Getinge Arjohuntleigh AtmosAir 300 User manual

EN
DE
NL
FR
IT
ES
DA
SV
PTBR
TR
EL
FI
NO
Bedienungsanleitung • Gebruikershandleiding • Guide de l'utilisateur
Guida dell'utente • Guía del usuario • Brugervejledning • Användarhandbok
Manual do proprietário • Kullanım Kılavuzu • Οδηγός χρήσης
Käyttöopas • Brukerveiledning
AtmosAir 300 and 300P
Seat Cushion with SAT Technology
Owner's Guide
...with people in mind
KA3GUIDE-AH Rev B • 05/2015

EN
ENGLISH
DEUTSCH
NEDERLANDS
FRANÇAIS
ITALIANO
ESPAÑOL
TÜRKÇE
DANSK
ΕΛΛΗΝΙΚΆ
SVENSKA
SUOMI
PORTUGUÊS (BRASIL)
NORSK

DISCLAIMER OF WARRANTY AND LIMITATION OF LIABILITY
ARJOHUNTLEIGH HEREBY DISCLAIMS ALL EXPRESS OR IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, ON THE ARJOHUNTLEIGH PRODUCT
AS DESCRIBED IN THIS PUBLICATION. ANY WRITTEN WARRANTY OFFERED
BY ARJOHUNTLEIGH SHALL BE EXPRESSLY SET FORTH IN THIS PUBLICATION
OR INCLUDED WITH THE PRODUCT. UNDER NO CIRCUMSTANCES SHALL
ARJOHUNTLEIGH BE LIABLE FOR ANY INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES AND EXPENSES, INCLUDING DAMAGES OR INJURY TO PERSON OR
PROPERTY, DUE IN WHOLE OR IN PART TO THE USE OF THE PRODUCT OTHER
THAN THOSE FOR WHICH DISCLAIMER OF WARRANTY OR LIMITATION OF LIABILITY
IS EXPRESSLY PROHIBITED BY SPECIFIC, APPLICABLE LAW. NO PERSON HAS THE
AUTHORITY TO BIND ARJOHUNTLEIGH TO ANY REPRESENTATION OR WARRANTY
EXCEPT AS SPECIFICALLY SET FORTH IN THIS PARAGRAPH.
Descriptions or specications in ArjoHuntleigh printed matter, including this publication,
are meant solely to generally describe the product at the time of manufacture and do
not constitute any express warranties, except as set forth in the written limited warranty
included with this product. Information in this publication may be subject to change at any
time. Contact ArjoHuntleigh for updates.
IMPORTANT INFORMATION FOR USERS
In order for ArjoHuntleigh products to perform properly, ArjoHuntleigh recommends
the following conditions. Failure to comply with these conditions will void any applicable
warranties.
• Use this product only in accordance with these instructions and applicable
product labeling.
• Assembly, operations, adjustments, extensions, modications, technical maintenance
or repairs must be performed only by qualied personnel authorized by ArjoHuntleigh.
Contact ArjoHuntleigh for information regarding maintenance and repair.
Specic indications, contraindications, warnings, precautions and safety
information exist for ArjoHuntleigh’s therapeutic support systems. It is important
for users to read and familiarize themselves with these instructions and to consult
the treating physician prior to patient placement and product use. Individual patient
conditions may vary.

EN
Table Of Contents
Introduction .......................................................................................................1
Indications ................................................................................................................... 1
Risks and Precautions ................................................................................................ 1
Safety Information ....................................................................................................... 2
Installing the AtmosAir 300 / 300P Seat Cushion ..........................................3
Transfer Patient to the AtmosAir 300 / 300P Seat Cushion ..........................3
Adjust Cushion Positioning (300P Model) .....................................................3
Inflation: ....................................................................................................................... 4
Deflation: ...................................................................................................................... 4
Care and Cleaning ............................................................................................5
General instructions ................................................................................................... 5
Laundering Procedure for Cushion Cover and Inner Liner ..................................... 5
Cleaning Procedure for Hoses and SAT System ...................................................... 5
Preventive Maintenance Schedule..................................................................6
Daily Cleaning .............................................................................................................. 6
Weekly Cleaning .......................................................................................................... 6
Inspection / System Check-Out ................................................................................. 6
Troubleshooting .......................................................................................................... 6
Replacement Parts ...........................................................................................7
Complete Systems ...................................................................................................... 7
Cushion Cover ............................................................................................................. 8
Fleece Inner Liner ........................................................................................................ 9
SAT Systems ................................................................................................................ 9
Positioning Pad (300P only) ....................................................................................... 9
Miscellaneous .............................................................................................................. 9
Parts Diagram ............................................................................................................ 10

