Green Brook T612-C Installation manual

Simplified Programming Instructions
for T612-C / T634-C
Clock Setting –
Press CLOCK’
Press DAY’ to select correct day
Press Hour+’ or Hour – to select correct hour of the day
Press Min+’ or Min- to select correct minutes.
Important Notes –
•3 x ON / OFF’s can be set for each channel. One of the following
options can be chosen for each on/off -
a. Mon to Sun
b. Mon to Fri
c. Sat and Sun
d. Any day in the wee
•The start and end time must be both set. Otherwise the timer will
ignore the settings that have been entered.
•Must ensure the same day is also set for ON and OFF time.
Programming – (Applies to each channel)
Hold down ‘PROGRAM’ and then press the desired channel button

E. sales@greenbroo .co.u
W. www.greenbroo .co.u