Gold's Gym VIBEMAX 580 User manual

Model No. GGVB5978.0
Serial No.
Write the serial number in the
space above for reference.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manu-
al for future reference.
USERʼS MANUA
Serial
Number
Decal
QUESTIONS?
f you have questions, or if parts
are missing, DO NOT CONTACT
THE STORE; please contact
Customer Care.
IMPORTANT: You must note the
product model number and
serial number (see the drawing
above) before contacting us:
CA TO -FREE:
1-877-776-4777
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.workoutwarehouse.com
www.workoutwarehouse.com

2
WARNING DECA P ACEMENT
TAB E OF CONTENTS
WARNNGDECALPLACEMENT ..............................................................2
MPORTANTPRECAUTONS ................................................................3
BEFOREYOUBEGN ......................................................................4
ASSEMBLY ...............................................................................5
HOWTOUSETHEVBRATONPLATFORM ....................................................7
MANTENANCE ...........................................................................9
PARTLST ..............................................................................10
EXPLODEDDRAWNG.....................................................................11
ORDERNGREPLACEMENTPARTS ..................................................BackCover
LMTEDWARRANTY ..............................................................BackCover
GOLD'S GYM is a registered trademark of Gold's Gym nternational, nc. This product is manufactured and
distributed under license from Gold's Gym nternational, nc.
This drawing shows the location(s) of the warn-
ing decal(s). If a decal is missing or illegible,
call the telephone number on the front cover
of this manual and request a free replace-
ment decal. Apply the decal in the location
shown. Note: The decal(s) may not be shown
at actual size.

3
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on the vibration platform before using the vibration
platform. ICON assumes no responsibility for personal injury or property damage sustained by or
through the use of this product.
IMPORTANT PRECAUTIONS
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or per-
sons with pre-existing health problems.
2. It is the responsibility of the owner to ensure
that all users of the vibration platform are
adequately informed of all precautions.
3. The vibration platform is intended for home
use only. Do not use the vibration platform
in a commercial, rental, or institutional set-
ting.
4. Keep the vibration platform indoors, away
from moisture and dust. Place the vibration
platform on a level surface, with a mat
beneath it to protect the floor or carpet. Do
not place the vibration platform in a garage
or covered patio, or near water.
5. Inspect and properly tighten all parts regu-
larly. Replace any worn parts immediately.
6. Keep children under age 12 and pets away
from the vibration platform at all times.
7. The vibration platform should not be used
by persons weighing more than 250 lbs.
(113 kg).
8. Never allow more than one person on the
vibration platform at a time.
9. Keep your back straight while using the
vibration platform; do not arch your back.
When standing on the vibration platform,
bend your knees slightly and balance your
weight on the balls of your feet.
10. It is recommended that you use the vibration
platform no more than 15 minutes per day
and no more than 3 times per week.
11. Be careful when stepping down from the
vibration platform; your muscles will feel
different after you exercise on the vibration
platform.
12. The following is a list of factors and condi-
tions that may make exercising on the vibra-
tion platform inadvisable (this list is not
exhaustive; it is intended only for refer-
ence). If one or more factors or conditions
apply to you, consult your physician before
using the vibration platform.
• Knee or hip implant
• Pacemaker
• Recently placed screws, pins, bolts, or
spirals
• Acute hernia, discopathy, or spondylitis
• Serious heart or vascular disease
• Acute thrombosis
• Tumor
• Serious migraine
• Epilepsy
• Serious diabetes
• Recent wound due to operation
• Fresh inflammation
• Pregnancy
13. If you feel pain or dizziness while exercis-
ing, stop immediately and cool down.
14. Use the vibration platform only as described
in this manual.
15. When connecting the power cord, no other
appliance should be on the same circuit as
the vibration platform.
16. Do not modify the power cord or use an
adapter to connect the power cord to an
improper receptacle. Keep the power cord
away from heated surfaces. Do not use an
extension cord.
17. Never leave the vibration platform unattend-
ed while it is running.
18. DANGER: Always unplug the power
cord when the vibration platform is not in
use and before cleaning the vibration plat-
form. Servicing other than the procedures in
this manual should be performed by an
authorized service representative only.

