Goldmedal 5030 User manual

Part No. 38605
Serving Station
Instruction Manual
Model 5030
Cincinnati, OH 45241-4807 USA

Serving Station
MODEL #5030
2
Safety Precautions
DANGER
Improper installation, adjustment, alteration, service, or maintenance can
cause property damage, injury, or death. Any alterations to this equipment will
void the warranty and may cause a dangerous condition. NEVER make
alterations to this equipment. Read the Installation, Operating, and
Maintenance Instructions thoroughly before installing, servicing, or operating
this equipment.
014_051514
WARNING
ALWAYS wear safety glasses when servicing this equipment.
010_010914
WARNING
No user serviceable parts inside. Refer servicing to qualified service
personnel.
011_051514
WARNING
Read and understand operator’s manual and all other safety instructions
before using this equipment. To order copies of the operator’s manual go to
gmpopcorn.com or write to Gold Medal Products Co., 10700 Medallion Drive,
Cincinnati, OH 45241 USA 1-(800)-543-0862
022_010914
WARNING
DO NOT allow direct contact of this equipment by the public when used in
food service locations. Only personnel trained and experienced in the
equipment operation may operate this equipment.
Carefully read all instructions before operation.
012_010914
WARNING
This machine is NOT to be operated by minors.
007_010914
Note: Improvements are always being made to Gold Medal’s equipment. This information may
not be the latest available for your purposes. It is critical that
you call Gold Medal’s Technical Service Department at -800-543-0862 for any
questions about your machine operations, replacement parts, or any service questions.
(Gold Medal Products Co. does not assume any liability for injury due
to careless handling and/or reckless operation of this equipment.)

Serving Station
MODEL #5030
3
Inspection of Shipment
After unpacking, check thoroughly for any damage which may have occurred in transit. Claims
should be filed immediately with the transportation company. The warranty does not cover damage
that occurs in transit, or damage caused by abuse, or consequential damage due to the operation
of this machine, since it is beyond our control (reference warranty in back of manual).
Manual
Read and understand the operator’s manual and all other safety instructions before using this
equipment. To order copies of the operator’s manual go to gmpopcorn.com or write to Gold Medal
Products Co., 10700 Medallion Drive, Cincinnati, OH 45241 USA 1-(800)-543-0862.
Setup
This unit has been tested at the factory. Remove all packaging and tape prior to operation.

Serving Station
MODEL #5030
4
CARE AND CLEANING
Cleaning your machine daily. A clean well-kept machine is one of the best ways of advertising
your products.
Use a mild soap and damp cloth to clean the exterior of the unit.
All utensils and insert bowls should be cleaned with a sanitizing solution to help prevent
contamination from microorganisms.
Recommended cleaning procedure for main pump body.
1. Raise the pump assembly and lid out of the water tank. Operate pump to remove remainder
of cheese.
2. Place lower end of pump assembly in a bucket containing a mixture of hot water and liquid
dish detergent. Operate pump until cheese product is expelled and water flows from
discharge tube (approximately 10 pumps) “ DO NOT RECIRCULATE DIRTY WATER TO
BUCKET!”
3. Disassemble lid from pump assembly by loosening locking collar. You will now have the
plunger, pump body and lid separate. Wash lid and all exterior surfaces of pump. Remove
retaining pin from bottom of pump body to remove checkball. Use supplied tube brushes to
clean pump body and discharge tube. NOTE: So as not to lose small parts, wash them in
bucket filled with detergent water, not in a sink.
4. Push the spring stop disc toward the knob and hold plunger rod; loosen knob counter-
clockwise. Disassemble plunger assembly in order to wash all components.
5. Rinse all parts with clean hot water.
6. Using a bucket, sanitize all parts with sanitizing solution.

Serving Station
MODEL #5030
5
PUMP PLUNGER ASSEMBLY

Serving Station
MODEL #5030
6
ORDERING SPARE PARTS
1. Identify the needed part by checking it against the photos, illustrations, and/or
parts list.
2. Use only approved replacement parts when servicing this unit.
3. When ordering, please include part number, part name, and quantity needed.
4. Please include your model number, serial number, and date of manufacture (located on
the machine nameplate/data plate) with your order.
5. Address all parts orders to:
Parts Department
Gold Medal Products Co.
10700 Medallion Drive
Cincinnati, Ohio 45241-4807
Or, place orders by phone or online:
Phone: [phone]
[phone]
Fax: [phone]
[phone]
E-mail: [e-mail]
Web Page: gmpopcorn.com

Serving Station
MODEL #5030
7
PARTS LIST- PUMP ASSEMBLY
Item No.#
Part NO.#
Description
2-1 38364 Pump Weld Assembly
2-2 38238 Plunger Retainer
2-3 38600 Piston Assembly
2-4 38241 Retaining Pin
2-5 82765 “O” Ring
2-6 38250 Check Ball
2-7 38249 Plunger Spring
2-8 38250 Check Ball
2-9 38262 Knob
2-10 38263 Spring Stop
2-11 38601 Plug Assembly
2-12 38265 Retainer Cup
2-13 38280 Knob Filler Washer
2-14 87261 Washer, SAE ¼”
2-15 82766 “O” Ring
2-7

Serving Station
MODEL #5030
8
© 2014 – The text, descriptions, graphics, layout, and other material in this publication are the exclusive property of
Gold Medal Products Co. and shall not be used, copied, reproduced, or published in any fashion, including website
display, without its express written consent.
WARRANTY
Gold Medal Products Co. warrants to the original purchaser each item of its manufacture to
be free of defects in workmanship and material under normal use and service. Gold Medal
Products Co.’s obligation under this warranty is limited solely to repairing or replacing parts,
f.o.b. Cincinnati, Ohio, which in its judgment are defective in workmanship or material and
which are returned, freight prepaid, to its Cincinnati, Ohio factory or other designated point.
Except for “Perishable Parts” on specific machines, the above warranty applies for a period
of two (2) years from the date of original sale to the original purchaser of equipment when
recommended operating instructions and maintenance procedures have been followed. These
are packed with the machine. Parts warranty is two (2) years, labor is six (6) months.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR
IMPLIED, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR PART,
INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY. THERE ARE
NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE
HEREOF. In no event shall Gold Medal Products Co. be liable for special, incidental or
consequential damages. No claim under this warranty will be honored if the equipment covered
has been misused, neglected, damaged in transit, or has been tampered with or changed in any
way. No claim under this warranty shall be honored in the event that components in the unit at
the time of the claim were not supplied or approved by Gold Medal Products Co. This warranty
is effective only when electrical items have been properly attached to city utility lines only at
proper voltages. This warranty is not transferable without the written consent of Gold Medal
Products Co.
The term “Original Purchaser” as used in this warranty shall be deemed to mean that person,
firm, association, or corporation who was billed by the GOLD MEDAL PRODUCTS CO.,
or their authorized distributor for the equipment.
THIS WARRANTY HAS NO EFFECT AND IS VOID UNLESS THE ORIGINAL
PURCHASER FIRST CALLS GOLD MEDAL PRODUCTS CO. AT 1-800-543-0862 TO
DISCUSS WITH OUR SERVICE REPRESENTATIVE THE EQUIPMENT PROBLEM,
AND, IF NECESSARY, FOR INSTRUCTIONS CONCERNING THE REPAIR OR
REPLACEMENT OF PARTS.
NOTE: This equipment is manufactured and sold for commercial use only.
10700 Medallion Drive, Cincinnati, Ohio 45241
-
4807 USA
gmpopcorn.com
Phone: [phone] Fax: [phone]
[phone] [phone]