GREAT PLAINS Turbo Max 3.0M TM User manual

Manufacturing, Inc.
www.greatplainsmfg.com
© Copyright 2018 Printed 2018-10-18 588-154M
EN
Table of Contents Index
Table of Contents Index
ORIGINAL INSTRUCTIONS
Operator Manual
Turbo Max
3.0M TM
Read the operator’s manual entirely. When you see this symbol, the
subsequent instructions and warnings are serious - follow without
exception. Your life and the lives of others depend on it!
Illustrations may show optional equipment not supplied with standard unit.
43922

Machine Identification
Record your machine details in the log below. If you replace this manual, be sure to transfer this information to the new
manual.
If you or the dealer have added options not originally ordered with the machine, or removed options that were
originally ordered, the weights and measurements are no longer accurate for your machine. Update the record by
adding the machine weight and measurements with the option(s) weight and measurements.
Dealer Contact Information
Model Number
Serial Number
Machine Height
Machine Length
Machine Width
Machine Weight
Year of Construction
Delivery Date
First Operation
Accessories
Name:
Street:
City/State:
Telephone:
Email:
Dealer’s Customer
No.:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Turbo Max Cover Index Table of Contents
Great Plains | 588-154M | 2018-10-18 Cover Index iii
© Copyright 2018 All rights Reserved
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been
taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed
for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products
as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Trademarks of Great Plains Manufacturing, Inc. include: AccuShot, Max-Chisel, Row-Pro,
Singulator Plus, Short Disk, Swath Command, Terra-Tine, Ultra-Chisel, and X-Press.
Registered Trademarks of Great Plains Manufacturing, Inc. include: Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone,
Nutri-Pro, Seed-Lok, Solid Stand, Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo-Max, Turbo-Till, Ultra-Till, Whirlfilter, and Yield-Pro.
Brand and Product Names that appear and are owned by others are trademarks of their respective owners.
Printed in the United States of America
Table of Contents
Safety Information ..................................................................1
Safety Decals ....................................................................5
Introduction.............................................................................7
Models Covered ................................................................7
Description of Unit .............................................................7
Document Family .......................................................7
Using This Manual......................................................7
Definitions...................................................................7
Owner Assistance..............................................................8
Further Assistance .....................................................8
Preparation and Setup ...........................................................9
Prior to Going to the Field Checklist..................................9
Hitching Turbo Max to Tractor.........................................10
Electrical Hookup .....................................................11
Hydraulic Hose Hookup............................................11
Transport Locks........................................................12
Pre-Leveling of Machine...........................................12
Front to Rear Leveling..............................................12
Level Bar Spring Adjustment....................................12
Hydraulic Gang Angle Adjustment ..............................13
Brake Connections (Optional)......................................14
Air Brake Connections..............................................14
Weight Package Assembly (Optional)......................14
Operating Instructions .........................................................16
Pre-Start Checklist...........................................................16
Transport .........................................................................16
Transport Steps........................................................16
Field Operation ................................................................17
Field Set-Up Checklists............................................17
Final Checklist ..........................................................17
Tillage Gang Controls......................................................18
Depth Stop Adjustment....................................................19
Setting the Rolling Harrow and Reel ........................20
Parking ............................................................................21
Storage ............................................................................21
Placing Machine Into Storage ..................................21
Removing Machine From Storage............................21
Maintenance and Lubrication ..............................................22
Maintenance ....................................................................22
Lubrication .......................................................................22
Appendix ...............................................................................23
Turbo Max Specifications and Capacities .......................23
Tire Inflation Chart ...........................................................24
Hydraulic Connectors and Torque...................................24
Torque Values Chart .......................................................25
Lighting Layout ................................................................27
Hydraulic Lift Layout........................................................28
Hydraulic Gang Angle Layout..........................................29

Great Plains | 588-154M | 2018-10-18 Table of Contents Index iv
Turbo Max Table of Contents Index

