Hantek Tablet1000 Series User manual

Tablet1000 series
Tablet oscilloscope
User Manual
2022.05

Warranties and Declarations
Copyright
The copyright of this document belongs to Qingdao Hantek Electronics Co., LTD.
Statement
Qingdao Hantek Electronics Co., Ltd. reserves the right to amend this document without prior notice.
Qingdao Hantek Electronics Co., Ltd. promises that the information provided is correct and reliable but
does not guarantee that this document is free from errors. Before using this product, please make sure
that the specifications of relevant technical documents are the latest effective version. If you use
documents or products of Qingdao Hantek Electronics Co., LTD and need products, patents or works
of third parties to cooperate with them, you shall be responsible for obtaining the consent and
authorization of the third parties. The above consent and authorization shall not be the liability of
Hantek.
Product certification
Hantek certified Tablet1000 series oscilloscope to meet China's national industry standards and has
passed the CE certification.
Contact us
If you have any questions when using the products of Qingdao Hantek Electronics Co., LTD., you can
obtain service and support through the following ways:
Email: [e-mail], supp[email protected]
Website: http://www.hantek.com

EN
Copyright © Qingdao Hantek Electronics Co., LTD Tablet1000 User manual
I
Contents
Contents.......................................................................................................................I
Figures......................................................................................................................VII
Tables........................................................................................................................IX
1Safety requirem ents.............................................................................................1
1.1 Summary of general security issues.................................................................. 1
1.2 Security terms and signs................................................................................... 2
1.3 Measurement category...................................................................................... 2
1.4 Working conditions............................................................................................ 3
1.5 Maintenance and cleaning ................................................................................ 4
1.6 Environmental Considerations........................................................................... 5
2Product features....................................................................................................6
3Document overview ..............................................................................................8
4Quick start...........................................................................................................11
4.1 General examination........................................................................................11
4.2 Appearance and dimension..............................................................................11
4.3 Preparation before use.....................................................................................12
4.3.1 Connect the power supply.............................................................................................. 12
4.3.2 Boot check...................................................................................................................... 13

EN
Tablet1000 User manualCopyright © Qingdao Hantek Electronics Co., LTD
II
4.3.3 Set the system language................................................................................................ 13
4.3.4 Functional check............................................................................................................. 13
4.3.5 Probe compensation....................................................................................................... 13
4.4 Product introduction.........................................................................................15
4.4.1 Front Panel ..................................................................................................................... 15
4.4.2 Rear Panel...................................................................................................................... 16
4.4.3 Side panel....................................................................................................................... 17
4.4.4 Main interface ................................................................................................................. 19
4.5 Touch screen gesture ......................................................................................20
4.5.1Touching......................................................................................................................... 20
4.5.2 Kneading......................................................................................................................... 20
4.5.3 Dragging ......................................................................................................................... 21
4.6 Setting parameters...........................................................................................21
5Set the horizontal system....................................................................................24
5.1 Adjust the horizontal displacement...................................................................24
5.2 Adjust the horizontal time base (time/grid)........................................................24
5.3 Pan or zoom a single collection or stopped collection ......................................25
6Set the vertical system........................................................................................26
6.1 Open or close the analog channel....................................................................26

EN
Copyright © Qingdao Hantek Electronics Co., LTD Tablet1000 User manual
III
6.2 Adjust the vertical sensitivity ............................................................................27
6.3 Adjust the vertical offset...................................................................................27
6.4 Channel coupling .............................................................................................28
6.5 20M bandwidth limit .........................................................................................28
6.6 Waveform inversion .........................................................................................29
6.7 Probe...............................................................................................................29
6.8 Amplitude unit..................................................................................................29
7Mathematical operations.....................................................................................31
7.1 Algebraic operation..........................................................................................31
7.2 FFT operation ..................................................................................................32
8Reference channel..............................................................................................35
9Trigger oscilloscope............................................................................................37
9.1 Trigger level.....................................................................................................37
9.2 Trigger data source..........................................................................................37
9.3 Trigger mode....................................................................................................38
9.4 Trigger hold-off.................................................................................................38
9.5 Trigger type......................................................................................................39
9.5.1 Edge-triggered................................................................................................................ 39
9.5.2 Pulse width trigger.......................................................................................................... 40

