Gilson PIPETMAN G User manual

Quick Guide
EN
G

2QUICK GUIDE |PIPETMAN® G
Introduction
PIPETMAN® G is a fully adjustable air-displacement,
pipette that is used with disposable tips.
Eight single channel models cover a volume range from
0.2 µL to 10 mL.
Eight multichannel models cover a volume range from
1 µL to 300 µL.
NOTICE
PIPETMAN G is identified by a visual blue ring.
PIPETMAN G pistons need to be lubricated.
Parts Checklist
Single models
●PIPETMAN G
●PIPETMAN G Quick Guide
●Safety bag
●Dual-position adapter (for P2G and P10G models
only, refer to Fitting the Tips on page 6)
●Certificate of Conformity (including barcode
sticker)
Multichannel models
●PIPETMAN G
●PIPETMAN G Quick Guide
●Safety bag
●Ejector spacers for D10 tips (for Px10G models
only, refer to Ejector Spacers for PIPETMAN G
Multichannel 10 uL on page 6)
●Certificate of Conformity (including barcode
sticker)
GLPCompliant
The serial number is engraved
on the body of the pipette. It
provides unique identification
of your pipette and the date
of manufacture. For more
details, refer to PIPETMAN G
User’s Guide LT801122.
Ex: AA10369
The barcode on the box and
the Certificate of Conformity
provide traceability of your
pipette.
Serial number
Figure 1
Serial number location

3
PIPETMAN® G |QUICK GUIDEQUICK GUIDE |PIPETMAN® G
Description
PIPETMAN®
DIAMOND tip
Tip ejector
Tip holder
Color-coded
push button
Blue ring
Thumbwheel
Tip ejector button
Body or
handle
Connecting nut
Specifications
PIPETMAN G is a high quality pipette that offers
excellent accuracy and precision. The data provided in
the Maximum Permissible Errors table on page 5 were
obtained using PIPETMAN® DIAMOND Tips.
These values are guaranteed only when genuine
PIPETMAN DIAMOND Tips are used.
With a precise pipetting technique the P2G model
may be used to aspirate volumes as low as 0.1 µL
and the P10G model as low as 0.5 µL.
NOTICE
Figure 2
PIPETMAN® G multichannel and single models
Clip tip ejector
Cover
Ejector spacer
Ejector lock
Ejector support

