Harbor Breeze JP18EB3 User manual

Harbor Breeze® is a registered trademark
of LF, LLC. All Rights Reserved.
ITEM #0275422
MODEL #JP18EB3
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. -
5 p.m., EST, Friday.
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
XXXXXXX
1Lowes.com/harborbreeze
Español p. 15
OSCILLATING WALL FAN
E192641
LISTED
For
Damp Location
Off
On

READ AND SAVE THESE INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, install or operate the
product.
TABLE OF CONTENTS
2
Lowes.com/harborbreeze
SAFETY INFORMATION
• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for
repairs, it must be shipped in its original packaging to ensure proper protection against damage that
might exceed the initial cause for return.
• Make sure all electrical connections comply with local codes, ordinances, the National Electrical
Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself wiring
handbook if you are unfamiliar with installing electrical wiring.
• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to
the floor.
• After you install the fan, make sure that all connections are secure to prevent the fan from falling.
• The net weight of this fan is: 16.39 lbs.
Safety Information ...............................................................................................................2
Package Contents ...............................................................................................................4
Hardware Contents .............................................................................................................5
Preparation ..........................................................................................................................5
Assembly Instructions .........................................................................................................6
Operating Instructions ......................................................................................................11
Care and Maintenance ......................................................................................................12
Troubleshooting .................................................................................................................13
Limited Lifetime Warranty ..................................................................................................13
Replacement Parts List .....................................................................................................14

SAFETY INFORMATION
3
Lowes.com/harborbreeze
To reduce the risk of fire, electrical shock or personal injury, use the metal wall
mounting bracket provided with the fan. Secure the wall mounting bracket directly to the
building structure on a wood stud or wood post or beam. Do not install directly to drywall.
The wood stud or wood post and its support must be able to support the moving weight of the fan
(at least 50 lbs.). The stud or wood beam must be supported directly by the building structure. Do
NOT use any other wall mounting bracket other than the one provided.
To avoid personal injury, the use of gloves may be necessary while handling fan parts with
sharp edges.
To reduce the risk of fire or electrical shock, do not use the fan with any solid state speed
control device or control fan speed with a full range dimmer switch.
To reduce the risk of personal injury or electrical shock, the fan should be installed where it will be
out of reach of children. The fan is NOT a toy -- DO NOT play with the fan or allow anyone else to
play with the fan.
To reduce the risk of personal injury or electrical shock, do not operate the fan if the cord or plug
has been damaged.
To reduce the risk of fire, avoid the use of an extension cord. If an extension cord is used, it must
be UL- or ETL-listed; NEVER use more than one extension cord to operate the fan.
To reduce the risk of personal injury, use only parts provided with this fan. The use of parts
OTHER than those provided with this fan will void the warranty.
WARNING
CAUTION
Before proceeding, be sure to shut off electricity at main switch or circuit breaker in order to avoid
electrical shock.
Read all instructions and safety information before installing your new fan. Review the
accompanying assembly diagrams.
Due to the bulkiness of the fan assembly, it is advisable to seek the help of another person in order
to install the fan asembly in the safest, most efficient manner.
DANGER
If using this fan in a DAMP location, this fan must be connected to a supply circuit that is protected
by a Ground Fault Circuit Interrupter (GFCI) to reduce the risk of personal injury, electrical shock
or death.

PACKAGE CONTENTS
A
E
D
B
C
IMPORTANT REMINDER: You must use the
parts provided with this fan for proper installation
and safety.
A Fan Assembly 1
B Wall Mounting Bracket 1
C Front Cage 1
D Blade Assembly 1
E Back Cage 1
F Blade Assembly Nut 1
(preassembled)
G Set Screw 1
(preassembled)
H Fuse 1
(preassembled)
DESCRIPTIONPART QUANTITY
4
Lowes.com/harborbreeze
F
G
H

5
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 90 minutes
Tools Required for Assembly (not included): Phillips Screwdriver, Drill, Drill Bit, Stud Finder, Flathead
Screwdriver, Pliers, Wrench, Safety Glasses, Tape Measure and Stepladder
Helpful Tools (not included): Level, Pencil, Do-It-Yourself and Wiring Handbook
DANGER: Make sure the wall mounting bracket is securely attached to the building structure and
can support the full weight of the fan. Failure to do this can result in serious injury or death.
After opening top of carton, remove mounting hardware package from foam inserts. Remove fan
assembly from packing and place on carpet or on foam to avoid damage to finish.
CAUTION: Carefully check all screws, bolts and nuts on fan assembly to ensure that they are
secured.
PREPARATION
Lowes.com/harborbreeze
Front
Cage
Screw
Qty. 8
+ 1 extra
CC
Wood
Screw
Qty. 4
+ 1 extra
Back
Cage
Screw
Qty. 4
+ 1 extra
AA BB CC
HARDWARE CONTENTS (shown actual size)
DD
Allen
Wrench
Qty. 1

6
Turn off circuit breakers and wall switch to the fan
supply line leads.
DANGER: Failure to disconnect power supply
prior to installation may result in serious injury or
death.
1.
2.
ASSEMBLY INSTRUCTIONS
ON
OFF
ON
OFF
2
1
Lowes.com/harborbreeze
7 ft
min.
This fan assembly (A) can only be mounted on an
indoor wall or on an enclosed porch or enclosed
patio wall.
To prevent personal injury and damage, ensure
that the hanging location allows the fan assembly
(A) a clearance of 7 ft. from the floor to prevent
accidental contact with the blade.
CAUTION: If you are going to attach the fan
assembly (A) to a wood stud or wood post, the
stud or wood post must be wide enough and thick
enough to sustain the wall mounting bracket (B)
and the weight of the fan assembly (A).
A
Off
On

3.
7
Lowes.com/harborbreeze
Determine the approximate position of where you
want the fan to be located on the wall. Then,
locate the stud in the wall. Position wall mounting
bracket (B) on wood stud or wood post and mark
the location of the four holes using a pencil or a
marker (not included).
WARNING: To reduce the risk of fire,
electrical shock or personal injury, use all four
mounting holes (two at the top and two at the
bottom) in wall mounting bracket (B) when
installing wall mounting bracket (B).
Wood Screw x 4
Hardware Used
AA
Stud
7 Ft.
3
AA B
Stud
4
AA B
4. Use 3/32-in. drill bit (not included) to drill pilot
holes at marked locations. Then, install wall
mounting bracket (B) to mounting surface with
wood screws (AA).
WARNING: It is very important that you use
the proper hardware when installing the wall
mounting bracket (B) as this will support the fan
assembly (A).
5. 5
A
Slots
Remove set screw (G) at bottom of fan assembly
(A). With the wall mounting bracket (B) secured to
the wall and able to support the fan assembly (A),
you are now ready to hang the fan assembly (A).
Grab the fan assembly (A) firmly with two hands.
Align the four slots in the middle of the back of the
fan assembly (A) with the four hooks on the wall
mountng bracket (B) and then pull down firmly on
fan assembly (A).
WARNING: Falure to make sure all four hooks
on the wall mounting bracket (B) have engaged
completely with the four slots in the fan assembly (A)
and that the fan assembly (A) is stable may result in
injury or death.
Hooks
B
G
ASSEMBLY INSTRUCTIONS

8
Lowes.com/harborbreeze
Align the four holes in the front of the motor on fan
assembly (A) with the four holes in the center of the
back cage (E).
7. 7
A
E
2
A
E
Install four back cage screws (CC) into each of the
four holes in the center of the back cage (E) to
secure back cage (E) to motor on fan assembly (A).
8. 8
Replace set screw (G) at bottom of fan assembly
(A). Tighten securely.
6. 6
G
CC
A
ASSEMBLY INSTRUCTIONS
Back Cage Screw x 4
Hardware Used
CC

Turn blade assembly nut (F) clockwise to remove
from shaft on fan motor. 9
F
9.
Place blade assembly (D) over motor shaft and lock
pin, making sure to align gap on the blade assembly
(D) with lock pin on motor. Using the Allen wrench
(DD), turn preassembled set screw located on the
blade assembley (D) clockwise to secure blade
assembly (D) to fan motor.
10.
CC
Allen Wrench x 1
Hardware Used
Re-attach blade assembly nut (F) into center of
blade assembly (D) and turn counterclockwise to
secure.
11.
9
Lowes.com/harborbreeze
D
F
11
Gap
Shaft
lock
Pin
DD
10
Set
Screw
Motor
D
DD
ASSEMBLY INSTRUCTIONS
Shaft

GFCI Wall
Outlet
WARNING: The power cord is equipped with
a three-prong grounded plug that must be
inserted into a matching receptacle. Under no
circumstances must the grounding prong be cut
off the plug. Where a two-prong wall receptacle is
encountered, it must be replaced with a properly
grounded three-prong receptacle installed in
accordance with the National Electrical Code and
all applicable local codes and ordinances.This
work must be done only by a qualified electrician,
using copper wire only. Plug
Insert the power cord preassembled on fan
assembly (A) into proper wall outlet.
WARNING: If using this fan in a DAMP
location, this fan must be connected to a supply
circuit that is protected by a Ground Fault Circuit
Interrupter (GFCI) to reduce the risk of personal
injury, electrical shock or death.
C
12
Hook
BB
E
Place hook at top of front cage (C) over edge at top
of back cage (E). Note: Make sure hook engages
with verticle rib and all front and back cage holes
match up; this will allow the front cage (C) and the
back cage (E) to hang together while you put the
front cage screw (BB) into the the front and back
cage holes.
Partially insert one front cage screw (BB) into the
hole in center at top of front cage (C), then partially
insert the rest of the front cage screws (BB). Tighten
front cage screws (BB) by alternating from one side
of front cage (C) to the other until all front cage
screws (BB) are completely secured.
12.
BB Front Cage Screw x 8
Hardware Used
A
Off
On
10
Lowes.com/harborbreeze
BB
ASSEMBLY INSTRUCTIONS
13. 13