Herman Miller Canvas Vista UBI Installation instructions

Power Driver #2 Phillips
Bit
Tools Required
Parts Included
HermanMiller
Canvas Vista UBI Shelf Installation and
Disassembly for Recycling Instructions
How to assemble UBI Shelf
YT300
. Remove protective backing from tape on bottom side of ller.
. Align ller with shelf surface. Firmly press in place.
. Slide brackets on backdrop assembly under shelf surface.
. Secure backdrop to shelf surface with  truss head screws.
Step  Step 
1HermanMiller Installation Instructions1BN3RH rev A

2HermanMiller Installation Instructions1BN3RH rev A
. Place Shelf Assembly into desired location on chase rail.
. Turn knob right to move nut clamp into position. Continue turning
knob to tighten clamp.
Step  Disassembly and Recycling:
Materials Identication and Segregation:
Where possible, plastic components are marked with ASTM recycling
codes. Use these codes to identify material type for recycling. Non
marked components should be treated as mixed plastic. Ferrous metals
can be identied using a small magnet for recycling. Non-ferrous metals
should be separated and recycled separately.
To disassemble product, reverse the above installation steps:
For more information about our products and services please visit us at
hermanmiller.com or call ()  .
© Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. BNRH A