Hanil Supra R17 User manual
User Manual
Supra R17
High Speed Centrifuge
Supra R17
Research Only Use
UM-Supra R17(E)(Rev.1), 20210118
INDEX
1. Safety Precautions ------------------------------------------------------------ 4
1.1 Safety -4
1.2 Transport & Storage - 5
1.3 Safety label on the Device - 5
1.4 Electric safety - 5
2. Product Description ---------------------------------------------------------- 6
2.1 Structure - 6
2.2 Delivery package - 7
2.3 Technical Specications - 8
3. Installation ---------------------------------------------------------------------- 9
3.1 Packing Inspection- 9
3.2 Installation - 9
3.3 Power Connection - 11
3.4 Opening/Closing the Lid - 12
3.5 Installing/Removing the Rotor - 13
3.6 Loading Tubes- 14
4. Operation ----------------------------------------------------------------------- 15
4.1 Control Panel - 15
4.2 Setting RPM/RCF - 16
4.3 Setting Run Time - 17
4.4 Setting Temperature and Fast Cool - 18
4.5 Setting Acceleration/Deceleration - 19
4.6 Start/Stop the Centrifugation - 19
4.7 Pulse - 20
4.8 Key Loce - 21
4.9 Saving/Calling up a Program - 21
4.10 Setting Sound Pitch - 22
4.11 Setting the Repeat Count of End Alarm - 23
4.12 Emergency Lid Open - 24
5. Maintenance ------------------------------------------------------------------- 25
5.1 Care Instructions - 25
5.2 Care Instructions for Refrigerated device - 26
6. Troubleshooting -------------------------------------------------------------- 27
6.1 Check List - 27
6.2 Error Messages - 28
7. Rotor ----------------------------------------------------------------------------- 30
1. Safety Precautions
1.1 Safety
1. Safety Precautions
1.4 Electric safety
1.2 Storage & Transport
Storage
Transport
1.3 Safety label on the Device
2. Product Description
2.1 Structure
①
②
⑥
⑤
③
④
2. Product Description
2.2 Delivery Package
2. Product Description
2.3 Technical Specications
3. Installation
3.1 Packing Inspection
3.2 Installation
Installation on hard and at ground
Good ventilation
Constant temperature/humidity
Avoid any corrosive gas
Leveling
3. Installation
3.2 Installation
3. Installation
3.3 Power Connection
3. Installaion
3.4 Opening/Closing the Lid
Lid button
Display
3.5 Installing/Removing the Rotor
3. Installation
When you run a xed angle rotor, make sure that the rotor lid is tightly
closed. If you don’t close the rotor lid completely, it will be crushed.
3. Installaion
3.6 Loading Tubes
4.1 Control Panel
4. Operation
10DDD 09:59 4
RPM
4. Oeration
4.2 Setting RPM/RCF
Button
Display
4. Oeration
4.3 Setting Run Time
AT SET SPEED mode
Button
Display
ACC DEC
4.4 Setting Temperature and Fast cool
4. Operation
ButtonDisplay
4. Operation
4.6 Start / Stop the a centrifugaton
4.5 Setting Acceleration/Deceleration
Button
Button
Display
Display
4. Operation
4.7 Pulse(Short spin)
ButtonDisplay
Other manuals for Supra R17
1
Table of contents
Other Hanil Laboratory Equipment manuals
Hanil
Hanil T05R User manual
Hanil
Hanil HyperVAC HVC-2124 User manual
Hanil
Hanil Supra R30 User manual
Hanil
Hanil FLETA 40P User manual
Hanil
Hanil T04 User manual
Hanil
Hanil Component R6 User manual
Hanil
Hanil Component R12 User manual
Hanil
Hanil Fleta 5 User manual
Hanil
Hanil FLETA 4 User manual
Hanil
Hanil Fleta5 User manual
Hanil
Hanil Ultra 5.0 User manual
Hanil
Hanil Smart 15 Plus User manual
Hanil
Hanil T05R User manual
Hanil
Hanil SeroSpin II User manual
Hanil
Hanil Ultra 5.0 User manual
Hanil
Hanil M15R User manual
Hanil
Hanil Component wR User manual
Hanil
Hanil M 13 User manual
Hanil
Hanil Smart R17 User manual
Hanil
Hanil ARA Smart 6 User manual
Popular Laboratory Equipment manuals by other brands
Fluke
Fluke TiR2 user manual
Labconco
Labconco Protector XStream 11041 Series user manual
Steridose
Steridose Sterimixer-Low-Shear SMO Installation & operation manual
Labconco
Labconco RapidVap 73200 Series user manual
Termozeta
Termozeta STERIL Box instruction manual
Flexicon
Flexicon FS32 Instruction handbook