4QUICK GUIDE |PIPETMAN® G
Maximum Permissible Errors
The data provided in the following table conform to the
ISO8655-2 standard.
PIPETMAN G MULTICHANNEL
P8X10G (P/N F144068) P12X10G (P/N F144069) WITH D10 AND DL10 TIPS
1
5
10
± 0.08
± 0.20
± 0.20
≤0.05
≤0.10
≤0.10
± 0.24
± 0.24
± 0.24
≤0.16
≤0.16
≤0.16
P8X20G (P/N F144070) P12X20G (P/N F144071) WITH DL10 TIPS
2
10
20
± 0.10
± 0.20
± 0.40
≤0.08
≤0.10
≤0.20
± 0.4
± 0.4
± 0.4
≤0.20
≤0.20
≤0.20
P8X200G (P/N F144072) P12X200G (P/N F144073) WITH D200 TIPS
20
100
200
± 0.50
± 1.00
± 2.00
≤0.25
≤0.40
≤0.50
± 3.2
± 3.2
± 3.2
≤1.2
≤1.2
≤1.2
P8X300G (P/N F144074) P12X300G (P/NF144075) WITH D300 TIPS
30
150
300
± 1.00
± 1.50
± 3.00
≤0.35
≤0.60
≤1.00
± 8.0
± 8.0
± 8.0
≤3.0
≤3.0
≤3.0
MAXIMUM PERMISSIBLE ERRORS
VOLUME
(µL)
GILSON ISO 8655
SYSTEMATIC
ERROR (µL)
RANDOM
ERROR (µL)
SYSTEMATIC
ERROR (µL)
RANDOM
ERROR (µL)
PIPETMAN G SINGLE CHANNEL
P2G (P/N F144054M) WITH D10 OR DL10 TIPS
0.2
0.5
1
2
± 0.024
± 0.025
± 0.025
± 0.030
≤0.012
≤0.012
≤0.012
≤0.014
± 0.08
± 0.08
± 0.08
± 0.08
≤0.04
≤0.04
≤0.04
≤0.04
P10G (P/N F144055M) WITH D10 OR DL10 TIPS
1
5
10
± 0.025
± 0.075
± 0.100
≤0.012
≤0.030
≤0.040
± 0.12
± 0.12
± 0.12
≤0.08
≤0.08
≤0.08
P20G (P/N F144056M) WITH D200 TIPS
2
10
20
± 0.10
± 0.10
± 0.20
≤0.030
≤0.050
≤0.060
± 0.2
± 0.2
± 0.2
≤0.1
≤0.1
≤0.1
P100G (P/N F144057M) WITH D200 TIPS
10
50
100
± 0.35
± 0.40
± 0.80
≤0.10
≤0.12
≤0.15
± 0.8
± 0.8
± 0.8
≤0.3
≤0.3
≤0.3
P200G (P/N F144058M) WITH D200 TIPS
20
100
200
± 0.50
± 0.80
± 1.60
≤0.20
≤0.25
≤0.30
± 1.6
± 1.6
± 1.6
≤0.6
≤0.6
≤0.6
P1000G (P/N F144059M) WITH D1000 TIPS
100
500
1000
± 3.0
± 4.0
± 8.0
≤0.6
≤1.0
≤1.5
± 8.0
± 8.0
± 8.0
≤3.0
≤3.0
≤3.0
P5000G* (P/N F144066) WITH D5000 TIPS
500
2500
5000
± 12
± 15
± 30
≤3
≤5
≤8
± 40
± 40
± 40
≤15.0
≤15.0
≤15.0
P10mLG* (P/N F144067) WITH D10ML TIPS
1000
5000
10000
± 30
± 40
± 60
≤6
≤10
≤16
± 60
± 60
± 60
≤30.0
≤30.0
≤30.0
* P5000G and P10mLG do not have tip ejectors.

5
PIPETMAN® G |QUICK GUIDEQUICK GUIDE |PIPETMAN® G
Setting the Volume
The volume of liquid to be aspirated is set using the
volumeter. The dials are colored either black or red to
indicate the position of the decimal point, depending on
the model (refer to Figure 3).
The volume is set by turning
the thumbwheel or the push
button (refer to Figure 4). The
push button makes it easier
and faster to set volumes,
especially when wearing
gloves. The thumbwheel may
be turned using only one hand
to slowly reach the required
setting.
To achieve maximum accuracy
when setting the volume,
proceed as follows:
●When decreasing the
volume setting, slowly
reach the required setting,
making sure to not
overshoot the mark.
●When increasing the
volume setting, pass the
required value by 1/3 of
a turn and then slowly
decrease to reach the
volume, making sure to
not overshoot the mark.
MODEL
COLOR OF VOLUMETER NUMBERS
BLACK RED INCREMENT
P2G µL 0.01 µL 0.002 µL
P10G - P20G - Px10G - Px20G µL 0.1 µL 0.02 µL
P100G - P200G - Px200G - Px300G µL - 0.2 µL
P1000G 0.01 mL mL 0.002 mL
P5000G 0.01 mL mL 0.002 mL
P10mLG mL 0.1 mL 0.02 mL
Figure 3
Dial colors by model
1
5
P2G
1.25 µL
2
0
7
5
P10G
7.5 µL
1
2
5
P20G
12.5 µL
P100G
0
7
5
75 µL
P200G
1
2
5
125 µL
P1000G
0
7
5
0.75 mL
P5000G
1
2
5
1.25 mL
P10mLG
0
7
5
7.5 mL
Push button
Thumbwheel
Figure 4
Location of push button and
thumbwheel
* P5000G and P10mLG do not have tip ejectors.
0
7
5
Px10G
7.5 µL
1
2
5
Px20G
12.5 µL
Px200G
1
2
5
125 µL
Px300G
1
2
5
125 µL