4
BEFORE YOU BEGIN
Thank you for selecting the revolutionary GOLDʼS
GYM V BEMAX 580 vibration platform. The vibration
platform offers whole body vibration options designed
to make your workouts effective and enjoyable.
For your benefit, read this manual carefully before
you use the vibration platform. f you have ques-
tions after reading this manual, please see the front
cover of this manual. To help us assist you, note the
product model number and serial number before con-
tacting us. The model number and the location of the
serial number decal are shown on the front cover of
this manual.
To avoid a registration fee for any service needed
under warranty, you must register the vibration
platform at www.workoutwarehouse.com/
registration.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Upright
Right Handlebar
Base
Hand Strap U-bolts
Mat Power Cord
Left Handlebar
Console

5
ASSEMB Y
Make sure that the power cord is unplugged. Assembly requires two persons. Set the vibration platform in
a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is com-
pleted.
Assembly requires only the included tools.
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART L ST near the end of this manual. Note: f a part is not in the hard-
ware kit, check to see if it is preattached to one of the parts to be assembled. Extra hardware may be included.
To avoid damaging plastic parts, do not use power tools for assembly.
M8 Flat Washer (33) SW8 Split Washer (34)
SW6 Split Washer (44)
M6 Flat Washer (45)
M8 x 16mm Allen Bolt (39)
M6 x 15mm Screw (38)
1. nsert the Upper Wire (47) downward into the
Upright (1).
Attach the Console (3) to the Upright (1) with
two M6 x 15mm Screws (38), two SW6 Split
Washers (44), and two M6 Flat Washers (45).
47
45
44
38
1
3
1

6
2. Tip: Be careful not to pinch the wires during
this step.
Have a second person hold the Upright (1) near
the Base (5). Connect the Upper Wire (47) to
the Lower Wire (46).
Attach the Upright (1) to the Base (5) with five
M8 x 16mm Allen Bolts (39), five SW8 Split
Washers (34), and five M8 Flat Washers (33).
2
46
47
1
39
34
33
39
39 39
34
34 34
33
33
33
39
34
33
5
Avoid pinching
the wires during
this step
3. Attach the Right Handlebar (9) to the Upright (1)
with four M8 x 16mm Allen Bolts (39), four SW8
Split Washers (34), and four M8 Flat Washers
(33).
Attach the eft Handlebar (10) in the same
way.
3
33
9
134
33
34 39
39
10
4. Make sure that all parts are properly tight-
ened before you use the vibration platform.

7
HOW TO MOVE THE VIBRATION P ATFORM
Before moving the vibration platform, make sure
that the power cord is unplugged.
Due to the size and weight of the vibration plat-
form, moving it requires two persons. While a sec-
ond person lifts the upright and the handlebars, lift the
rear of the frame and carefully move the vibration plat-
form to the desired location. Then, lower the vibration
platform to the floor. CAUTION: To reduce the risk of
injury, bend your knees and keep your back
straight. Make sure to use your legs rather than
your back to lift the vibration platform.
HOW TO TURN ON THE POWER
IMPORTANT: If the vibration platform has been
exposed to cold temperatures, allow it to warm to
room temperature before turning on the power. If
you do not do this, the console or other electronic
components may become damaged.
Plug the power cord into
the jack located on the
base of the vibration plat-
form near the upright.
Then, plug the power
cord into a 120-volt out-
let. Next, locate the on/off
switch on the vibration
platform near the power cord. Make sure that the
on/off switch is in the “on” position.
HOW TO USE THE HAND STRAPS
Some exercises on the vibration platform can be per-
formed with the hand straps. To use the hand straps,
insert the ends of the hand straps through the U-bolts
on the right and left sides of the standing platform
(see the drawing on page 4). Then, adjust the hand
straps to the desired length.
EXERCISE FORM
See the accompanying exercise chart to learn the cor-
rect form for several exercises that can be performed
on the vibration platform. When standing on the vibra-
tion platform, bend your knees slightly and balance
your weight on the balls of your feet.
FEATURES OF THE CONSO E
The easy-to-use console offers a selection of features
designed to make your workouts more effective and
enjoyable. When you select the manual mode of the
console, you can change the vibration time and fre-
quency with the touch of a button.
The console also offers four programs: Total Body,
Upper Body, Lower Body, and Abdominals. Each pro-
gram automatically changes the vibration time and fre-
quency while you perform a series of exercises
designed to target the muscles of specific areas of the
body.
HOW TO USE THE MANUA MODE
1. Select the manual mode.
Turn on the power (see HOW TO TURN ON THE
POWER at the left). Next, press the Select
Programs button repeatedly until the MANUAL
indicator lights.
2. Start a vibration session.
Press the On/Off button to start a vibration
session.
3. Select the desired vibration time and
frequency.
Press the Select Time button repeatedly to select
a vibration time of 30, 45, 60, 75, 90, 105, or 120
seconds. An indicator will light to show which
length of time you have selected.
ON / OFF
On
Position
Jack
HOW TO USE THE VIBRATION P ATFORM