Specifications .................................................................................................11
Warranty ..........................................................................................................12
Symbols Used .................................................................................................13
Customer Contact Information ......................................................................14

1
EN
Introduction
It is recommended that all sections of this owner's guide be read prior to product use.
Carefully review the Indications, Risks and Precautions and Safety Information prior
to placing a patient on any AtmosAir™ 300 and 300P Seat Cushion with Self Adjusting
Technology™ (SAT™).
Caregivers should discuss Safety Information, Risks and Precautions and
Contraindications with the patient (or the patient's legal guardians) and the
patient's family.
The AtmosAir Seat Cushion is a unique, dynamic pressure displacement system utilizing
atmospheric pressure and gravity as the energy source. Contained within each cushion
are three, patented SAT cells. These cells deliver dynamic pressure management through
a system of manifolds and preset pressure relief valves. The cushion automatically
recongures itself for elevation / temperature changes and patient movement.
The 300P Model includes an integrated positioning option, which uses a hand-controlled
air pump to adjust the cushion to compensate for pelvic obliquities.
Indications
Model 300
For prevention and / or treatment of skin breakdown.
Model 300P
For prevention and / or treatment of skin breakdown and for improved positioning
with patients exhibiting pelvic obliquities.
Risks and Precautions
Transfer - Standard precautions should be taken during patient transfer.
Patient Migration - Specialty surfaces have different shear and support characteristics
than conventional surfaces and may increase the risk of patient movement, sinking
and / or migration into hazardous positions of entrapment and / or inadvertent exit.
Monitor patients frequently to guard against patient entrapment.

2
Safety Information
Cushion Size - Always choose a properly sized cushion to match the seating area of
the wheelchair making sure the cushion is in proper front to back position and properly
secured.
Disposal - At the end of useful life, dispose of waste according to local requirements.
General Protocols
• Punctures, cuts and tears will prevent proper operation. Avoid contact of sharp
instruments with the AtmosAir 300 and 300P Seat Cushion with SAT.
• Follow all applicable safety rules and institution protocols concerning patient and
caregiver safety.
Patient Weight - The maximum patient weight for this device is 500 lb (227 kg).
In addition, consult the specications for the chair being used. Additional weight
limitations may apply.
Skin Care -Monitor skin conditions regularly and consider adjunct or alternative therapies
for high acuity patients. Give extra attention to any possible pressure points and locations
where moisture or incontinence may occur or collect. Early intervention may be essential
to preventing skin breakdown.

3
EN
Installing the AtmosAir 300 / 300P Seat Cushion
1. Remove AtmosAir Seat Cushion from plastic protective cover.
The cushion cover may appear wrinkled when unpacked. To remove wrinkles,
allow cushion up to 24 hours to acclimate; see Troubleshooting table on page 6
for more information. Wrinkles will not affect ination or function, so cushion may
be used immediately if needed.
2. Check cushion surface for tears or cracking; do not use if tears or cracks are
present.
3. If re-installing cushion onto a new chair or for a new patient, check cushion
surface for staining and soiling; clean and / or disinfect as required
(see Care and Cleaning section on page 5).
4. Lock brakes on wheelchair.
5. Remove any existing cushion from wheelchair.
6. Position the AtmosAir Seat Cushion on the wheelchair ensuring that the cushion
is oriented correctly. Ensure there are no gaps at the sides or back of the cushion.
Ensure the cushion is properly secured to prevent sliding or shifting.
Transfer Patient to the AtmosAir 300 /
300P Seat Cushion
1. Verify all brakes are locked.
2. Transfer patient following all applicable safety rules and institution protocols.
Adjust Cushion Positioning (300P Model)
There are three sections of the seat cushion that can be inated separately or in any
combination. The three sections are the left buttock / thigh area, the right buttock / thigh
area and the front area of the cushion.
Hand Pump
Hand Pump Connector
Right Section
Left Section
Front Section
Right Front Left