EN
Tablet1000 User manualCopyright © Qingdao Hantek Electronics Co., LTD
IV
9.5.3 Video trigger ................................................................................................................... 42
9.5.4 Slope trigger ................................................................................................................... 42
9.5.5 Timeout trigger................................................................................................................ 43
10 Measure..............................................................................................................45
10.1 Grid scale measurement..................................................................................45
10.2 Measurement parameters................................................................................45
10.2.1 Time parameters............................................................................................................. 46
10.2.2 Count parameters........................................................................................................... 47
10.2.3 Delay and phase parameters ......................................................................................... 48
10.2.4 Voltage parameters ........................................................................................................ 49
10.3 Cursor measurement .......................................................................................50
10.3.1 Vertical Cursor................................................................................................................ 50
10.3.2 Horizontal Cursor............................................................................................................ 51
11 Acquisition...........................................................................................................53
11.1 Acquisition mode..............................................................................................53
11.2 Average times..................................................................................................53
11.3 Display mode...................................................................................................54
11.4 Storage depth ..................................................................................................55
11.5 Interpolation methods.......................................................................................56

EN
Copyright © Qingdao Hantek Electronics Co., LTD Tablet1000 User manual
V
12 Display................................................................................................................58
12.1 Type.................................................................................................................58
12.2 Persistence......................................................................................................58
12.3 Grid..................................................................................................................59
12.4 Grid brightness.................................................................................................59
12.5 Waveform brightness .......................................................................................59
13 Save....................................................................................................................60
14 Calibration...........................................................................................................61
15 Shortcuts.............................................................................................................62
15.1 Auto setting......................................................................................................62
15.2 Default setting..................................................................................................63
16 Multimeter...........................................................................................................65
16.1 Measurement...................................................................................................66
17 Signal source......................................................................................................68
17.1 Set the output waveform type and parameters.................................................68
17.2 Set waveform modulation.................................................................................69
17.3 Set burst ..........................................................................................................69
17.4 Edit arbitrary waveform ....................................................................................70
17.5 Output arbitrary waveform................................................................................71

EN
Tablet1000 User manualCopyright © Qingdao Hantek Electronics Co., LTD
VI
18 File browse..........................................................................................................73
19 Settings...............................................................................................................75
20 Gallery.................................................................................................................78
21 Remote control....................................................................................................79
22 Fault handling .....................................................................................................81
23 Appendix.............................................................................................................82
23.1 Appendix A: Accessories..................................................................................82
23.2 Appendix B: Warranty summary.......................................................................84

EN
Copyright © Qingdao Hantek Electronics Co., LTD Tablet1000 User manual
VII
Figures
Figure 4.1 Front view...........................................................................................11
Figure 4.2 Side view........................................................................................... 12
Figure 4.3 Probe................................................................................................. 14
Figure 4.4 Probe compensation.......................................................................... 14
Figure 4.5 Adjust the probe................................................................................. 15
Figure 4.6 Front panel ........................................................................................ 15
Figure 4.7 Rear view .......................................................................................... 16
Figure 4.8 Right panel ........................................................................................ 17
Figure 4.9 Left panel........................................................................................... 17
Figure 4.10 Upper panel..................................................................................... 18
Figure 4.11 Main interface.................................................................................. 19
Figure 4.12 Touching gesture............................................................................. 20
Figure 4.13 Kneading gesture ............................................................................ 21
Figure 4.14 Dragging gesture............................................................................. 21
Figure 4.15 Character keyboard......................................................................... 22
Figure 4.16 Numeric keypad............................................................................... 23
Figure 6.1 Channel vertical menu....................................................................... 26
Figure 6.2 Waveform inversion........................................................................... 29
Figure 7.1 Math operation menu......................................................................... 31
Figure 7.2 Addition operation.............................................................................. 32
Figure 7.3 FFT operation.................................................................................... 33

