C
CC
CSet a binding margin for a front page. Press [←
←←
←]and [→
→→
→]when setting the
left and right margins, and [↓
↓↓
↓]and [↑
↑↑
↑]when setting the top and bottom mar-
gins.
Note
❒To change the value entered, press [←
←←
←], [→
→→
→], [↓
↓↓
↓], and [↑
↑↑
↑]to set the new val-
ue.
❒If you do not need to specify margins for the back side pages, proceed to
step E.
D
DD
DSet a binding margin for the back side pages. Press [←
←←
←]and [→
→→
→]when set-
ting the left and right margins, and [↓
↓↓
↓]and [↑
↑↑
↑]when setting the top and bot-
tom margins.
Note
❒Margin on the back side of the page is available only when [Duplex], [1 Sided
Combine]or [2 Sided Combine]is selected.
E
EE
EPlace originals, and then press the {
{{
{Start}
}}
}key.
AA

Copy Functions
75
2
Erase
This function erases the center and/or all four sides of the original image. This
function also erases the inside or outside of a specified area.
This function has the following three types:
❖
❖❖
❖Border
This mode erases edge margin of the original image.
❖
❖❖
❖Center/Border
This mode erases both the center and edge margins from an original image.
❖
❖❖
❖Inside
This mode blanks out a designated area of the copy image.

Copying
76
2
❖
❖❖
❖Outside
This mode blanks out all areas of the copy image except the area you specify.
Reference
The erase width in the [Border], [Center], and [Center/Border]modes is set to
10 mm (0.4") by default. You can change this settings with the User Tools.
See p.132 “Erase Border Width”.
Note
❒The relation between the original orientation and the erased part is as follows:
1. Erased part
2. 2 –99 mm (0.1" –3.9")
Border Erase
A
AA
APress [Edit].
B
BB
BPress [Erase Border].
C
CC
CSet an erase border width.
Selecting [Same Width]
APress [Same Width].
BSet an erase border width using [n
nn
n]and [o
oo
o].
Note
❒To change the value entered, press [n
nn
n]and [o
oo
o]to set the new value.
Loriginal Koriginal
1
2
1
2

Copy Functions
77
2
Selecting [Diff. Width]
APress [Diff. Width].
BPress the key for the border you want to change, and then set an erase
border width using [n
nn
n]and [o
oo
o].
D
DD
DPress [2-sided Setting], and then [Original (Back)].
Note
❒If you do not need to erase the border on the back of the original, proceed
to step F.
E
EE
ESet the border to be erased the back.
Note
❒Erasing the border on the back is valid only when you copy two-sided
originals.
F
FF
FPlace originals, and then press the {
{{
{Start}
}}
}key.
Center/border erase
A
AA
APress [Edit].
B
BB
BPress [Erase Cntr/Brdr.].
C
CC
CSet the border to be erased.

Copying
78
2
Selecting [Same Width]
APress [Same Width].
BPress [Center], and then set the erase center width using [n
nn
n]and [o
oo
o].
CPress [Border], and then set the erase border width using [n
nn
n]and [o
oo
o].
Selecting [Diff. Width]
APress [Diff. Width].
BPress the key for the part you want to change, and then set an erase mar-
gin width with [n
nn
n]and [o
oo
o].
D
DD
DPress [2-sided Setting]and [Original (Back)].
Note
❒If you do not need to erase the center or border on the back of the original,
proceed to step F.
E
EE
ESet the center or border to be erased on the back.
Note
❒Erasing the center or border on the back is valid only when you copy two-
sided originals.
F
FF
FPlace originals, and then press the {
{{
{Start}
}}
}key.

Copy Functions
79
2
Inside erase
Decide where the machine starts (X1, Y1) and stops erasing (X2, Y2).
Note
❒You can input lengths of 0 –432 mm (0 –17 inch).
A
AA
APress [Edit].
B
BB
BPress [Erase Area].
C
CC
CPress [Erase Inside 1]or [Erase Inside 2].
D
DD
DEnter the value of [X1]using the number keys, and then press [#]or the {
{{
{#}
}}
}
key.
E
EE
EEnter the value of [Y1]using the number keys, and then press [#]or the {
{{
{#}
}}
}
key.
F
FF
FEnter the value of [X2]using the number keys, and then press [#]or the {
{{
{#}
}}
}
key.
G
GG
GEnter the value of [Y2]using the number keys, and then press [#]or the {
{{
{#}
}}
}
key.
H
HH
HPress [2-sided Setting]and [Original (Back)].
Note
❒If you do not need to erase the image on the back, proceed to step K.
I
II
IEnter the values of [X1], [Y1], [X2], and [Y2]for the back.
Note
❒Erasing the image on the back of originals is valid when you copy two-sid-
ed originals.
J
JJ
JPress [OK].
K
KK
KPlace originals, and then press the {
{{
{Start}
}}
}key.