6QUICK GUIDE |PIPETMAN® G
Fitting the Tips
To fit a new PIPETMAN DIAMOND Tip, push the tip holder
into the tip using a slight twisting motion to ensure a firm,
airtight seal.
PIPETMAN DIAMOND Tip Compatibility
for Multichannel Models
P8x10G, P12x10G D10*, DL10, DF10, DFL10
P8x20G, P12x20G DL10, DFL10, DF30, D200
P8x200G, P12x200G D200, D300, DF200, DF300
P8x300G, P12x300G D200, D300, DF200, DF300
* Using the broad ejector spacer D10, you can adapt a
D10 tip (see above).
PIPETMAN G is equipped with a stainless steel tip
ejector and can also be used with a plastic tip ejector,
available as an accessory. Refer to PIPETMAN G User’s
Guide LT801122, ACCESSORIES.
Fitting the Tips on P2G and P10G Models
NOTE
For the P2G and P10G models, a dual-position
adapter (plastic) is required to fit DL10 tips
(longtips) or D10 tips (short tips). The metallic rod
of the tip ejector is shaped so the adapter may be
clipped to it in either position.
P2G and P10G models are delivered
with the adapter in place, ready to
use DL10 tips. If D10 tips are used, the
adapter must be repositioned in the
shorter slot as follows:
1. Pull the adapter down from the
metallic rod.
2. Turn the adapter 180°.
3. Refit the adapter so the end
of the metallic rod engages the
shorter slot of the adapter.
NOTE
Plastic tip ejectors can be
used and ordered separately
(refer to PIPETMAN G User’s
Guide LT801122 ).
Figure 5
Dual-position
adapter for P2G and
P10G with stainless
steel tip ejector
Short tips Long tips

7
PIPETMAN® G |QUICK GUIDEQUICK GUIDE |PIPETMAN® G
Ejector spacer
D10
Short tipsLong tips
Ejector
spacer
Figure 6
Ejector spacer location
PIPETMAN DIAMOND Tips are
best fitted onto multichannel
pipettes from the patented
ROCKY RACK available only in
our TIPACKS and TOWERPACKS.
Figure 7
ROCKY RACK™ system
Pre-Rinse the Tips
Some liquids (e.g., protein-containing solutions and
organic solvents) can leave a film of liquid on the inside
wall of the tip. Pre-rinse the tip to minimize any errors
that may be related to this phenomenon.
Pre-rinsing consists of aspirating the first volume of
liquid and then dispensing it back into the same vessel
(or to waste). Subsequent volumes you pipette will have
levels of accuracy and precision within specifications.
Ejector Spacer for PIPETMAN G 10 µL
Multichannel Models
According to the tip used, D10 or DL10, you may have to
exchange the ejector spacer. The broadly spaced one is
for D10, and the narrowly spaced one is for DL10.
1. Remove the tip ejector, keeping both ejector locks
depressed. Pull the tip ejector down.
2. Gently press the tabs from the ejector spacer and
remove it from the tip ejector.
3. Insert the alternative
ejector spacer and click
it to the tip ejector.
4. To refit the tip ejector,
gently re-insert the tip
ejector vertically into the
rails of the ejector
support.