3.0M TM Table of Contents Index Safety Information
Great Plains | 588-154M | 10/18/2018 Table of Contents Index 1
Safety Information
Look for Informational Symbols
The SAFETY ALERT SYMBOL indicates there is a
potential hazard to personal safety involved and extra
safety precaution must be taken. When you see this
symbol, be alert and carefully read the message that
follows it. In addition to design and configuration of
equipment, hazard control and accident prevention are
dependent upon the awareness, concern, prudence and
proper training of personnel involved in the operation,
transport, maintenance and storage of equipment.
Indicates useful, but not crucial, information for machine
operation, assembly, or adjustment. It may also direct
you towards additional information.
Be Aware of Signal Words
Signal words designate a degree or level of hazard
seriousness. The signal words are:
DANGER indicates an imminent hazard which, if not
avoided, will result in death or serious injury. This signal
word is limited to the most extreme situations, typically
for machine components that, for functional purposes,
cannot be guarded.
WARNING indicates a potential hazard which, if not
avoided, could result in death or serious injury, and
includes hazards that are exposed when guards are
removed. It may also be used to alert against unsafe
practices.
CAUTION indicates a potential hazard which, if not
avoided, may result in minor or moderate injury. It may
also be used to alert against unsafe practices.
NOTICE indicates a potential hazard which, if not avoided,
may result in moderate to severe damage to your machine,
machine parts, or nearby property.
Be Familiar with Safety Decals
1. Throughly read and understand “Safety Decals”
section of the Operator Manual.
2. Read all instructions noted on the decals.
3. Keep decals clean. Replace damaged, faded and
illegible decals.
Wear Protective Equipment
1. Wear protective clothing and equipment appropriate
for the job, such as safety glasses, hard hat, and ear
plugs.
2. Clothing must fit snug without fringes and pull strings
to avoid entanglement with moving parts.
3. Avoid using distracting multimedia devices, such as
audio that requires headphones, tablet, or smart
phone, while operating machinery.
Use A Safety Chain
1. A safety chain will help control drawn machinery if
the machinery separates from tractor draw-bar.
2. Use a chain with a strength rating equal to or greater
than the gross weight of towed machinery.
3. Attach chain to tractor draw-bar support or other
specified anchor location. Allow only enough slack in
chain to permit turning.
4. Replace chain if any links or end fittings are broken,
stretched or damaged.
5. Do not use safety chain for towing.


Great Plains | 588-154M | 10/18/2018 Table of Contents Index 2
3.0M TM Table of Contents Index Safety Information
Avoid High Pressure Fluids
NOTE
Escaping fluid under pressure can penetrate the
skin, causing serious injury.
1. Make sure all hydraulic fluid connections are tight
and all hydraulic hoses and lines are in good
condition before applying pressure to the system.
2. Avoid the hazard by relieving pressure before
disconnecting hydraulic lines or performing any work
on the system.
3. Wear protective gloves and safety glasses or
goggles when working with hydraulic systems.
4. Escaping fluid under pressure can penetrate the skin
causing serious injury.
5. Use a piece of paper or cardboard, NOT BODY
PARTS, to check for suspected leaks.
6. DO NOT DELAY. If an accident occurs, seek
immediate medical assistance from a physician
familiar with this type of injury. Any fluid injected into
the skin or eyes must be treated within a few hours
or gangrene can result.
Tire Safety
NOTE
Tire changing can be dangerous and must be
performed by trained personnel using correct
tools and equipment.
1. When inflating tires, use a clip-on chuck and
extension hose long enough for you to stand to one
side–not in front of or over tire assembly. Use a
safety cage if available.
2. When removing and installing wheels, use wheel-
handling equipment adequate for weight involved.
Use Safety Lights and Devices
NOTE
Slow-moving tractors and towed machinery can
create a hazard when driven on public roads.
They are difficult to see, especially at night.
1. If equipped, use flashing warning lights and turn
signals whenever driving on public roads.
2. Use safety devices provided with implement.
3. Keep safety lights and signs clean and visible from
rear of the machine.
Keep Riders Off Machinery
NOTE
Riders obstruct the operator’s view. Riders could
be struck by foreign objects or thrown from the
machine.
1. Never carry riders or use machinery as a personal
lift.
2. Riders obstruct the operators view.
3. Riders can be struck by foreign objects or thrown
from the machine.
4. Never allow children to operate equipment.
5. Keep all bystanders away from machine during
operation.





