3
PRELIMINARY EXAMINATION
Remove the instrument from the packing
material and examine it carefully to make
sure that no damage has occurred during
shipment. If noticeable damage is evident,
notify your Dealer.
Each thermometer comes supplied with a
9V battery and instruction manual.
Note: Save all packing material until you
are sure that the instrument functions
correctly. All defective items must be
returned in the original packing to-
gether with the supplied accessories.
GENERAL DESCRIPTION
HI93530, HI 93531, HI 93532, HI935005 and
HI935007 allow temperature measurement
using interchangeable K-type thermocouple
probes.
HI 93551 allows temperature measurements
with different types of thermocouples
(K-J-T). This meter is equipped with a key
that switches range from K-type to J-type or
T-type thermocouples.
HI935006 and HI935007 are specifically de-
signed for the food industry. HI935006 al-
lows temperature measurement using inter-
changeable T-type thermocouple probes.
HI935007 uses a fixed K-type penetration
temperature probe (HI 766C) with 1 m (3.3')
cable.
The non-linearity of the temperature probe
is linearized by the built-in microprocessor,
in order to achieve high degree accuracy
and resolution. It also permits accurate com-
pensation for drifts in the measurement cir-
cuit and the reference junction.
All Hanna Instruments meters are warranted
for two years against defects in workman-
ship and materials when used for their in-
tended purpose and maintained according
to instructions.
The probes are warranted for a period of
six months.
This warranty is limited to repair or replace-
ment free of charge.
Damages due to accident, misuse, tamper-
ing or lack of prescribed maintenance are
not covered.
If service is required, contact the dealer
from whom you purchased the instrument. If
under warranty, report the model number,
date of purchase, serial number and the
nature of the failure. If the repair is not
covered by the warranty, you will be notified
of the charges incurred. If the instrument is
to be returned to Hanna Instruments, first
obtain a Returned Goods Authorization Num-
ber from the Customer Service department
and then send it with shipment costs pre-
paid. When shipping any instrument, make
sure it is properly packaged for complete
protection.
To validate your warranty, fill out and return
the enclosed warranty card within 14 days
from the date of purchase.
All rights are reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
WARRANTY
Hanna Instruments reserves the right to
modify the design, construction and ap-
pearance of its products without advance
notice.
