Grizzly H3236 User manual

MODEL H3236
SLOW SPEED KIT
For G4176
INSTRUCTIONS
4. 
PositionAB

5. PositionsAB
Figure 2
6. 



      
         
Figure 1


Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
al injury.
Figure 2.

PositionA

PositionB


To change your power feeder feed rate:
1. 
2.    

3. 
    Figure 2   
 Figure 1     

If you need help with your new item, call our Tech
Support at: [phone].

WARNING: NO PORTION OF THESE INSTRUCTIONS MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

Model H3236 Slow Speed Kit Gears:
AB

AB


AB

AB


AB

AB

Change Gear and Feed Rate Chart
Figure 1.