3.0M TM Table of Contents Index Safety Information
Great Plains | 588-154M | 10/18/2018 Table of Contents Index 3
Transport Machinery Safely
NOTE
Maximum Transport speed for implement is
30 kph (20 mph). Some rough terrains require a
slower speed. Sudden braking can cause a
towed load to swerve and upset.
1. Comply with state and local laws.
2. Carry reflectors or flags to mark machinery in case of
breakdown on the road.
3. Keep clear of overhead power lines and other
obstructions when transporting.
4. Do not fold or unfold the implement while the tractor
is moving.
5. Do not tow an implement that, when fully loaded,
weighs more than 1.5 times the weight of towing
vehicle.
6. Turning tractor too tight can cause implement to tip
over.
7. When towing on a trailer, secure implement with tie
downs and chains.
8. When towing on a trailer, sudden braking can cause
a trailer to swerve and upset. Reduce speed if trailer
is not equipped with brakes.
Shutdown and Storage
1. Park the tractor and implement on a solid, level
surface where children normally do not play.
2. Raise the wings, put tractor in park or set park brake.
Turn off engine and remove switch key to prevent
unauthorized starting.
3. Wait for all components to come to a complete stop
before leaving the operator’s seat.
4. Turn lockout valve and wing lock levers to locked
position to prevent the wings from lowering.
5. Install transport locks to relieve pressure on
hydraulic hoses.
6. Detach the tractor. Secure the implement using
blocks and supports.
Practice Safe Maintenance
1. Understand procedure before doing work. Use
proper tools and equipment. Refer to this manual.
2. Work in a clean, dry area.
3. Lower the implement. Put tractor in Park, turn off
engine. To prevent unauthorized starting, remove
key before performing maintenance or service work.
4. If work must be performed with wings raised, turn
lockout valve and wing lock levers to the locked
position.
5. Make sure all moving parts have stopped and all
system pressure is relieved.
6. Disconnect lighting harness from the tractor before
servicing or adjusting electrical systems.
7. Welding: Disconnect lighting harness from the
tractor. Protect hydraulic lines. Avoid fumes from
heated paint.
8. Inspect all parts. Make sure parts are in good
condition and installed properly.
9. Do not alter this machine in a way which will
adversely affect its performance.
10. Remove buildup of grease, oil or debris.
11. Remove all tools and unused parts from implement
before operation.


Great Plains | 588-154M | 10/18/2018 Table of Contents Index 4
3.0M TM Table of Contents Index Safety Information
Safety At All Times
NOTE: Read Operator Manual
Thoroughly read and understand the instructions
in the operator manual before operation. Read
all instructions noted on the safety decals.
NOTE: Do Not Use Untrained Operators
Do not allow anyone to operate this equipment
who has not fully read and comprehended this
manual and who has not been properly trained in
the safe operation of the equipment.
1. The operator must not use drugs or alcohol as they
can change the alertness or coordination of that
person while operating equipment. If over-the-
counter drugs are used, seek medical advice on
whether you can safely operate equipment.
2. Operator must be familiar with all functions of the
tractor and attachments, and be able to handle
emergencies quickly.
3. Make sure all guards and shields are in place and
secured before operating the implement.
4. Keep all bystanders away from equipment and work
area.
5. Operator must start tractor and operate controls from
the driver’s seat only, never from the ground.
6. Dismounting from a moving tractor can cause
serious injury or death.
7. Be familiar with all functions of the implement.
8. Do not leave implement unattended with tractor
engine running.
9. Do not stand between the tractor and the implement
during hitching.
10. Watch out for wires, trees, etc., when folding and
raising the implement.
11. Turning tractor too tight can cause hitched
implement to ride up on wheels. This can result in
injury or equipment damage.



3.0M TM Table of Contents Index Safety Information
Great Plains | 588-154M | 10/18/2018 Table of Contents Index 5
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
Read and follow decal directions.
Keep lights in operating condition.
Keep all safety decals clean and legible.
Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
When ordering new parts or components, also request
corresponding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
848-507C
Tires Not a Step
Front side of the rear tube of center frame, facing the
front of the machine;
2 total
844-067C
Cutting of Foot
One on each side of the center frame;
2 total
844-066C
Tongue Rising
On front of hitch;
1 total
TP-69353
TP-69353
TP-69353

Great Plains | 588-154M | 10/18/2018 Table of Contents Index 6
3.0M TM Table of Contents Index Safety Information
848-516C
Danger: Electrocution Hazard
On middle of hitch;
1 total
848-513C
Danger: Crushing Hazard
On front of hitch;
1 total
858-636C
Hazard Group
On rear of hitch;
1 total
TP-69353
TP-69353
TP-69353

