Goldmedal 9005 User manual

Part No. 12550
Hollow Extruder
Instruction Manual
Model #9005
Cincinnati, OH 45241-4807 USA
a

HOLLOW EXTRUDER
ALL MODELS #9005/9005GD
2
SAFETY PRECAUTIONS
a

HOLLOW EXTRUDER
ALL MODELS #9005/9005GD
3
CLEANING INSTRUCTIONS
1. Clean the surfaces with water and a mild detergent.
2. Remove the O-ring from the plunger in order to clean the machined
groove. The cutter is also removable for cleaning.
3. Do not allow food or foreign material to accumulate in the teeth of the rack
or jam-ups may occur.
4. Clean the container with water and mild detergents. Make sure openings
on the bottom are not plugged with hardened mix; scrub with a firm bristle
brush if necessary. Avoid rough treatment of the container.
a

HOLLOW EXTRUDER
ALL MODELS #9005/9005GD
4
MAINTENANCE INSTRUCTIONS
a

HOLLOW EXTRUDER
ALL MODELS #9005/9005GD
5
ORDERING SPARE PARTS
1. Identify the worn or broken part by checking it with the illustrations and parts list.
2. When ordering parts, include part number, part name, and quantity required.
3. Include you model name and machine serial number (found on nameplate) with your order.
4. Address orders to:
Parts Department
Gold Medal Products Co.
10700 Medallion Drive
Cincinnati, Ohio 45241-4807
or, place orders at:
[phone]
[phone]
Fax: [phone]
E-mail: [email protected]
www.gmpopcorn.com
a

HOLLOW EXTRUDER
ALL MODELS #9005/9005GD
6
HOLLOW EXTRUDER MODEL #9005
a

HOLLOW EXTRUDER
ALL MODELS #9005/9005GD
7
PARTS LIST- 9005/9005GD
ITEM NO PART NO# DESCRIPTION QTY
1 12544 O Ring 2
2 12545 Cap plug 4
3 12546 Bottom plate 1
4 12547 Pusher 1
5 12548 Star extrusion 1
6 12549 Plug extrusion 1
7 12560 Holding clips 2
8 12626 Tubing 2
9 38744 Knob 2
10 47110 Knob handle 3
11 59001 Base 1
12 59006 Rack 1
13 59010 Handle 3
14 59011 Rack stop 1
15 59013 Head & column assy 1
16 59020 Legs 12-1/2 x 25-1/2 x ¾ 2
17 59034 Set screw ¼-20 x 1 1
18 59038 Set screw 5/16-18 x ¾ 2
19 59046 Pinion gear knob 1
20 59050 Pinion adapter 1
21 59053 Handle & pinion assy 1
22 82911 Feet 4
a

WARRANTY
WE WARRANT to the original purchaser the Gold Medal equipment sold by us to
be free from defects in material or workmanship under normal use and service. Our
obligation under this warranty shall be limited to the repair or replacement of any
defective part for a period of six (6) months from the date of sale to the Original
Purchaser with regard to labor and two (2) years with regard to parts and does not
cover damage to the equipment caused by accident, alteration, improper use, voltage,
abuse, or failure to follow instructions.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED
OR IMPLIED, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR
PART, INCLUDING THE IMPLIED WARRANTY OF MERCHANTIBILITY.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION
ON THE FACE HEREOF. We neither assume, nor authorize any other person
to assume for us, any other obligation or liability in connection with the sale of said
GOLD MEDAL equipment or any part thereof.
The term “Original Purchaser” as used in this warranty shall be deemed to mean that
person, firm, association, or corporation who was billed by the GOLD MEDAL
PRODUCTS COMPANY, or their authorized distributor for the equipment.
THIS WARRANTY HAS NO EFFECT AND IS VOID UNLESS THE ORIGINAL
PURCHASER FIRST CALLS GOLD MEDAL PRODUCTS COMPANY AT 1-800-
543-0862 TO DISCUSS WITH OUR SERVICE REPRESENTATIVE THE
EQUIPMENT PROBLEM, AND, IF NECESSARY, FOR INSTRUCTIONS
CONCERNING THE REPAIR OR REPLACEMENT OF PARTS.
GOLD MEDAL PRODUCTS COMPANY
10700 Medallion Drive
Cincinnati, Ohio 45241-4807 USA
www.gmpopcorn.com
Phone: [phone]
Fax: [phone]
© The text, descriptions, graphics and other material in this publication are the proprietary
and exclusive property of Gold Medal Products Company and shall not be used, copied,
reproduced, reprinted or published in any fashion, including website display, without its
express written consent.