4
Ination:
1. Connect the hand pump to the desired section
of tubing by rmly pressing the hand pump
connector to the exposed tubing connector.
A click will be heard when the connection
is complete.
2. Before attempting to inate, make sure hand
pump valve is turned clockwise to the
locked position.
3. Squeeze the hand pump bulb until desired
ination is achieved.
4. Disconnect the hand pump from cushion
tubing by pressing on metal release
mechanism.
Deation:
1. Reconnect hand pump to the desired section of tubing as described in step 1,
above.
2. Turn hand pump valve counterclockwise to the unlock position.
3. When the desired state of deation is reached, return hand pump valve to
the locked position.
4. Disconnect hand pump as described in step 4, above.
Tubing Connector
Hand Pump
Connector
Hand Pump
Hand Pump Valve
Metal Release Mechanism
(Tubing connector)

5
EN
Care and Cleaning
General instructions
When blood and / or body uids are present, consult a healthcare professional
for proper use of the following throughout all cleaning procedures:
• impermeable or waterproof gloves
• plastic apron or gown
• protective eyewear
Laundering Procedure for Cushion Cover and Inner Liner
Do not use solvents or alcohol.
1. Set washing machine for warm wash using
the longest wash cycle and cold water rinse.
2. Spray heavily soiled areas with stain-removing
prewash spray.
3. Add a high-quality liquid detergent measured
in accordance with manufacturer’s directions.
Use detergent only. Do not add bleach to wash
water when laundering cushion cover unless it is physician recommended.
Consult your physician if there are specic infection control concerns. Add
a maximum of one cup of bleach to wash water (1/2 oz / 14.78 mL per
gallon / liter).
4. Allow washing machine to agitate for two minutes before adding cushion cover.
5. Add soiled items to washing machine.
Do not overload washing machine. Exceeding the capacity of the machine
may prevent thorough cleaning.
6. Remove items from washer after a full cycle is completed.
7. Remove excess water from cushion cover.
8. Place items into dryer. Tumble dry on low heat. Do not use high heat.
Cleaning Procedure for Hoses and SAT System
The hoses and SAT System should be cleaned using any all-purpose household cleaner
suitable for use on plastics. After cleaning, wipe with a clean dry cloth. DO NOT CLEAN
WITH SOLVENTS OR PRODUCTS NOT SUITABLE FOR PLASTIC PRODUCTS.
ALKOHOLHALTIGT
LÖSNINGSMEDEL
SOAP
SOLVENT ALCOHOL

6
Preventive Maintenance Schedule
Preventive maintenance for the AtmosAir Seat Cushion consists of regular cleaning and
an overall system check-out to be performed at the intervals described below. Refer to
the Care and Cleaning section of this guide for laundry and cleaning procedures.
Daily Cleaning
The cover should be wiped down daily with a mild soap and water solution.
Weekly Cleaning
The cover and eece inner liner should be laundered at least weekly, depending on soiling.
The hoses and SAT System should be cleaned weekly.
Inspection / System Check-Out
Check each of the following before placing the AtmosAir Seat Cushion with a new patient:
1. Check cushion surface for tears or cracking; do not use if tears or cracks are
present.
2. Ensure cushion cover is free of stains and is not overly faded.
Troubleshooting
It is recommended that all sections of this guide be reviewed before troubleshooting any
AtmosAir Seat Cushion.
Do not attempt troubleshooting outside this guide or where the remedy recommends to
contact a ArjoHuntleigh service representative. Any unauthorized service, modication,
alteration, or misuse may lead to serious injury and / or product damage and will void all
applicable warranties.
Symptom Possible Cause Solution
Cushion too rm
upon arrival.
Difference in altitude not
sufcient to open valves.
Apply weight to cushion
to open valves.
Cushion cover too wrinkled
upon removal from
shipping container.
Internal components
have not acclimated to
environment (this does not
affect function).
Let cushion acclimate for 24
hours. If problem continues,
contact ArjoHuntleigh for
assistance.
Positioning pad does not
inate or is not rm.
Tubing not
connected properly.
Check tubing inside cushion
for loose connectors.
Tubing kinked. Check tubing inside cushion
for kinks.
Tubing disconnected. Check tubing inside cushion
for possible disconnect.