EN
Tablet1000 User manualCopyright © Qingdao Hantek Electronics Co., LTD
VIII
Figure 8.1 Reference waveform ......................................................................... 36
Figure 9.1 Trigger hold-off .................................................................................. 39
Figure 9.2 Edge trigger menu............................................................................. 40
Figure 9.3 Pulse width trigger menu................................................................... 41
Figure 9.4 Video trigger menu............................................................................ 42
Figure 9.5 Slope trigger menu............................................................................ 43
Figure 9.6 Timeout trigger menu......................................................................... 44
Figure 10.1 Measurement parameters ............................................................... 45
Figure 10.2 Vertical cursor.................................................................................. 50
Figure 10.3 Horizontal cursor ............................................................................. 51
Figure 11.1 Phase difference schematic diagram............................................... 54
Figure 11.2 Scroll mode...................................................................................... 55
Figure 11.3 Schematic diagram of storage depth ............................................... 56
Figure 14.1 Calibration menu ............................................................................. 61
Figure 16.1 Multimeter........................................................................................ 65
Figure 17.1 Signal source................................................................................... 68
Figure 17.2 Arbitrary wave editor........................................................................ 70
Figure 18.1 File browse...................................................................................... 73
Figure 20.1 Gallery............................................................................................. 78

EN
Copyright © Qingdao Hantek Electronics Co., LTD Tablet1000 User manual
IX
Tables
Table 3.1 Model.................................................................................................. 10
Table 15.1 Automatic setting............................................................................... 63
Table 15.2 Automatic setting of sine waves........................................................ 63
Table 15.3 Default setting................................................................................... 64
Table 19.1 Settings............................................................................................. 75

Safety requirem ents
EN
Copyright © Qingdao Hantek Electronics Co., LTD Tablet1000 User manual
1
1 Safety requirem ents
1.1 Summary of general security issues
Read the following safety precautions carefully to avoid injury and to prevent damage to
this product or any product connected. To avoid possible dangers, please use this
product in accordance with the regulations.
⚫Only professionally authorized personnel can perform repairs.
⚫Use the right power cable.
Use the power cable approved by the country in which the product is used only.
⚫Connect and disconnect correctly.
Before connecting the probe to the circuit being measured, please connect the
probe to the oscilloscope first. Before disconnecting the probe from the oscilloscope,
please disconnect the probe and the circuit under test first.
⚫Ground the product.
To avoid electric shocks, the product is grounded through a grounding conductor of
the power cable. The grounding conductor must be connected to the ground before
connecting the input or output terminals of the product. Ensure that the product is
properly grounded.
⚫Connect the probe properly.
The ground wire of the probe is the same as the ground potential. Do not connect
the ground wire to high voltage.
⚫View all terminal rating values.
To avoid fire or excessive current, please check all rating values and signs on the
product. Please consult the product manual for details of the rating values before
connecting the product.
⚫Do not operate with the cover open.
Do not run the product with the cover or panel open.
⚫Avoid circuit exposure.
Do not touch exposed connectors and components after power is switched on.
⚫Do not operate if the product is suspected to be faulty.
If you suspect that the product has been damaged, please ask qualified
maintenance personnel to check it.

Safety requirem ents
EN
Tablet1000 User manualCopyright © Qingdao Hantek Electronics Co., LTD
2
⚫Maintain proper ventilation.
⚫Do not operate in a humid environment.
⚫Do not operate in inflammable or explosive environment.
⚫Please keep the product surface clean and dry.
Warning:
Equipment that meets Class A requirements may not provide adequate protection
for broadcast services in residential environments.
1.2 Security terms and signs
Security terms in this manual:
Warning:
Indicates that the operation may not cause immediate damage to you.
Note:
Indicates that the operation may cause damage to the product or other property.
Safety terms on products:
Warning:
Indicates a potential hazard may be caused to you if you do not perform this
operation.
Safety signs on the product:
1.3 Measurement category
Measurement category

