Gima HCT-9291D User manual

PROFESSIONAL MEDICAL PRODUCTS
DEAMBULATORE IN PIEDI COMPLETAMENTE REGOLABILE -
alluminio - rosso
FULLY ADJUSTABLE STANDUP ROLLATOR - aluminium - red
DÉAMBULATEUR DEBOUT COMPLÈTEMENT RÉGLABLE -
aluminium - rouge
ANDADOR DE PIE TOTALMENTE AJUSTABLE - aluminio - rojo
Manuale di istruzioni - Instruction Manual - Mode d’emploi - Manual de instrucciones
HCT-9291D (Gima 43172)
M43166-M-Rev.0-10.22
Foshan HCT Medical Equipment Co.,
Ltd No.11,Dongyang 4th Road, Southern China Hardware Industry Base, Danzao Town,
Nanhai District, Foshan City, Guangdong Province, China
Made in China
SUNGO Europe B.V.
Olympisch Stadion 24, 1076DE Amsterdam, Netherlands
Gima S.p.A
Via Marconi, 1 - 20060 Gessate (MI) - Italy
[e-mail] - [e-mail]
www.gimaitaly.com
È necessario segnalare qualsiasi incidente grave vericatosi in relazione al dispositivo medico da noi fornito al fabbri-
cante e all'autorità competente dello Stato membro in cui si ha sede.
All serious accidents concerning the medical device supplied by us must be reported to the manufacturer and compe-
tent authority of the member state where your registered ofce is located.
Il est nécessaire de signaler tout accident grave survenu et lié au dispositif médical que nous avons livré au fabricant
et à l’autorité compétente de l’état membre où on a le siège social.
Es necesario informar al fabricante y a la autoridad competente del Estado miembro en el que se encuentra la sede
sobre cualquier incidente grave que haya ocurrido en relación con el producto sanitario que le hemos suministrado.

7ENGLISH
WARNINGS
Before carrying out any operation, visually check the integrity of the device. Where the product presents
anomalies, immediately contact the dealer from whom it was purchased. We assumes no responsibility
for the misuse of the device.
DESCRIPTION UPRIGHT WALKER
HCT-9291D upright walker features compact folding design and aluminum stable frame and fully adju-
stable armrest, aimed at helping users to stand upright and Look ahead with better support.
The Upright Walker requires assembly before use. Please follow the instructions below:
MATERIAL COMPONENTS
Frame Aluminum
Wheels PVC
Handrail Foam
Handrest Padded PU material
Seat Nylon and polyester
PREPARING FOR USE
The choice of the type of aid and the necessary settings for use must be carried out by medical and
technical staff qualied, depending on the pathology and user terms and conditions.
1. To ensure your safety in using the the upright walker, the following safety information and all instruc-
tions must be followed.
2. Check whether all wheels are tight before use.
3. Check whether the height adjustment button is rm.
4. Make sure the walker is fully deployed.Pay attention to the surrounding area when using a walker.
5. The backrest is intended to provide back support while seated. The backrest is not intended to
support full body weight. Avoid Leaning while sitting as this may result in fall.
6. The brakes MUST be in the locked position BEFORE sitting on the seat.
7. Brakes are to be used to keep the wheels from rolling. However, it may not prevent the walker from
moving if it is pushed.
8. DO NOT seLf-propel the walker while seated. Walker are intended to use as a walking aid for indi-
vidual only and are NOT TO BE USED AS A WHEELCHAIR.
9. DO NOT use the walker to walk backwards, down gradients or to climb stairs, curbs or to go over
big obstacles. Serious risk of fall or injury may occur.
10. DO NOT use the seat to transport people or Large objects.
11. DO NOT sit on the seat when the walker is on an incline.
12. DO NOT push the walker while brakes are enabled.
13. DO NOT put your hand into the folding place of the walker to avoid being pinched.
14. DO NOT Let yourself fall on the seat of the walker, but always sit slowly on the seat in a controlled
manner.