7
EN
Replacement Parts*
Complete Systems†
DESCRIPTION PART NO. QTY.
AtmosAir 300 Seat Cushion (SoFleece Top)
16 in W x 16 in L x 4 in H.......................................KA3SFNB1616...................................1
16 in W x 18 in L x 4 in H.......................................KA3SFNB1618...................................1
17 in W x 17 in L x 4 in H.......................................KA3SFNB1717...................................1
18 in W x 16 in L x 4 in H.......................................KA3SFNB1816...................................1
18 in W x 18 in L x 4 in H.......................................KA3SFNB1818...................................1
18 in W x 20 in L x 4 in H.......................................KA3SFNB1820...................................1
20 in W x 20 in L x 4 in H.......................................KA3SFNB2020...................................1
AtmosAir 300 Seat Cushion (Reliant IS2 Top)
16 in W x 16 in L x 4 in H.......................................KA3RENB1616...................................1
16 in W x 18 in L x 4 in H.......................................KA3RENB1618...................................1
17 in W x 17 in L x 4 in H.......................................KA3RENB1717...................................1
18 in W x 16 in L x 4 in H.......................................KA3RENB1816...................................1
18 in W x 18 in L x 4 in H.......................................KA3RENB1818...................................1
18 in W x 20 in L x 4 in H.......................................KA3RENB1820...................................1
20 in W x 20 in L x 4 in H.......................................KA3RENB2020...................................1
AtmosAir 300P Seat Cushion (SoFleece Top)
16 in W x 16 in L x 4 in H.....................................KA3PSFNB1616...................................1
16 in W x 18 in L x 4 in H.....................................KA3PSFNB1618...................................1
17 in W x 17 in L x 4 in H.....................................KA3PSFNB1717...................................1
18 in W x 16 in L x 4 in H.....................................KA3PSFNB1816...................................1
18 in W x 18 in L x 4 in H.....................................KA3PSFNB1818...................................1
18 in W x 20 in L x 4 in H.....................................KA3PSFNB1820...................................1
20 in W x 20 in L x 4 in H.....................................KA3PSFNB2020...................................1
AtmosAir 300P Seat Cushion (Reliant IS2 Top)
16 in W x 16 in L x 4 in H.................................... KA3PRENB1616...................................1
16 in W x 18 in L x 4 in H.................................... KA3PRENB1618...................................1
17 in W x 17 in L x 4 in H.................................... KA3PRENB1717...................................1
18 in W x 16 in L x 4 in H.................................... KA3PRENB1816...................................1
18 in W x 18 in L x 4 in H.................................... KA3PRENB1818...................................1
18 in W x 20 in L x 4 in H.................................... KA3PRENB1820...................................1
20 in W x 20 in L x 4 in H.................................... KA3PRENB2020...................................1
* Subject to availability
† Subject to availability

8
Cushion Cover
DESCRIPTION PART NO. QTY.
AtmosAir 300 Cushion Cover (SoFleece Top)
16 in W x 16 in L x 4 in H.................................... KA3CSFNB1616...................................1
16 in W x 18 in L x 4 in H.................................... KA3CSFNB1618...................................1
17 in W x 17 in L x 4 in H.................................... KA3CSFNB1717...................................1
18 in W x 16 in L x 4 in H.................................... KA3CSFNB1816...................................1
18 in W x 18 in L x 4 in H.................................... KA3CSFNB1818...................................1
18 in W x 20 in L x 4 in H.................................... KA3CSFNB1820...................................1
20 in W x 20 in L x 4 in H.................................... KA3CSFNB2020...................................1
AtmosAir 300 Cushion Cover (Reliant IS2 Top)
16 in W x 16 in L x 4 in H.................................... KA3CRENB1616...................................1
16 in W x 18 in L x 4 in H.................................... KA3CRENB1618...................................1
17 in W x 17 in L x 4 in H.................................... KA3CRENB1717...................................1
18 in W x 16 in L x 4 in H.................................... KA3CRENB1816...................................1
18 in W x 18 in L x 4 in H.................................... KA3CRENB1818...................................1
18 in W x 20 in L x 4 in H.................................... KA3CRENB1820...................................1
20 in W x 20 in L x 4 in H.................................... KA3CRENB2020...................................1
AtmosAir 300P Cushion Cover (SoFleece Top)
16 in W x 16 in L x 4 in H.................................. KA3CPSFNB1616...................................1
16 in W x 18 in L x 4 in H.................................. KA3CPSFNB1618...................................1
17 in W x 17 in L x 4 in H.................................. KA3CPSFNB1717...................................1
18 in W x 16 in L x 4 in H.................................. KA3CPSFNB1816...................................1
18 in W x 18 in L x 4 in H.................................. KA3CPSFNB1818...................................1
18 in W x 20 in L x 4 in H.................................. KA3CPSFNB1820...................................1
20 in W x 20 in L x 4 in H.................................. KA3CPSFNB2020...................................1
AtmosAir 300P Cushion Cover (Reliant IS2 Top)
16 in W x 16 in L x 4 in H..................................KA3CPRENB1616...................................1
16 in W x 18 in L x 4 in H..................................KA3CPRENB1618...................................1
17 in W x 17 in L x 4 in H..................................KA3CPRENB1717...................................1
18 in W x 16 in L x 4 in H..................................KA3CPRENB1816...................................1
18 in W x 18 in L x 4 in H..................................KA3CPRENB1818...................................1
18 in W x 20 in L x 4 in H..................................KA3CPRENB1820...................................1
20 in W x 20 in L x 4 in H..................................KA3CPRENB2020...................................1