Safety requirem ents
EN
Copyright © Qingdao Hantek Electronics Co., LTD Tablet1000 User manual
3
This instrument can be used for measurement under class I.
Warning:
This instrument is only allowed to be used in the specified measurement class.
Measurement class definition
⚫Class I refers to measurements taken on a circuit not directly connected to
the main power supply. For example, measurements made on circuits that are not
exported from a main power supply, especially from a protected (internal) main
power supply. In the latter case, the instantaneous stress will change. Therefore,
the user should understand the instantaneous capacity of the instrument.
⚫Class II refers to measurements taken on a circuit directly connected to
low-voltage instruments. For example, measurements made on household
appliances, portable tools, and similar equipment.
⚫Class III refers to measurements taken on construction equipment. For
example, measurements made on switchboards, circuit breakers, circuits (including
cables, busbars, junction boxes, switches, sockets) in fixed equipment, as well as
equipment for industrial use and certain other equipment (for example, fixed motors
permanently connected to fixed instruments).
⚫Class IV refers to measurements taken at the source of low-voltage
equipment. For example, measurements made on electricity meters, primary
overcurrent protection equipment, and pulse control units.
1.4 Working conditions
The temperature
Operating temperature: 0°C -50°C
Storage temperature: -20°C -70°C
Humidity
≤+104℉(≤+40°C): Rh≤90%
106℉to 122℉(+41°C to 50°C ): Humidity≤60%
Warning:
To avoid short circuit or electric shock, do not operate the device in a damp
environment.
The altitude
In and out of operation: 3,000m (10,000 ft).
Random vibration: 0.31g RMS at 50Hz to 500Hz, 10 minutes in each axial direction.
No operation: 2.46g RMS from 5Hz to 500Hz, 10 minutes in each axial direction.

Safety requirem ents
EN
Tablet1000 User manualCopyright © Qingdao Hantek Electronics Co., LTD
4
Installation (Overvoltage) Class This product is powered by a mains supply
conforming to Installation (overvoltage) Class II.
Warning:
Ensure that no overvoltage (e.g. from lightning) reaches the product. Otherwise,
the operator may be in danger of receiving electric shock.
Installation (overvoltage) class definition
Installation (overvoltage) Class I refers to the signal level applicable to the device
measurement terminals connected to the source circuit where measures have been
taken to limit the instantaneous voltage to the corresponding low level.
Installed (overvoltage) Class II refers to the local distribution level for equipment
connected to a mains (AC supply).
The degree of pollution
2 class
Definition of pollution level
⚫Pollution degree 1: no pollution, or only dry non-conductive pollution. This
pollution level has no impact. For example: clean room or air-conditioned office
environment.
⚫Pollution level 2: generally only dry non-conductive pollution occurs.
Transient conduction due to condensation may sometimes occur. For example:
general indoor environment.
⚫Pollution level 3: conductive pollution occurs, or dry non-conductive
pollution becomes conductive by condensation. For example, an outdoor
environment with a canopy.
⚫Pollution level 4: Permanent conductive pollution through conductive dust,
rain, or snow. For example: outdoor places.
Security level
Class 1 - Grounded products
1.5 Maintenance and cleaning
Maintenance:
Do not expose the LCD to direct sunlight for a long time when storing or placing the
oscilloscope.
Cleaning:
If the oscilloscope and probe are inspected frequently as required by operating

Safety requirem ents
EN
Copyright © Qingdao Hantek Electronics Co., LTD Tablet1000 User manual
5
conditions, clean the outer surface of the instrument by following the following steps:
1) Use a lint - free cloth to remove the dust outside the oscilloscope and probe. Please be
careful to avoid scratching the smooth display filter material.
2) Clean the oscilloscope with a soft cloth soaked in water. For a more thorough cleaning,
use a aqueous solution of 75% isopropyl alcohol.
Note:
In order to avoid damaging the surface of oscilloscope or probe, do not use any
corrosive reagent or chemical cleaning reagent.
Warning:
Before powering on the device again, ensure that the device is dry enough to
avoid electrical short circuit or personal injury caused by moisture.
1.6 Environmental Considerations
The following symbols indicate that the product complies with the requirements of WEEE
Directive 2002/96/EC.
Equipment recovery:
Producing the device requires the extraction and use of natural resources. Some
substances contained in the equipment may be harmful to the environment or human
health if the product is not disposed of properly. In order to avoid the release of harmful
substances into the environment and reduce the use of natural resources, it is
recommended that appropriate methods be used to recycle this product to ensure that
most of the materials can be correctly reused.