Copying
80
2
Outside erase
Decide where the machine starts (X1, Y1) and stops erasing (X2, Y2).
Note
❒You can input lengths of 0 –432 mm (0 –17 inch).
A
AA
APress [Edit].
B
BB
BPress [Erase Area].
C
CC
CPress [Erase Outside].
D
DD
DEnter the value of [X1]using the number keys, and then press [#]or the {
{{
{#}
}}
}
key.
E
EE
EEnter the value of [Y1]using the number keys, and then press [#]or the {
{{
{#}
}}
}
key.
F
FF
FEnter the value of [X2]using the number keys, and then press [#]or the {
{{
{#}
}}
}
key.
G
GG
GEnter the value of [Y2]using the number keys, and then press [#]or the {
{{
{#}
}}
}
key.
H
HH
HPress [2-sided Setting]and [Original (Back)].
Note
❒If you do not need to erase the image on the back of originals, proceed to
step K.
I
II
IEnter the values of [X1], [Y1], [X2], and [Y2]for the back.
Note
❒Erasing the image on the back of originals is valid when you copy two-sid-
ed originals.
J
JJ
JPress [OK].
K
KK
KPlace originals, and then press the {
{{
{Start}
}}
}key.

Copy Functions
81
2
3 Edges Full Bleed
You can make full image copy by cutting down the top, bottom, and right side
margins. This function is useful for densely-filled originals.
A
AA
APress [Edit].
B
BB
BPress [Edit Image].
C
CC
CPress [3 Edges Full Bleed].
D
DD
DPlace originals, and then press the {
{{
{Start}
}}
}key.

Copying
82
2
Double Copies
An original image is copied twice onto one copy, as shown in the illustration.
Note
❒See the following table for original and copy paper sizes when using a 100%
ratio. Originals of size A5L(51/2" ×81/2"L) cannot be detected properly on
the exposure glass. Be sure to manually select such copy paper, or place the
originals in the ADF.
❖
❖❖
❖Metric version
❖
❖❖
❖Inch version
Reference
For selecting a separation line, see p.133 “Double Copies Separation Line”.
A
AA
APress [Edit].
B
BB
BPress [Edit Image].
C
CC
CPress [Double Copies].
D
DD
DSelect the paper size.
E
EE
EPlace originals, and then press the {
{{
{Start}
}}
}key.
Original size and orientation Copy paper size and orientation
A5LA4K
A4KA3L
A5KA4L
Original size and orientation Copy paper size and orientation
51/2" ×81/2"L81/2" ×11"K
51/2" ×81/2"K81/2" ×11"L
81/2" ×11"K11" ×17"L

Copy Functions
83
2
Image Repeat
The original image is copied repeatedly.
Note
❒The number of repeated images depends on original size, copy paper size,
and reproduction ratio. See the following table.
Metric version Inch version
Original / Copy paper Original / Copy Paper
A5K/A4K
A5L/A4L
51/2" ×81/2"K/81/2" ×11"K
51/2" ×81/2"L/81/2" ×11"L
4 repeats
71% 65%
16 repeats
35% 32%
A5K/A4L
A5L/A4K
51/2" ×81/2"K/81/2" ×11"L
51/2" ×81/2"L/81/2" ×11"K
2 repeats
100%
Repeat 1
Repeat 2
Repeat 3

Copying
84
2
Reference
For selecting a separation line, see p.133 “Image Repeat Separation Line”.
A
AA
ASelect the size of the copy paper and the reproduction ratio.
B
BB
BPress [Edit].
C
CC
CPress [Edit Image].
D
DD
DPress [Image Repeat].
E
EE
EPlace an original, and then press the {
{{
{Start}
}}
}key.
8 repeats
50%
32 repeats
25%
Metric version Inch version
Repeat 4
Repeat 5

Copy Functions
85
2
Centering
You can make copies with the image moved to the center of the paper.
Note
❒Original sizes and orientations for centering are shown below.
❖
❖❖
❖Metric version
*1 You can select from 81/2" ×13", 81/4" ×13" and 8" ×13" with the User Tools (System
Settings). See “Original: <F/F4> Size Setting”, General Settings Guide.
❖
❖❖
❖Inch version
*1 You can select from 81/2" ×13", 81/4" ×13" and 8" ×13" with the User Tools (System
Settings). See “Original: <F/F4> Size Setting”, General Settings Guide.
A
AA
ASelect the paper.
B
BB
BPress [Edit].
C
CC
CPress [Edit Image].
D
DD
DPress [Centring].
E
EE
EPlace originals, and then press the {
{{
{Start}
}}
}key.
Where Original Is Set Paper Size and Orientation
Exposure glass A3L, B4L, A4KL, 81/2" ×13" L*1
Document feeder A3L, B4L, A4KL, A5KL, 11" ×17"L, 82/1" ×
11"KL, 81/2" ×13" L*1
Where Original Is Set Paper Size and Orientation
Exposure glass 11" ×17"L, 81/2" ×14"L, 81/2" ×11"KL
Document feeder A4KL, 11" ×17"L, 11" ×15"L, 81/2" ×14"L, 81/2" ×
11"KL, 51/2" ×81/2"KL, 81/2" ×13" L*1