9
EN
Fleece Inner Liner
DESCRIPTION PART NO. QTY.
AtmosAir 300 and 300P Fleece Inner Liner
16 in W x 16 in L x 4 in H...........................................KA3CIL1616...................................1
16 in W x 18 in L x 4 in H...........................................KA3CIL1618...................................1
17 in W x 17 in L x 4 in H...........................................KA3CIL1717...................................1
18 in W x 16 in L x 4 in H...........................................KA3CIL1816...................................1
18 in W x 18 in L x 4 in H...........................................KA3CIL1818...................................1
18 in W x 20 in L x 4 in H...........................................KA3CIL1820...................................1
20 in W x 20 in L x 4 in H...........................................KA3CIL2020...................................1
SAT Systems
DESCRIPTION PART NO. QTY.
AtmosAir 300 and 300P SAT System
16 in W x 16 in L x 4 in H..........................................KA3SAT1616...................................1
16 in W x 18 in L x 4 in H..........................................KA3SAT1618...................................1
17 in W x 17 in L x 4 in H..........................................KA3SAT1717...................................1
18 in W x 16 in L x 4 in H..........................................KA3SAT1816...................................1
18 in W x 18 in L x 4 in H..........................................KA3SAT1818...................................1
18 in W x 20 in L x 4 in H..........................................KA3SAT1820...................................1
20 in W x 20 in L x 4 in H..........................................KA3SAT2020...................................1
Positioning Pad (300P only)
DESCRIPTION PART NO. QTY.
AtmosAir 300P Positioning Pad
16 in W x 16 in L x 4 in H............................................KA3PP1616...................................1
16 in W x 18 in L x 4 in H............................................KA3PP1618...................................1
17 in W x 17 in L x 4 in H............................................KA3PP1717...................................1
18 in W x 16 in L x 4 in H............................................KA3PP1816...................................1
18 in W x 18 in L x 4 in H............................................KA3PP1818...................................1
18 in W x 20 in L x 4 in H............................................KA3PP1820...................................1
20 in W x 20 in L x 4 in H............................................KA3PP2020...................................1
Miscellaneous
DESCRIPTION PART NO. QTY.
AtmosAir Seat Cushion Owner’s Guide ................ KA3GUIDE-AH...................................1
Hand Pump for use with 300P............................ KA3HANDPUMP...................................1

10
Parts Diagram
All hoses were removed to improve diagram readability.
Fleece Inner Liner
SAT Cushions
Hand Pump
(300P only)
Positioning Pad
(300P only)
Cushion Cover
Patient Back
Patient Back

11
EN
Specications
Specications subject to change without notice.
Maximum Recommended Patient Weight*....................................................500 lb (227 kg)
Weight (based on 17 in x 17 in x 4 in Seat Cushion, other sizes will vary)
AtmosAir 300 Seat Cushion .............................................................................5 lb (2.27 kg)
AtmosAir 300P Seat Cushion...........................................................................6 lb (2.72 kg)
Dimensions (varies depending on model)†
Length
Minimum......................................................................................................16 in (40.64 cm)
Maximum.....................................................................................................20 in (50.80 cm)
Width
Minimum......................................................................................................16 in (40.64 cm)
Maximum.....................................................................................................20 in (50.80 cm)
Height ............................................................................................................4 in (10.16 cm)
* Maximum patient weight may vary depending on wheelchair / seat weight capacity.
Please consult wheelchair / seat manufacturer.
† Additional sizes are available. Contact your ArjoHuntleigh Representative for
more information.