3.0M TM Table of Contents Index Introduction
Great Plains | 588-154M | 10/18/2018 Table of Contents Index 7
Introduction
Great Plains welcomes you to our growing family of new
product owners. The Turbo Max has been designed with care
and built by skilled workers using quality materials. Proper
setup, maintenance, and safe operating practices will help
you get years of satisfactory use from the machine.
Models Covered
Description of Unit
The 3.0M Turbo Max is a one section “vertical” tillage tool.
Working width ranges from 3 meters. The implement is
designed to cut and size residue, till soil for faster seedbed
warming, break up soil crust on hard dried fields while
eliminating compaction layers.The front and rear gangs may
be adjusted from 0-6 degree angle, depending on the
aggressiveness desired. Various finishing attachments are
also available to further smooth, redistribute residue, kill
weeds, and break clods.
Document Family
Using This Manual
This manual will familiarize you with
safety, assembly, operation,
adjustments, troubleshooting, and
maintenance. Read this manual and
follow the recommendations to help
ensure safe and efficient operation.
The information in this manual is
current at printing. Some parts may
change to assure top performance.
Definitions
The following terms are used throughout this manual.
A crucial point of information related to the
preceding topic. Read and follow the directions to
remain safe, avoid serious damage to equipment
and ensure desired field results.
Useful information related to the preceding topic.
Right-hand and left-hand as used in this
manual are determined by facing the
direction the machine will travel while in
use unless otherwise stated. An orientation
rose in some line art illustrations shows the
directions of: Up, Back, Left, Down, Front,
Right.
3.0M TM 3M (19cm) spacing
588-154Q-ENG Pre-Delivery Manual
588-154M Operator Manual (this document)
588-154P Parts Manual
L
R
Figure 1
3.0M Turbo Max
TP-69358


U
D
F
B
L
R

Great Plains | 588-154M | 10/18/2018 Table of Contents Index 8
3.0M TM Table of Contents Index Introduction
Owner Assistance
If you need customer service or repair parts, contact
a Great Plains dealer. They have trained personnel,
repair parts and equipment specially designed for
Great Plains products.
Refer to Figure 2
Your machine’s parts were specially designed and
should only be replaced with Great Plains parts.
Always use the serial and model number when
ordering parts from your Great Plains dealer. The
serial-number plate is located on the front of the left
hand side.
Record your Turbo Max model and serial number on
the back of the cover page for quick reference.
Your Great Plains dealer wants you to be satisfied
with your new machine. If you do not understand any
part of this manual or are not satisfied with the
service received, please take the following actions.
1.Discuss the matter with your dealership
service manager. Make sure they are aware of
any problems so they can assist you.
If you are still unsatisfied, seek out the owner or
general manager of the dealership.
Further Assistance
Great Plains Manufacturing, Inc. wants you to be
satisfied with your new Turbo Max. If for any reason you
do not understand any part of this manual or are
otherwise dissatisfies with the product please contact:
Great Plains Service Department
1525 E. North St.
PO Box 5060
Salina, KS 67402-5060
Or go to www.greatplainsag.com and follow the contact
information at the bottom of your screen for our service
department.

Figure 2
Serial Number Plate
43937

3.0M TM Table of Contents Index Preparation and Setup
Great Plains | 588-154M | 10/18/2018 Table of Contents Index 9
Preparation and Setup
This section helps you prepare your tractor and Turbo Max for
use, and covers tasks that need to be done seasonally, or
when the tractor/Turbo Max configuration changes.
Before using the Turbo Max in the field, you must hitch it to a
suitable tractor, inspect systems and level the Turbo Max.
Before using the Turbo Max for the first time, and periodically
thereafter, certain adjustments and calibrations are required.
Prior to Going to the Field Checklist
Complete this checklist before routine setup:
Read and understand “Important Safety
Information” on page 1.
Check that all working parts are moving freely, bolts
are tight, and cotter pins are spread.
Make sure your tractor horsepower matches the
implement you are pulling. This is important so the
implement can do the best possible job.
Clean all hydraulic couplings and connect to tractor,
see “Hydraulic Hose Hookup” on page 11.
Check again for hydraulic leaks and watch that
hoses do not get pinched in hinges, cylinders, etc.
Raise and lower the Turbo Max several times to
purge air from the hydraulic system. Again check for
hydraulic leaks and tighten or replace if necessary.
Check safety chain hookup. Make sure all warning
lights are hooked up and functioning correctly.
The hubs will come pre-greased and will not need
greased at this time.
Check that all safety decals and reflectors are
correctly located and legible. Replace if damaged.
See “Safety Decals” on page 5.
Inflate tires to pressure recommended and tighten
wheel bolts as specified. See “Tire Inflation Chart”
on page 24.
Put transport locks in place, and refold the machine
slowly. Always use the transport pins when moving
from field to field. You are now ready to go to the
field.