Product features
EN
Tablet1000 User manualCopyright © Qingdao Hantek Electronics Co., LTD
6
2 Product features
Product features
⚫7-inch industrial TFT-LCD, 800*480 multi-point full touch capacitive touch screen,
completely get rid of mechanical keys, better operation experience.
⚫Number of channels: 4-channel flat panel oscilloscope: 4 channels +1 AFG channel
(1KHz channel without signal source function).2-channel flat panel oscilloscope: 2
channels +1 AFG channel (1KHz channel without signal source function).
⚫Analog channel bandwidth: 250MHz Max.
⚫Maximum sampling rate: 4-channel flat panel oscilloscope: 1GSa/s single channel,
500MSa/s double channel, 250MSa/s three or four channels. 2-channel plate
oscilloscope: 250MSa/s double channel, 125MSa/s single channel.
⚫Maximum storage depth: 4-channel flat panel oscilloscope: 8Mpts (single channel),
4Mpts (double channel), 2Mpts (three or four channels). 2-channel flat panel
oscilloscope: 8Mpts (single channel), 4Mpts (double channel).
⚫Vertical sensitivity: 4-channel flat panel oscilloscope: 2mV/div ~ 10V /div.
2-channel flat plate oscilloscope: 10mV/div ~ 10V /div.
⚫Product classification: only with oscilloscope function of 7 inch flat plate oscilloscope,
with oscilloscope + multimeter function of 7 inch flat plate oscilloscope, with
oscilloscope + multimeter + signal source function of 7 inch flat plate oscilloscope.
⚫Basic trigger functions: edge, pulse width, video, slope, timeout.
⚫Up to 42 waveform parameters are automatically measured.
⚫Various mathematical operations: addition, subtraction, multiplication, division, FFT.
⚫Standard port: USB port.
⚫Standard 9V2A/5V3A/12v1.5A charger, data line interface input, and mobile phone
can share a set of charging equipment.
⚫4 channel flat panel oscilloscope: built-in 10000mAh removable lithium battery;2
channel flat panel oscilloscope: built-in 5000mAh removable lithium battery.
⚫With the design of supporting foot, it can be used and put to save working space.
⚫Quick storage function, one key to save waveform to U disk or internal storage,
convenient and fast.
⚫New man-machine touch interactive experience, simple and clear UI, without
complex operation, everyone can easily use the professional instrument.
⚫The 7 "large screen display is the same as that of the desktop, which can be used as
the desktop or handheld.
⚫Large screen, small volume, the net weight of the whole machine is less than 1Kg,
and mobile phone share charger, convenient to carry on business trips.
TO1000 series of a new generation of handheld flat oscilloscopes, using 7-inch industrial
specification TFT-LCD800*480 resolution LCD screen, support multi-point capacitive
touch operation;With oscilloscope, signal source, multimeter three
functions;Oscilloscope has 4 analog channels or 2 analog channels;Its own signal
source support 25MHz standard waveform output, built-in a variety of arbitrary wave;The

Product features
EN
Copyright © Qingdao Hantek Electronics Co., LTD Tablet1000 User manual
7
multimeter has its own data recording function, which can monitor and record voltage,
current, resistance and other data changes for a long time and generate trend charts;
Standard 9V2A/5V3A/ 12v1.5Acharger, USB interface input, can share a set of charging
equipment with mobile phone; Powered by 4 or 2 18650 lithium batteries; Adopt the
design of supporting foot, as you use as you put.

Document overview
EN
Tablet1000 User manualCopyright © Qingdao Hantek Electronics Co., LTD
8
3 Document overview
This document describes how to quickly understand the front and back panels, user
interfaces, and basic operation methods of the Tablet1000 series digital oscilloscopes.
Tip:
The latest version of this manual can be downloaded at (http://www.hantek.com).
Document number:
202205
Software version:
Software upgrade may change or increase product functionalities, please pay attention
to Hantek website for the latest version.
Document format conventions:
1 Virtual keys and main interface icons
Use [name] to represent virtual keys and main interface icons. For example, [HOME] is
for , [OSC]is for .
2 Menu
Use "menu text (bold) + color" to represent a label or a menu option. For example, Basic
Settings means to click the "Basic Settings" option on the current operation interface to
enter the function configuration menu of "Basic Settings".
3 Operation steps
Use ">" to represent the next step. For example, Utility>Acquire means click Utility
label before clicking Acquire menu.
Document content conventions:
Tablet1000 series tablet oscilloscope consists of the following models. Unless otherwise
specified, this manual uses TO1254D as an example to describe the Tablet1000 series
and basic operations.
Model
Channel
Bandwidth
Sampling rate
Signal source
Multimeter
TO1112
2
110MHz
250MSa/S
-
-
TO1112C
2
110MHz
250MSa/S
-
Yes
TO1112D
2
110MHz
250MSa/S
25MHz
Yes