12
Warranty
5/2-Year Warranty (applicable to sewn cover models only):
In connection with your purchase of an AtmosAir Seat Cushion (sewn cover model), ArjoHuntleigh, Inc. (referred to
herein as “ArjoHuntleigh”) warrants, to the original purchaser, its AtmosAir Seat Cushion against manufacturer’s defects
in material and / or workmanship for a period of ve (5) years from the date of purchase on the Seat Cushion and so long
as all applicable procedures** are followed.
Conditions and Limitations:
Under this warranty, upon reasonable notice, ArjoHuntleigh will replace or repair defective parts or whole units
covered under this warranty at its sole option. No returns or replacements will be allowed without authorization from
ArjoHuntleigh. This warranty applies to material / parts replacement costs and labor costs only and does not include
shipping and handling costs or disposal fees.
This warranty does not extend to, nor cover:
• Patient wearables, such as, but not limited to, non-integrated cover sheets(s) and disposables used in conjunction
with the mattress; or
• Normal wear and tear; or
• Damage, including rust, corrosion or product failure due to causes beyond ArjoHuntleigh’s control such as, but not
limited to abuse, theft, re, ood, wind, lightning, freezing, power failure, power reduction, clogging of mattress
pores due to tobacco smoke, unusual atmospheric conditions, foam deterioration due to exposure to moisture,
or other acts of God; or
• Damage to mattress or mattresses handles through use of the mattress for patient transfer or transport.
ArjoHuntleigh reserves the right to make material changes to the product predicated upon the availability of raw materials
of like quality.
Service beyond that described in the User's Guide must be carried out by ArjoHuntleigh or such other entities as may be
approved by ArjoHuntleigh in writing.
This warranty is VOID if:
• Proof of purchase cannot be made by the original purchaser;
• Adjustment, modication, maintenance, and / or repair beyond that described in the User Manual is carried out by
entities not approved in writing by ArjoHuntleigh;
• The electrical installation of the room does not comply with the appropriate national electrical wiring standards;
• The equipment is not used in accordance with the instructions and warnings enumerated in the User Manual.
This warranty is in no way to be construed as an extension of any periodic or preventive maintenance agreement,
extended service agreement or in-service agreement entered into by the parties.
THE FOREGOING BASIC WARRANTY MADE BY ArjoHuntleigh IS IN LIEU OF ALL OTHER WARRANTIES
EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ArjoHuntleigh IS NOT LIABLE FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES AND EXPENSES, INCLUDING DAMAGES TO PERSON
OR PROPERTY, DUE IN WHOLE OR IN PART TO THE USE OF THE PRODUCT EXCEPT AS OTHERWISE
REQUIRED BY LAW.
**Applicable procedures include, without limitation, those set out in the accompanying User Manual and
other guidelines and procedures provided by ArjoHuntleigh.
NOTE: To the extent any portion of this warranty is held invalid under federal, state or local law, such invalidity
shall not affect the validity of the remaining portions of this warranty agreement, and the parties acknowledge
that it is their intention that such provision (or portion thereof) shall be construed in a manner designed to effectuate
the purposes of such provision to the maximum extent enforceable under applicable law. This warranty gives you
specic legal rights and you may also have other rights which may vary from region to region.

13
EN
Symbols Used
Important operational information
Conforms to the Medical Devices Directive (93/42/EEC) and has been subject to
the conformity procedures laid down in the council directive
Manufacturer
0473

14
Customer Contact Information
For questions regarding this product, supplies, maintenance, or additional information
about ArjoHuntleigh products and service, please contact ArjoHuntleigh or a ArjoHuntleigh
authorized representative, or visit www.ArjoHuntleigh.com. In the US call 1-800-343-0974.
® and ™ are trademarks belonging to the ArjoHuntleigh group of companies ©
ArjoHuntleigh 2015. SAT™ (Self Adjusting Technology™) is a trademark of MPTI, Ltd
KA3GUIDE-AH Rev B 04/2015