Great Plains | 588-154M | 10/18/2018 Table of Contents Index 10
3.0M TM Table of Contents Index Preparation and Setup
Hitching Turbo Max to Tractor
Hitch to a tractor for highway transport and field
operations. Before hitching, check the compatibility
and capability of the towing tractor:
For hillsides and steep slopes, set tractor wheels as
wide as possible for maximum stability.
1.Raise tractor three-point arms (if equipped) all
the way up to clear Turbo Max.
2.For TWO-WHEEL DRIVE and MFWD tractors,
pin drawbar in fixed center position for field and
transport. For FOUR-WHEEL DRIVE and
TRAC-DRIVE tractors, leave one hole clearance
on each side of drawbar for field position, hitch
damage may occur if pinned solid. Pin in center
position for transport to maintain maximum
steering control.
Refer to Figure 3
3.Use jack (1) to raise and lower turbo max
tongue.
4.Back tractor draw bar into alignment with hitch
(2).
5.Secure with a locking hitch pin.
6.Secure safety chain to an anchor on the
tractor.
Negative Tongue Weight Hazard:
Make certain that turbo max is securely hitched to
the tractor or leading implement before. An
unhitched turbo max can tip over backwards during if
the tongue is not secured.
Refer to Figure 4
7. Retract jack foot. Re-orient jack to storage position.
8. After hitching tractor to turbo max, store jack on
storage stub (4) on the tongue.
Load Sway Hazard:
9. Lock drawbar swing to center position to minimize any
side-to-side sway to assure proper tracking in the field,
and safe road travel. See “Transport” on page 16, for
safe transporting.
Figure 3
Jack & Hitch Clevis
42244
Crushing Hazard:
Do not stand or place any body part between turbo max
and moving tractor. You may be severely injured or killed
by being crushed between the tractor and turbo max.
Stop tractor engine and set parking brake before
attaching cables and hoses.
1
2
4
Figure 4
Jack in Storage
42262

3.0M TM Table of Contents Index Preparation and Setup
Great Plains | 588-154M | 10/18/2018 Table of Contents Index 11
Electrical Hookup
Refer to Figure 5
Make sure tractor is shut down with accessory power off
before making connections.
Connect lighting connector and any options or after market
electronics to tractor outlets.
Test the lights and signaling prior to machine movement.
See “Lighting Layout” on page 27 if you need to route the
wiring harness.
Hydraulic Hose Hookup
Great Plains hydraulic hoses are color coded to help you
hookup hoses to your tractor outlets. Hoses that go to the
same remote valve are marked with the same color.
High Pressure Fluid Hazard:
Shut down tractor before making hydraulic
connections.
Only trained personnel should work with system
hydraulics.
Escaping fluid under pressure can have sufficient pressure to
penetrate the skin causing serious injury. If an accident
occurs, seek immediate medical assistance from a physician
familiar with this type of injury.
Use paper or cardboard, NOT BODY PARTS, to check for
leaks. Wear protective gloves and safety glasses or goggles
when working with hydraulic systems.
Refer to Figure 6
To distinguish hoses on the same hydraulic circuit, refer to
hose label.
•The hose with an extended-cylinder symbol feeds a
cylinder base end.
•The hose with a retracted-cylinder symbol feeds a
cylinder rod end.
Secure hoses and cables so that they have sufficient slack for
hitch movements, but cannot get caught between moving
parts of tractor, turbo max or hitch. Failure to safely route and
secure hoses and cables could result in damage requiring
component repair/replacement, and lost field time.
Clean all hydraulic couplings and hook hoses to tractor.
Color Hydraulic Function
Black Lift (2 hoses)
Red Gang Adjustment (2 hoses) Optional
Figure 5
European Connector
68099
Figure 6
Hose Handles
31733