8
Next, press the Select Frequency button repeated-
ly to select a vibration frequency of 20Hz, 25Hz,
30Hz, 35Hz, 40Hz, 45Hz, or 50Hz. An indicator
will light to show which vibration frequency you
have selected.
Note: When the session is about to end, a tone
will sound to alert you. When the session ends,
the vibration platform will automatically stop. To
stop the vibration session at any time, press the
On/Off button.
4. Start additional vibration sessions as desired.
Repeat steps 2 and 3 for as many additional vibra-
tion sessions as desired. IMPORTANT: It is rec-
ommended that you use the vibration platform
for no more than 15 minutes per day and no
more than 3 times per week.
When you are finished, switch the on/off
switch to the “off” position and unplug the
power cord.
HOW TO USE THE PROGRAMS
1. Select the desired program.
Turn on the power (see page 7). Next, press the
Select Programs button repeatedly to select one of
the four programs. An indicator will light to show
which program you have selected.
2. Start the program.
Press the On/Off button to start the program.
Each program
includes seven
exercises. While
you perform the
first exercise, the
lowest indicator on
the left side of the
console will light.
While you perform
the second exer-
cise, the next
higher indicator
will light, and so
forth, until the
highest indicator is lit.
The tables at the right and on page 9 show the
exercises that you will perform and the vibration
time and frequency settings for each program.
The vibration platform will automatically stop for 20
seconds after each exercise to allow you to rest.
To stop the program at any time, press the On/Off
button. When you are finished, switch the
on/off switch to the “off” position and unplug
the power cord.
Total Body Program
The Total Body program will exercise the major mus-
cles of the entire body. During the program, you will
perform the exercises shown in the table below. Make
sure to rest for 20 seconds after each exercise.
Upper Body Program
The Upper Body program will focus on exercising the
upper body muscles. During the program, you will per-
form the exercises shown in the table below. Make
sure to rest for 20 seconds after each exercise.
Exercise Time
(Seconds)
Frequency
(Hz)
1. Calves 45 35
2. Left Single Leg Squat 30 40
3. Right Single Leg Squat 30 40
4. Lateral Side Raise 45 45
5. Biceps Curl 45 45
6. Crunch Sit 30 35
7. Massage Calf 45 40
Exercise Time
(Seconds)
Frequency
(Hz)
1. Front Raise 60 45
2. Biceps Curl 30 45
3. Lateral Side Raise 45 45
4. Press Up 30 35
5. Triceps Dip 30 35
6. Bent Knee Press Up 60 45
7. Stretch Shoulder 30 50
Exercise 1
Exercise 2
Exercise 3
Exercise 4
Exercise 5
Exercise 6
Exercise 7

9
Exercise Time
(Seconds)
Frequency
(Hz)
1. Leg Calf Raise 60 35
2. Left Step-up Step-down 30 40
3. Right Step-up Step-down 30 40
4. Left Single Leg Squat 30 40
5. Right Single Leg Squat 30 40
6. Press Up 60 45
7. Stretch Groin 45 40
Exercise Time
(Seconds)
Frequency
(Hz)
1. Leg Calf Raise 60 35
2. Crunch Sit 30 35
3. Right Crunch With Twist 20 45
4. Left Crunch With Twist 15 40
5. Leg Lift 15 40
6. Scissors Kick 30 35
7. Massage Calf 60 45
Abdominals Program
The Abdominals program will focus on exercising the
abdominal muscles. During the program, you will per-
form the exercises shown in the table below. Make
sure to rest for 20 seconds after each exercise.
ower Body Program
The Lower Body program will focus on exercising the
lower body muscles. During the program, you will per-
form the exercises shown in the table below. Make
sure to rest for 20 seconds after each exercise.
Make sure that all parts are properly tightened each time you use the vibration platform. Replace any worn parts
immediately. Outer surfaces of the vibration platform can be cleaned with a damp cloth and a mild, non-abrasive
detergent; do not use solvents to clean the vibration platform.
MAINTENANCE
HOW TO REP ACE THE FUSE
f the vibration platform does not function and the con-
sole does not light when the power cord is plugged in
and the on/off switch is in the “on” position, the fuse
may need to be replaced.
IMPORTANT: To replace the fuse, first switch the
on/off switch to the “off” position and unplug the
power cord.
Next, unplug the power
cord from the jack on the
base near the upright.
Using a flat-head screw-
driver, remove the fuse
cover next to the jack.
Then, remove the fuse
from the fuse holder.
Check to see if the wire inside the fuse is intact. f the
wire is broken or faulty, discard the fuse and insert a
new fuse into the fuse holder. (Note: The correct type
of fuse to use is listed on the fuse holder.) Then,
replace the fuse cover and plug the power cord into
the jack.
Plug in the power cord, switch the on/off switch to the
“on” position, and run the vibration platform to check
for correct operation.
Fuse
Cover
Jack

