Gold's Gym WGGRKOS06 User manual

WARNING: To reduce the risk of serious injury, read the following precautions before using
the weight plate storage rack.
1. Inspect and tighten all parts often. Replace any
worn parts immediately.
2. The rack is intended for home use only. Do not
use the rack in a commercial, rental, or institu-
tional setting.
3. Use the rack only on a level surface. Place a mat
on the floor beneath the rack to protect the floor.
4. Keep children under the age of 12 and pets away
from the rack at all times.
5. The rack is designed to support a maximum of
210 pounds of weights (not included).
6. The warning decal shown at
the right has been placed on
the rack in the location
shown in assembly step 2
(see page 2). If the decal is
missing or illegible, call the
toll-free telephone number
listed above to order a free
replacement decal. Apply the
decal in the location shown in
assembly step 2.
Model WGGRKOS06
USER’S MANUAL
Weight Plate Storage Rack
Thank you for purchasing the
sturdy and durable Weight Plate
Storage Rack. The Weight Plate
Storage Rack will speed up your
workouts, provide convenient
access to your weights, and keep
your workout area organized.
For your safety and benefit,
please read this manual before
using the Weight Plate Storage
Rack. If you have questions after
reading this manual, or if you need
to order replacement parts, please
call Customer Service toll-free at
1-800-288-4802,Mon.–Fri.,
6 a.m.–6 p.m. Mountain Time
(excluding holidays).
IMPORTANT PRECAUTIONS

1. Press two 50mm Square Outer Caps (9) onto the ends
of a Support Tube (2). Attach the Support Tube to the
Base (1) with two M8 x 65mm Bolts (11), two
M8 Washers (12), and two M8 Nylon Locknuts (13). Do
not tighten the Nylon Locknuts yet.
Assemble the other Support Tube (2) in the same way.
2. Insert four M8 x 65mm Carriage Bolts (10) into the
Support Tubes (2) from underneath as shown.
Identify the Left Upright (4), which has a warning decal
near the upper end. Slide the Left Upright onto the two
M8 x 65mm Carriage Bolts (10) in the indicated Support
Tube. Slide the Right Upright (3) onto the two Carriage
Bolts in the other Support Tube. Insert the Top Cap (5)
into both Uprights.
Thread four M8 Nylon Locknuts (13) onto the
M8 x 65mm Carriage Bolts (10); do not tighten the
Nylon Locknuts yet.
3. Attach the Curl Bar Holder (6) to the Uprights (3, 4) with
three M8 x 65mm Bolts (11), three M8 Washers (12),
and three M8 Nylon Locknuts (13).
See steps 1–2. Tighten all the M8 Nylon Locknuts (13)
used in the previous steps.
2
3
2
1
9
9
2
2
1
13
13
11
12
12
10
10
10
11
43
12
12 13
6
3
4
2
1
213
13 13
5
Warning Decal
ASSEMBLY INSTRUCTIONS

1 1 Base
2 2 Support Tube
3 1 Right Upright
4 1 Left Upright
5 1 Top Cap
61 Curl Bar Holder
7 4 Weight Tube
8 4 25mm Inner Round Cap
9 4 50mm Square Outer Cap
10 4 M8 x 65mm Carriage Bolt
11 7 M8 x 65mm Bolt
12 7 M8 Washer
13 11 M8 Nylon Locknut
Specifications are subject to change without notice.
1
2
2
3
4
5
6
7
7
7
7
8
8
8
8
9
9
9
9
10
10
11
11
11
11
12
12
12
12
12
12
12
13
13
13
13
13
13
13 13
Key No. Qty. Description
4. Thread a Weight Tube (7) onto one of the four posts on
the Uprights (3, 4). Press a 25mm Round Inner Cap (8)
into the Weight Tube.
Assemble the other three Weight Tubes (7) in the same
way.
To store a barbell (not included), insert the lower end of
the barbell into the round tube on the Base (1) and rest
the barbell in the Curl Bar Holder (6). Always secure
the barbell with the indicated strap.
3
46
43
1
8
7
7
7
7
Strap Post
PART LIST / EXPLODED DRAWING—Model WGGRKOS06 R0506A

Part No. 242869 R0506A Printed in China © 2006 ICON IP, Inc.
To order replacement parts, please see the front cover of this manual. To help us assist you, please be prepared to
provide the following information:
•the MODEL NUMBER of the product (WGGRKOS06)
•the NAME of the product (GOLD’S GYM®Weight Plate Storage Rack)
•the KEY NUMBER and DESCRIPTION of the part(s) (see page 3)
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and material,
under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This warranty
extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing or repairing, at
ICON's option, the product at one of its authorized service centers. All products for which warranty claim is made
must be received by ICON at one of its authorized service centers with all freight and other transportation charges
prepaid, accompanied by sufficient proof of purchase. All returns must be pre-authorized by ICON. This warranty
does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse,
improper or abnormal usage, or repairs not provided by an ICON authorized service center, products used for com-
mercial or rental purposes, or products used as store display models. No other warranty beyond that specifically set
forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the
use or performance of the product or damages with respect to any economic loss, loss of property,loss of revenues
or profits, loss of enjoyment or use, costs of removal, installation or other consequential damages of whatsoever
nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the
above limitation may not apply to you. The warranty extended hereunder is in lieu of any and all other warranties and
any implied warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to the
terms set forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the
above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT 84321-9813
ORDERING REPLACEMENT PARTS
LIMITED WARRANTY