
12 ENGLISH
6 Simply press lightly and hold the kettle On/
Off button D upwards to see the current
temperature of the water inside the kettle B.
The current temperature appears on the touch
control panel I.
Notes
█ After your water reaches to the selected tem-
perature, if the kettle B is not taken from its
base E it will be kept 60 minutes; if the ket-
tle B is taken from its base E, the process of
keeping in the selected temperature will be
canceled. An audio warning will be heard
when your water reaches to the temperature
you selected.
█ If the kettle B is taken from its base E before
your water reaches to the temperature you se-
lected, it will keep functioning in order to reach
to the temperature you selected, and will be
kept hot during 60 minutes.
7 Simply lift kettle On/Off button D upwards
and release to cancel water boiling process.
The kettle On/Off button indicator will be
turned off when the process is canceled.
Tea brewing with delay
timing
Tea brewing with forward timing mode is a func-
tion used for brewing tea automatically at a later
time you wish.
1 Follow the steps for preparation under
“Preparing black tea” or “Preparing green
tea” according to the type of tea required.
Caution
█ Make sure that the actual time is set correctly.
Otherwise, the tea will not be ready at the time
you wish.
█ You can use tea brewing with forward timing
mode in the product to make adjustment until
after max. 24 hours as from the actual time.
█ Tea brewing with forwarding timing adjustment
is not possible for durations less than 40 min-
utes. Just brew tea in regular mode for those
duration.
OPERATION ______________________________
4 Brewing time must be flashing on the
touch control panel I when you touch
Aroma “ ” symbol.
5 Touch “- | +” symbols to adjust the time you
desired.
Note
█ You may select the brewing time within the
range of 2 to 24 minutes.
6 Press Capacity “ ” symbol to select among
the quantity options of min./med./max.
Heating water (Kettle
mode)
Note
█ You can use the appliance only to boil water.
1 Plug in the power cable to outlet.
2 Bring On/Off button to “I” position.
3 Fill in the kettle B with water up to the extent
you need.
Caution
█ Please remember to fill in the kettle B with
fresh water such that the water will not drop
down below minimum quantity and exceed
beyond the maximum quantity.
4 Lightly lift and release kettle On/Off button D
on the right-handed side of the product to start
the water boiling process.
Note
█ You will hear ‘CLICK’ sound when you lift the
kettle On/Off button D and the lamp of the
button will be illuminated.
5 Touch “- | +” symbols to determine the
water heating temperature you desired, after
activating kettle mode.
Caution
█ Temperature values can be selected between
50°C and 99°C. Temperature setting must be
readjusted when you quit kettle mode and re-
select kettle mode. If no temperature setting is
performed, the kettle boils water up to 99°C.