10
11Upright
21Standing Platform
31 Console
41Standing Platform Plate
51Base
61Small Base Damper Mat
71Large Base Damper Mat
81Mat
91Right Handlebar
10 1 Left Handlebar
11 2 Handlebar Cover
12 1 Motor
13 3 Foot Pad
14 6 Shock Absorber
15 6 Rubber Spacer
16 1 Controller
17 1 Switching Bracket
18 1 Power Switch
19 2 Base Damper Pad
20 3 Grommet
21 2 Handlebar Cap
22 2 U-bolt
23 10 M8 x 45mm Screw
24 2 Bracket
25 4 3/8" x 50mm Carriage Bolt
26 8 U-bolt Cover
27 4 M8.2 Nylon Washer
28 4 Spring
29 4 M8 Locknut
30 4 3/8" Washer
31 4 3/8" Hex Nut
32 4 3/8" Locknut
33 17 M8 Flat Washer
34 17 SW8 Split Washer
35 4 M8 Hex Nut
36 1 Small Console Pad
37 1 Large Console Pad
38 2 M6 x 15mm Screw
39 13 M8 x 16mm Allen Bolt
40 12 M5 Flat Washer
41 12 M5 x 15mm Allen Bolt
42 12 SW5 Split Washer
43 1 Foam Pad
44 2 SW6 Split Washer
45 2 M6 Flat Washer
46 1 Lower Wire
47 1 Upper Wire
48 2 Zip Tie
49 1 Power Cord
50 11 M4 x 12mm Screw
51 4 Threaded Spacer
*–Hand Strap
*–Hex Key
*–Userʼs Manual
*–Exercise Chart
Key No. Qty. Description Key No. Qty. Description
PART IST—Model No. GGVB5978.0 R0109A
Note: Specifications are subject to change without notice. See the back cover of this manual for information about
ordering replacement parts. *These parts are not illustrated.

11
EXP ODED DRAWING—Model No. GGVB5978.0 R0109A
8
2
3
10
43
21
37
1
9
11
21
6
7
13
13
13
5
41
41
41 42
40
42
40
42
40
46
14
15 15
15
15
14 14
14
14
50
20
20
20
17 18
16
39
39
34
33
33
34
49
47
38
44
45
44
36
39
39
39
39 39
34
33
33
34
33
34
34
33
19
22
22
26
26
23
23
23
23
23
23
25
25
24
4
12
29
28
27
26
29
28
27
26
32
31
30
32
31
30
35
34
33
35
34
33
35
34
33
35
34
33
51
50
50
50
50
50
39
33
34
39
33
34
51
11
48

Part No. 276461 R0109A Printed in China © 2009 CON P, nc.
ORDERING REP ACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to
provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
•the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART L ST and the EXPLODED
DRAW NG near the end of this manual)
CON Health & Fitness, nc. ( CON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions. Parts and labor are warranted for ninety (90) days
from the date of purchase.
This warranty extends only to the original purchaser. CONʼs obligation under this warranty is limited to
repairing or replacing, at CONʼs option, the product through one of its authorized service centers. All
repairs for which warranty claims are made must be preauthorized by CON. f the product is shipped to
a service center, freight charges to and from the service center will be the customerʼs responsibility. For
replacement parts shipped while the product is under warranty, the customer will be responsible for a
minimal handling charge. For in-home service, the customer will be responsible for a minimal trip
charge. This warranty does not extend to any damage to a product caused by or attributable to freight
damage, abuse, misuse, improper or abnormal usage, or repairs not provided by an CON authorized
service center; products used for commercial or rental purposes; or products used as store display
models. No other warranty beyond that specifically set forth above is authorized by CON.
CON is not responsible or liable for indirect, special, or consequential damages arising out of or in con-
nection with the use or performance of the product; damages with respect to any economic loss, loss of
property, loss of revenues or profits, loss of enjoyment or use, or costs of removal or installation; or
other consequential damages of whatsoever nature. Some states do not allow the exclusion or limita-
tion of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties
of merchantability or fitness for a particular purpose are limited in their scope and duration to the terms
set forth herein. Some states do not allow limitations on how long an implied warranty lasts.
Accordingly, the above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights that vary from state to state.
ICON Health & Fitness, Inc., 1500 S. 1000 W., ogan, UT 84321-9813
IMITED WARRANTY