Great Plains | 588-154M | 10/18/2018 Table of Contents Index 12
3.0M TM Table of Contents Index Preparation and Setup
Transport Locks
Refer to Figure 7
10. Once the cylinders are connected, raise the unit
completely. If the transport locks (1) are in place on
cylinders (2), remove them at this time.
11. Store the transport locks (1) in hole of the lift
mechanism link (3).
Always use transport locks when transporting.
Pre-Leveling of Machine
Pre-leveling of machine should be done on a good level
surface.
Front to Rear Leveling
Refer to Figure 8
12. If your machine is equipped with the turnbuckle
option use the following steps to level your machine.
Lower machine so front coulter gangs are 2.5 - 5cm
off of ground. Loosen jam nut (4) with turnbuckle
wrench (5) (stored on rear pegs of hitch). Adjust the
turnbuckle (3) at the front of machine to level it front
to back. (Shorten to bring front down, extend to bring
front up).
13. When the front coulter gangs are the same distance
off the ground as the rear coulter gangs re-tighten
jam nut (1).
Level Bar Spring Adjustment
Refer to Figure 9
14. To adjust the level bar spring assembly (11) to the
preset position of 67.6cm (2658in), loosen jam nut
(7) with turnbuckle wrench (5) (stored on rear pegs
of hitch).
15. Adjust the 112nut (8) until the 67.6cm dimension is
reached between backside of spring guide (9) and
front side of level bar spring rod plate (10).
16. Re-tighten the 112jam nut (7) to secure.
2
3
1
Figure 7
Transport Locks
43925
Figure 8
Hitch Turnbuckle Adjustment
68161B
4
6
5
Figure 9
Level Bar Spring
42412
10
8
9
711

3.0M TM Table of Contents Index Preparation and Setup
Great Plains | 588-154M | 10/18/2018 Table of Contents Index 13
Hydraulic Gang Angle Adjustment
Check Gang Angle
Check gang angle adjustment annually. Always adjust the
front gangs first and then the rear.
1. With front gang cylinders (1) in the full retract
position, the gang bar (2) should be 7.5cm from font
spacer tubes (3). If gang bar is not parallel to the
frame tube (11), loosen allen screw (4) on clevis on
rod end of cylinder and shorten cylinder rod (5) by
turning cylinder rod. Re-tighten allen screw.
2. When the front gang adjusting cylinders - see
“Tillage Gang Controls” on page 18 - have been
adjusted and are in the full retract position the rear
gang bar (6) should be parallel to back frame tube.
3. If rear gang bar (6) is not parallel to back frame tube,
remove pin (7) from turnbuckle end (8). Turn clevis
to adjust gang bar length.
4. Re-install pin (7) when adjustment is made.
5. Unlock jam nuts from both ends of the gauge link (9).
Turn rod until indicator (10) - located on front of the
machine - reads 0°.
6. Re-tighten jam nuts.
3
21
11
4
5
6
7
8
0°
1°
2°
3°
4°
5°
6°
910

Great Plains | 588-154M | 10/18/2018 Table of Contents Index 14
3.0M TM Table of Contents Index Preparation and Setup
Brake Connections (Optional)
Braking Hazards
To avoid damaging the machine, make sure the
operator understands when brakes are engaged
and when they are released.
An air controlled braking (trailer braking) system is installed
on this machine. Your tractor’s trailer brake system operates
the air brakes. See your tractor’s operator manual for more
information.
Air Brake Connections
1. Locate the button for the shunt valve on the tongue
of the machine. Make sure the button is pulled all the
way out.
Braking Hazards
Do not use the machine with a “single-line” air brake system.
Transport speeds require an air brake system to be dual-line.
2. Inspect yellow and red gladhands before connecting.
Clean elastomer seal surfaces and inlet ports.
3. Connect the yellow gladhand.
4. Once yellow coded brake line is attached, connect
the red gladhand.
Pull the ring on the bottom of the air reservoir to open
drain valve. Drain any water from air reservoir. Release
the ring to close the drain valve.
Weight Package Assembly (Optional)
Refer to Figure 10
Lower machine until coulters are on ground
and pressure is off leveling system.
Up to 1 set of weights (2 weights) may be used in
positions shown.
5. Start by removing the 34x 2 Gr. 8 bolts (1) from level
bar assembly.
6. Pivot level bar (2) up so there will be clearance to set
the 750 pound weight assemblies (4) into place.
7. Pivot level bar spring assembly (3) forward.
8. Carefully lower the 750 pound weight assemblies (4)
onto center frame trusses (5).
9. Slide rear weights as far forward as possible and
install weight box stops (6) on inside of trusses as
close to weight as possible (rear weights), secure
with 12x 4132 x 514u-bolt (7), 12lo ck washers and
nuts.
10. Torque u-bolts to 85 ft-lbs.
5
5
7
1
3
4
Figure 10
Weight Package
43105
2
6