8QUICK GUIDE |PIPETMAN® G
Aspirate
1. Press the push button to the first stop
(this corresponds to the set volume of liquid).
2. Hold the pipette vertically and immerse the tip
in the liquid (refer to PIPETMAN G User’s Guide
LT80112 2) .
3. Release the push button slowly and smoothly (to
the top position) to aspirate the set volume of
liquid.
4. Wait one second, and then withdraw the pipette
tip from the liquid. You may wipe any droplets
away from the outside of the tip using a medical
wipe; however if you do so, take care to avoid
touching the tip’s orifice.
First stop
Second stop
Dispense
1. Place the end of the tip against the inside wall of the
recipient vessel (at an angle of 10° to 40°).
2. Press the push button slowly and smoothly to the
first stop.
3. Wait for at least one second, then press the push
button to the second stop to expel any residual
liquid from the tip. Keep the push button pressed
fully down and (while removing the pipette) draw
the tip along the inside surface of the vessel.
4. Release the push button smoothly. Eject the tip by
pressing firmly on the tip ejector button.
It is recommended to regularly verify the volume
displayed on the dial while pipetting.
NOTICE
Figure 1
Pipetting motion - aspirate and dispense
Rest position

9
PIPETMAN® G |QUICK GUIDEQUICK GUIDE |PIPETMAN® G
Maintenance
Routine maintenance will help keep your pipette in
good condition, ensuring a continued high level of
performance. Maintenance is limited to cleaning or
autoclaving the parts specified in the PIPETMAN G
User’s Guide LT801122, or to replacing the push button,
connecting nut, tip ejector, tip holder, seal, and O-ring.
NOTICE
PIPETMAN P2G and P10G should not be
disassembled. You may only replace the
push button, tip ejector, and its dual-position
adapter. With these pipettes, if the tip holder
is damaged, the piston may also be damaged.
After replacing any parts, you should verify
the performance of your pipette following the
verification procedure available on the Gilson
website (www.gilson.com). If the pipette needs
to be readjusted, please contact your local
authorized Gilson Service Center.

10 QUICK GUIDE |PIPETMAN® G
Warranty
Gilson warrants this pipette against defects in material
under normal use and service for a period of three years
for both single channel and multichannel models from
the date of purchase.
This warranty shall not apply to pipettes which are
subject to abnormal use and/or improper or inadequate
maintenance (contrary to the recommendations given in
the user’s guide), including, but not limited to pipettes
that have been subjected to physical damage, improper
handling, or spillage or exposure to any corrosive
environment. This warranty shall also be void in the
event pipettes are altered or modified by any party
other than Gilson or its designates. Gilson’s sole liability
under this warranty shall be limited to, at Gilson’s
sole option, repair or replacement of any defective
components of pipettes or refund of the purchase price
paid for such pipettes. Routine cleaning, control and
recalibration are not covered under the warranty. The
replacement of wearing parts such as seals, O-rings,
broken pistons assembly, and broken tip holders are
not covered under the warranty.
NOTICE
Yearly routine maintenance is highly
recommended to keep your pipette in good
condition, ensuring a continued high level of
performance.
THE FOREGOING WARRANTY IS EXCLUSIVE
AND GILSON HEREBY DISCLAIMS ALL OTHER
WARRANTIES, WHETHER EXPRESS OR
IMPLIED, INCLUDING ANY WARRANTIES OF
MERCHANTABILITY AND ANY WARRANTIES OF
FITNESS FOR A PARTICULAR PURPOSE, UNDER
NO CIRCUMSTANCES SHALL GILSON BE LIABLE
FOR ANY CONSEQUENTIAL, PUNITIVE, INDIRECT
OR INCIDENTAL DAMAGES ARISING OUT OF ANY
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY.
Web Resources
Visit Gilson’s website at www.gilson.com for:
●Service contact information
● PIPETMAN G User’s Guide LT801122 pdf
●Information about accessories, spare parts, and
related products
●Additional product information and special offers

11
PIPETMAN® G |QUICK GUIDEQUICK GUIDE |PIPETMAN® G
NOTES

www.gilson.com/contactus
LT801624/C | ©2019 Gilson, Inc. All rights reserved.