Copying
86
2
Covers
Using this function, you can create cover sheets by adding additional pages of
different paper or copying existing pages on different paper.
Preparation
Before selecting this function, set the tray for the front cover paper. See “Front
Cover”or “Back Cover”, General Settings Guide.
Note
❒When selecting [Copy], select whether the front and back covers are copied
one-sided or two-sided. See “Front Cover”or “Back Cover”, General Settings
Guide.
Reference
You can select the orientation of the back cover, Face up or Face down. See
p.131 “Copy Back Cover”.
To place paper when using the interposer, see “Loading Paper in the Inter-
poser”, General Settings Guide.
❖
❖❖
❖Front Cover
The first page of your originals is copied on special cover paper, or a cover
sheet is inserted before the first copy.
•Copy
•Blank
3
2
1
3
2
1
3
2
1
3
2
1

Copy Functions
87
2
❖
❖❖
❖Back Covers
The first and last pages of the original are copied on separate paper for cover
use.
•Copy
•Blank
Reference
When you select Front Cover copier mode, you can make a combined copy
on the front cover. See p.135 “Front Cover Copy in Combine”.
A
AA
APress [Cover/Slip Sheet].
B
BB
BSelect [Copy]or [Blank]for the front and back cover sheet.
C
CC
CSelect the paper tray containing non-cover sheet paper.
D
DD
DPlace originals in the ADF, and then press the {
{{
{Start}
}}
}key.
3
2
1
4
3
2
1
4
GCCOVE1J

Copying
88
2
Designate
The following functions are explained in this section:
❖
❖❖
❖Designate: Copy
Use this function to designate certain pages of your original to be copied onto
slip sheets.
❖
❖❖
❖Designate: Blank
Use this function to insert the slip sheet into certain pages of your original.
Note
❒When selecting [Designate : Copy], set the same designation sheet as the copy
paper in the same orientation.
❒You can not select the inteposer as the copy paper.
❒Except to the tray selecting for copy paper, you can use for designation sheets.
❒You can specify up to 100 designate locations.
Reference
To place paper when using the interposer. See “Loading paper in the Inter-
poser”, General Settings Guide.
A
AA
APress [Cover/Slip Sheet].
B
BB
BPress [Designate].

Copy Functions
89
2
C
CC
CPress [Designate: Copy]or [Designate: Blank].
D
DD
DSelect the tray you want to use.
E
EE
EEnter the number of the originals you want to copy onto slip sheets using
the number keys, and then select the tray the slip sheets have been set.
F
FF
FPress the {
{{
{#}
}}
}key.
G
GG
GTo specify another page number, repeat steps E
EE
Eand F
FF
F.
H
HH
HSelect the tray for the main sheet.
I
II
IWhen all settings have been made, press [OK].
J
JJ
JPlace originals, and then press the {
{{
{Start}
}}
}key.
Chapters
When using one-sided to two-sided copying, the page locations you specify with
this function will appear on the front of copy sheets beginning a new chapter.
Preparation
Before selecting this function, press [Dup./Combine/Series]and select “1 Sided”
for original, and “2 Sided”for copy.
Note
❒You can specify up to 100 chapter locations.
❒This function can be combined with the 2 Sided or Combine function.
GCSHOW0E

Copying
90
2
A
AA
APress [Cover/Slip Sheet].
B
BB
BPress [Designate].
C
CC
CPress [Chapter].
D
DD
DPress the chapter number to set.
E
EE
EEnter the page location of the first page of the first chapter using the num-
ber keys, and then press the {
{{
{#}
}}
}key.
This display shows example settings.
Note
❒To change the value entered, press the {
{{
{Clear}
}}
}key, and then enter the new
value.
F
FF
FTo specify another page location, repeat step E
EE
E.
G
GG
GSelect the tray for main sheet.
H
HH
HWhen you finish specifying the page location, press [OK].
Note
❒To change the number entered, select the desired item, and then enter the
new number.
I
II
IPlace originals, and then press the {
{{
{Start}
}}
}key.

Copy Functions
91
2
Designation Sheet Copy
You can copy designated pages onto slip sheets.
Note
❒When this function is combined with the 2 Sided function, the first page of the
designated pages is copied on the front side of a slip sheet.
❒You can specify up to 100 locations.
A
AA
APress [Cover/Slip Sheet].
B
BB
BPress [Designate].
C
CC
CPress [Designation Sheet Copy].
D
DD
DEnter the sheet number of the originals using the number keys, and then
press the {
{{
{#}
}}
}key.
E
EE
EPress [Page to Page].
Note
❒If you do not need to copy consecutive originals, proceed to step G.
F
FF
FEnter the sheet number of the last original using the number keys.
G
GG
GSelect the tray for designate sheet are set, and then press the {
{{
{#}
}}
}key.
H
HH
HTo specify another page location, repeat step D
DD
Dto G
GG
G.
I
II
ISelect the tray for main sheets.
J
JJ
JAfter all settings, press [OK].
K
KK
KPlace originals, and then press the {
{{
{Start}
}}
}key.
4
3
2
1
GCCOVE2J
4
3
2
1