Graco 242063 Datasheet

Instructions–Parts List
Important Safety Instructions.
Read all warnings and instructions in this manual and
manual 309098. See manual 308955 for system
installation, operation, and troubleshooting. Save all
instructions.
309099C
SKIN INJECTION HAZARD
Fluid from the vent valve, leaks, or ruptured
components can inject fluid into your body and
cause extremely serious injury, including the need
for amputation. Fluid injected into the skin might
look like just a cut, but it is a serious injury. Get
immediate surgical treatment. Fluid splashed
in the eyes or on the skin can also cause serious
injury. The equipment may be pressurized
already, or it could become pressurized by an
automatic lube cycle initiated by the Lubrication
Controller (timer). Disconnect power to the timer,
and disconnect the hydraulic supply to the pump
module to ensure that the system is
depressurized. See the pressure relief
procedure in Pump Module manual 309098.
WARNING
2
54
6
7
1
9037A
3
Hydraulic Port
1/4” npt
Pressure Relief Port
1/8” npt Lubricant Inlet/Outlet
3/4” npt (2)
Vent Port
1/4” npt
8
242063 Vent Valve
For Hydraulic Powered Single-Line Parallel Automatic Lubrication Systems
Service Parts
Use Only Genuine Graco Repair Parts
WARNING
To prevent system overpressurization, a pres-
sure relief valve 115122 must be used in con-
junction with all vent valve installations. Failure to
comply with this warning could result in serious
injury.
Item Description Qty.
1BODY, vent valve 1
2KGASKET 1
3KSEAT, valve 1
4KO–RING, fluoroelastomerr1
5KRETAINER, packing 1
6KNeedle 1
7KPiston (includes seal) 1
8CYLINDER, hydraulic (PN 195625) 1
LIncluded in Vent Valve Repair Kit 243188

2 309099
Technical Data
Vent Valve 242063
Maximum hydraulic pressure 1500 psi (10 MPa, 103 bar). . .
Maximum lubricant pressure 3800 psi (26 MPa, 262 bar). . .
Hydraulic pressure required to seal valve
with 3500 psi (24 MPa, 241 bar)
lubricant pressure 200psi (1.4 MPa, 14 bar). . . . . . . . . . . . . . .
Recommended fluids lubricant N.L.G.I. grade #1 or lighter. . .
Dimensions height: 6.25 in., width: 2.25 in.. . . . . . . . . . . . . . . .
Mounting dimensions (2) 5/16”–18unc holes spaced 1.5”. . .
Hydraulic-side wetted parts carbon steel, alum., buna–N. . . .
Fluid-side wetted parts carbon steel, fluoroelastomer. . . . . . .
Graco Standard Warranty
Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the
date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco,
Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be
defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written
recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by
faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or sub-
stitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of
Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture,
installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for
verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The
equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect
in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and
transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other
remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any
other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the
date of sale.
Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose in connection
with accessories, equipment, materials or components sold but not manufactured by Graco. These items sold, but not manufactured
by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide
purchaser with reasonable assistance in making any claim for breach of these warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment
hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract,
breach of warranty, the negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings
entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnais-
sent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires
exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les procedures concernées.
Graco Information
TO PLACE AN ORDER, contact your Graco distributor, or call one of the following numbers
to identify the distributor closest to you:
Phone: [phone], Toll Free: 1–800–533–9655, Fax: [phone]
All written and visual data contained in this document reflect the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
This manual contains English. MM 309099
Graco Headquarters: Minneapolis
International Offices: Belgium, Korea, China, Japan
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
Copyright 1999, Graco Inc. is registered to I.S. EN ISO 9001
www.graco.com
Revised 10/2008