3.0M TM Table of Contents Index Preparation and Setup
Great Plains | 588-154M | 10/18/2018 Table of Contents Index 15
Refer to Figure 11
11. Pivot level bar (2) and the level bar spring assembly
(9) until holes in plates are aligned.
12. Re-install 34x 2 Gr. 8 bolts (8), secure with 34lock
washers and nuts.
13. Torque 34x 2 Gr. 8 bolts (8) to 375 ft lbs to be sure
bolts do not work loose and cause damage to
machine.
2
8
9
Figure 11
Level Bar
43106

Great Plains | 588-154M | 10/18/2018 Table of Contents Index 16
3.0M TM Table of Contents Index Operating Instructions
Operating Instructions
This section covers general operating procedures.
Experience, machine familiarity, and the following
information will lead to efficient operation and good
working habits. Always operate farm machinery with
safety in mind.
Pre-Start Checklist
Perform the following steps before transporting the 3.0M Turbo Max to the field.
Carefully read “Important Safety Information” on page 1.
Lubricate Turbo Max as indicated under “Lubrication” on page 22.
Check all tires for proper inflation, “Tire Inflation Chart” on page 24.
Check all bolts, pins, and fasteners. Torque as shown in “Torque Values Chart” on page 25.
Check Turbo Max for worn or damaged parts. Repair or replace parts before going to the field.
Check hydraulic hoses, fittings, and cylinders for leaks. Repair or replace before going to the field.
High Pressure Fluid Hazard:
Relieve pressure and shut down tractor before
connecting, disconnecting or checking
hydraulic lines. Use a piece of paper or
cardboard, NOT BODY PARTS, to check for
leaks. Wear protective gloves and safety
glasses or goggles when working with
hydraulic systems. Escaping fluid under
pressure can have sufficient pressure to
penetrate the skin causing serious injury. If an
accident occurs, seek immediate medical
assistance from a physician familiar with this
type of injury.
Perform the following steps before
transporting the Turbo-Max to the field.
Carefully read “Important Safety
Information” on page 1.
Check all tires for proper inflation, “Tire
Inflation Chart” on page 24.
Check all bolts, pins, and fasteners. Torque
as shown in “Torque Values Chart” on
page 25.
Check Turbo-Max for worn or damaged
parts. Repair or replace parts before going to
the field.
Transport
Loss of Control Hazard:
Do not tow the turbo max behind another
implement on public roads. Tow the turbo max
to the field with a separate vehicle. The leading
implement may not provide sufficient lateral
control of a trailing implement at highway
speeds. The total weight of the train can also
exceed the steering and/or braking capability of
the tractor. The resulting accident could cause
serious injury or death.
Loss of Control Hazard:
Use an adequate towing vehicle. Never tow an
implement that weighs more than 150% of the
towing vehicle (transport vehicle must weigh at
least 67% of implement). Ensure that the
towing vehicle is adequate for the task. Using
an inadequate tow vehicle is extremely unsafe,
and can result in loss of control, serious injury
and death.
Braking and Loss of Control Hazard:
Do not exceed 30 kph. Slow down on rough
roads.
Transport Steps
Know your implement weight. If tractor
capabilities are marginal, check actual weight
of implement at a scale.
1.Check that implement is securely hitched to a
sufficient tractor (page 10).
2.Always use a locking-style hitch pin sized to
match holes in hitch and draw-bar, and rated
for the load.
3.Attach safety chain to tractor with enough
slack to permit turning.
4.Verify correct operation of lights. Always have
lights on for highway operation.
5.Install transport locks (page 16).
6.Check that tires are properly inflated
(page 24).
7.Do not exceed 30 kph (20 mph). Comply with
all national, regional and local laws when
traveling on public roads.
8.Remember that the implement may be wider
than the towing vehicle. Allow safe clearance.