8
ENGLISH
COMPONENT
1. Handgrip
2. Backrest
3. Break wire
4. Shopping nylon bag
5. 10 inch front wheels
6. Quick-release screw
7. 8 inch rear wheels
8. Obstacle Aid Pedal
9. Brake cover
10. Cane holder
11. Joint part for folding design
12. Padded Seat
13. Push button for height adjustment
14. Foam handrail
15. Knob to adjust backrest height
16. Knob to adjust handle Length
17. Arm holder
TECHNICAL SPECIFICATIONS
Width between the handles 19.7 in
Overall width 24.6 in
Overall depth 29.5 in
Seat area 9.8*18 in
Seat height 21.6 in
Adjustable handle height 40.3-45.5in
Max. user weight 300Lb
Weight 22.4 lb
Front wheels 10in
Rear wheels 8 in

9ENGLISH
SAFETY INSTRUCTIONS
The Upright Walker requires assembly before use.
Please follow the instructions below:
1. Identify the partially assembled base piece, un-
fold it, and ensure the seat is at and Locked into
place.
2. Inserting and lock the rear wheels into position
3. Attach the 2 front wheels to the seat inserting
and Lock it into position.
4. Locate the 2 handles which comes with a
backrest and insert them into the two tubes at two
sides of the walker.Make sure it is Locked into the
position.
5. Insert the 2 hand grips into the designated slot
within the arm bars.
Choose the desired Length by Lining up the scale
number where you want the Length to be and se-
cure with the knob by screwing it tight.
6. Put handrail into the tube and Lock into the po-
sition.
7. Pull out two roll tubes at the front of the seat,
then hang the bag through the two straps of the
storage bag.

10
ENGLISH
HOW TO ADJUST ARMHOLDER
HEIGHT
There is a push button at each tube where the
handle height can be adjusted up or down by
pressing the button and snapping into place when
desired height is reached.
OPERATING THE HAND BRAKES
Pull in the hand brake to slow or stop the walker.
Push out the hand brakes until they"cLick" to lock
the walker in position.
Please attention: Brakes must be applied in the
lock position when seated.pre-check the Lock by
pushing.for- ward on the upright.
FOLDING THE UPRIGHT WALKER
To fold the upright walker, simply pull up the strap
at the middle of the seat. Then pull back forward
down the upright walker into at.
There are two screws at each sides of handle bar,
backrest height can be adjusted up or down by
Loosen the screws and tighten them when desired
height is reached.
HOW TO ADJUST THE HEIGHT
OF THE BACKREST
BRAKE ADJUSTMENT:
Turn the adjusting screw anti-clockwise to increa-
se the tension then Lock the adjustment Locking
nut clockwise whilst holding the adjuster screw
stationary.
MAINTENANCE
Over a period of time the brake cables may stretch,
and if no further adjustments can be made the
cables should be replaced. Seek the help of your
dealer when replacing brake cables. The castors
should be checked that they are secure each
time before using the walker. Also, check the bra-
kes operate correctly and the handles and hand
knobs are secure. Should any part of the walker
appear Loose or insecure discontinue use until it
is inspected by an authorized dealer.
The following shows the maintenance schedule:
WEEKLY
• Check brake for malfunction
• Check all wheels and castors for Loose bolts
and nuts
PERIODICALLY
• Check handgrips for wear
• Check frame bolts are secure
• Check front and rear axle bolts are secure
• Check tyres for wear or cracks
YEARLY
Once a year take your walker to an authorised
repai¬rer for a full check, clean, service and Lubri-
cation of all moving parts
Wheels Hand grips Brake Cables Brake Lever Be-
arings Knobs

11 ENGLISH
CLEANING
Your walker can be cleaned with a damp cloth or sponge and warm soapy water. Domestic anti-bacte-
rial surface cleaners may be used if required. Care should be taken not to leave any cleaning residues on
the handgrips or seat which may Leave them slippery when used. Do not use scouring pads or scrapers
as this may damage surface coatings.
WARNINGS!
1. Maximum working Limit 300Lb.
2. Do NOT stand on this product.
3. Ensure both push handles are adjusted to the same height.
4. Seek advice from a trained health care professional or approved Freedom Healthcare dealer for
height adjust merit of this product.
5. Always maintain a safe distance between your walker and other pedestrians or objects.
6. Some components may cause harm or damage when they come into contact with other objects.
7. Do not attempt to replace the wheels or castors of your walker. If they are faulty or require a repla-
cement please contact an authorized repairer.
8. Ensure that your walker is opened fully (folding scissor arm is straight) before using it.
9. Ensure that your ngers are clear from the scissor arm when folding.
UPRIGHT WALKER USER MANUAL
We warrant the included accessories against defects in materials and work-
manship for one year from the date of original retail purchase. We do not
warrant against damage caused by accident or abuse. If you have any ques-
tions, please contact us.
Caution: read instructions
(warnings) carefully
Medical Device compliant
with Regulation (EU)
2017/745
Product code
Manufacturer
Non-sterile
Consult
instructions for use
Keep away from sunlight Keep in a cool, dry place Medical Device
Serial number
Authorized
representative in the
European community
Date of
manufacture
Lot number Importer
GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies.