Harbor Breeze AERO 00980 User manual

Serial Number Purchase Date
1
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. – 6 p.m., EST, Monday - Thursday,
8 a.m. – 5 p.m., EST, Friday.
ATTACH YOUR RECEIPT HERE
ITEM #0451794
MODEL #00980
Español p. 20
AERO CEILING FAN
Harbor Breeze ® is a registered trademark of LF,
LLC. All Rights Reserved.
UL MODEL #AER42
Lowes.com/harborbreeze
38
PIEZA DESCRIPCIÓN PIEZA #
E Abrazadera del aspa 104000-0319ZW
F Aspa 108001-6040ZW
K Pantalla de vidrio 990704-0520FI
LISTA DE PIEZAS DE REPUESTO
Impreso en China
Para obtener piezas de repuesto, llame a nuestro Departamento de Servicio al Cliente al 1-800-643-
0067, de lunes a jueves de 8 a.m. a 6 p.m., y los viernes de 8 a.m. a 5 p.m., hora estándar del Este.
El fabricante garantiza que este ventilador no presenta defectos de fabricación ni en los materiales
presentes en el momento del transporte desde la fábrica, durante un período limitado de por vida a
partir de la fecha de compra. Esta garantía es válida sólo para el comprador original. El fabricante
acepta reparar dichos defectos sin cargo o, según nuestro criterio, reemplazar el ventilador de techo
por un modelo comparable o superior. Para obtener el servicio de garantía, presente una copia
del recibo de venta como prueba de la adquisición. Todos los costos de extracción y reinstalación
son responsabilidad explícita del comprador. Los daños en el ventilador de techo producidos por
accidentes, uso indebido o instalación incorrecta, o a causa de la colocación de accesorios de
fabricante no asume ningún tipo de responsabilidad por la instalación del ventilador durante la
garantía limitada de por vida. Cualquier servicio realizado por una persona no autorizada invalidará
la garantía. Debido a las cambiantes condiciones climáticas, esta garantía no cubre cambios en
el acabado de latón, óxido, picaduras, deslustre, corrosión o descascarado. Los ventiladores con
acabado de latón mantienen su belleza cuando se les protege de las cambiantes condiciones
climáticas. La garantía no cubre los elementos de vidrio incluidos con este ventilador. El reemplazo
de piezas defectuosas para el ventilador de techo debe informarse dentro del primer año a partir de
la fecha de compra. Para conocer el saldo de la garantía, llame a nuestro Departamento de Servicio
al Cliente al 1-800-643-0067 para obtener la autorización para la devolución y las instrucciones de
envío, de modo que podamos reparar o reemplazar el ventilador de techo. Un ventilador o piezas
devueltas con un embalaje incorrecto son de responsabilidad única del comprador. No existe otro
tipo de garantía explícita. El fabricante rechaza cualquiera y todas las garantías implícitas. La
duración de cualquier garantía implícita que no pueda rechazarse se limita al período limitado de por
resultantes o especiales que surjan en relación con el uso o el funcionamiento del producto, excepto
también otros derechos que varían según el estado. Esta garantía sustituye cualquier garantía
previa. Nota: Es normal que el ventilador se tambalee un poco, por lo cual no se debe considerar
como un defecto.
GARANTÍA
E
FK
Harbor Breeze®es una marca
registrada de LF, LLC. Todos los
derechos reservados.
Lowes.com/harborbreeze EB 14189

2
TABLE OF CONTENTS
3
SAFETY INFORMATION
READ AND SAVE THESE INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, operate, or install
the product.
• When using an existing outlet box, be sure the box is securely attached to the building structure
and can support the full weight of the fan, so as to avoid potential serious injury or death.
• All wiring must be in accordance with the National Electrical Code “ANSI/NFPA 70-1999”
and local electrical codes. Electrical installation should be performed by a qualied licensed
electrician.
• DO NOT use bulbs with a wattage greater than the maximum value stated on the xture and in
this manual. Using a higher wattage bulb than specied will increase xture temperature and
cause risk of re.
• Disconnect the electrical supply circuit to the fan before installing light kit.
• Electrical diagrams are for reference only.
• Using a full range dimmer switch to control fan speed will cause a loud, humming noise from fan.
To reduce the risk of re or electric shock, DO NOT use a full range dimmer switch to control.
• The net weight of this fan including the light kit is: 12.32 lbs.
WARNING
• ELECTRIC SHOCK HAZARD - To reduce the risk of electric shock, do not use this fan with any
solid-state speed control device.
• ELECTRIC SHOCK HAZARD - To reduce the risk of electric shock, make sure electricity has
been turned off at the circuit breaker or fuse box before beginning installation.
• PERSONAL INJURY HAZARD - To reduce the risk of injury to persons, install fan so that the
blade is at least 7 ft. above the oor.
• FIRE, ELECTRIC SHOCK OR PERSONAL INJURY HAZARD - To reduce the risk of re,
electric shock, or personal injury, mount to outlet box marked “ACCEPTABLE FOR FAN
SUPPORT OF 35.1 lbs OR LESS” and use mounting screws provided with the outlet box. Most
outlet boxes commonly used for the support of lighting xtures are not acceptable for fan support
and may need to be replaced. Consult a qualied electrician if in doubt.
CAUTION
• PERSONAL INJURY HAZARD - Reduce the risk of personal injury, do not bend the blade
brackets when installing the brackets, balancing the blades, or cleaning the fan. DO NOT insert
foreign objects in between rotating fan blades.
Safety Information................................................................................................................... 3
Package Contents................................................................................................................... 4
Hardware Contents..................................................................................................................5
Preparation..............................................................................................................................5
Initial Installation......................................................................................................................6
Downrod-Style Mounting.........................................................................................................7
Closemount-Style Mounting....................................................................................................8
Wiring........................................................................................................................................9
Final Installation.....................................................................................................................10
Operation Instructions ......................................................................................................... 17
Care and Maintenance ....................................................................................................... 18
Troubleshooting................................................................................................................... 18
Warranty........................................................................................................................................19
Replacement Parts List..........................................................................................................19
Lowes.com/harborbreeze
Lowes.com/harborbreeze

5
HARDWARE CONTENTS (shown actual size)
Blade Bracket
Screw with
Washer
Qty. 8
Wire
Connector
Qty. 4
AA BB CC DD
K
4
PACKAGE CONTENTS
K
F
A
I
H
G
D
C
B
EJ
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 45 minutes
Tools Required for Assembly (not included): Phillips screwdriver, step ladder, electrical tape, pliers,
wire cutters, wire strippers.
PREPARATION
L
N
Fan Pull Chain
Extension
Qty. 1
(NOT TO SCALE)
Light Pull Chain
Extension
Qty. 1
(NOT TO SCALE)
EE FF GG
Blade Screw
Qty. 13 Rubber Gasket
Qty. 1
(NOT TO SCALE)
M
HH
Plastic Plug
Qty. 1
Lowes.com/harborbreeze
Coupler Screw
Qty. 3
PART DESCRIPTION QUANTITY
A Mounting Bracket (preassembled to Canopy (B)) 1
B Canopy 1
C Canopy Cover (preassembled to Canopy (B)) 1
D Downrod 1
E Blade Bracket 4
F Blade 4
G Motor Housing Assembly 1
H Switch Housing Cover (preassembled to Motor Housing Assembly (G)) 1
I Switch Housing 1
J Light kit (preassembled to Switch Housing (I)) 1
K Glass Bowl 1
L Bulb 2
M Bowl Cap (preassembled to Light Kit (J)) 1
N Finial (preassembled to Light Kit (J)) 1
Lowes.com/harborbreeze
with Washer

6 7
INITIAL INSTALLATION
IMPORTANT: If angle mounting, make sure open end of
mounting bracket (A) is installed facing the ceiling.
Depending on the mounting method (A or B)
chosen in Step 1, either proceed to page 7 for
“DOWNROD-STYLE MOUNTING” or proceed to
page 8 for “CLOSEMOUNT-STYLE MOUNTING.”
DOWNROD-STYLE MOUNTING
1. Determine mounting method.
A-Downrod Mount (standard or angled ceiling)
B-Closemount (standard ceiling only)
IMPORTANT: If angle mounting, check to make
sure the ceiling angle is not steeper than 20°.
3. Install mounting bracket (A) to outlet box (not included)
by sliding mounting bracket (A) over the two outlet box
screws (not included). Securely tighten two outlet box
screws.
2. Remove two non-slotted screws on canopy (B) and
save, then loosen the two slotted screws. Remove
mounting bracket (A) from canopy (B).
11
2
2. Insert downrod (D) through canopy (B) and canopy
cover (C). Thread wires from motor housing
assembly (G) through downrod (D).
1. Remove preassembled pin and clip from
downrod (E). Save for later use.
2
A
Outlet box
Clip
Pin
E
CD
B
Loosen but do
not remove
Remove
and save
A
B
3
3. Loosen preassembled set screws from the yoke on
motor housing assembly (G). Slip downrod (D) into yoke,
aligning holes on both parts. Insert previously removed
pin through holes on yoke and downrod (D), then insert
previously removed clip into the pin until it snaps into
place. Tighten set screws.
Set screw
D
G
Clip
Pin
3
Lowes.com/harborbreeze
Lowes.com/harborbreeze
A
B

8 9
DOWNROD-STYLE MOUNTING CLOSEMOUNT-STYLE MOUNTING
CLOSEMOUNT-STYLE MOUNTING
4. Install hanger ball on the top of downrod (E) into mounting
bracket (A) opening. Rotate fan until slot on hanger ball
engages the tab on the mounting bracket (A).
WARNING: Be careful when aligning the tab to the
slot. If not fully engaged, the fan could fall, which could
result in serious injury or death.
Proceed to the WIRING section on page 9.
1. Remove canopy cover (C) from bottom of canopy (B).
5
1
E
A
Slot
Tab
B
C
4. Hang fan on mounting bracket (A) hook using one of
the non-slotted holes on canopy (B). 4
B
A
Hook
WIRING
Lowes.com/harborbreeze Lowes.com/harborbreeze
3. Align mounting holes on canopy (B) with holes on motor
housing assembly (G) and fasten using three coupler
screws (EE). Securely tighten screws.
3
EE Coupler Screw with Washer x 3 HH
G
BEE
Coupler
Hardware Used
2. Place rubber gasket (HH) into the coupler on motor
housing assembly (G). Pull wires through hole in
canopy (B) and attach canopy (B) to coupler.
2
HH
B
G
Hardware Used
Rubber Gasket x 1
HH
1. Connect the BLACK and BLUE wires from fan to
BLACK wire from ceiling. Connect WHITE wire
from the fan to WHITE wire from ceiling. Connect
all GROUNDED (GREEN) wires together from fan
to GREEN wire from ceiling.
Note: Back wire is hot power for fan. Blue wire is
hot power for light kit. White wire is common for fan
and light kit. Green wire is grounded wire.
If house wires are different colors than referred to
ablove, stop immediately. We recommended a
professional electrician determine proper wiring.
1
Grounded/Green
Black
White
Grounded/
Green
Black
Blue
White
outlet box
blue
black
white
green white
GREEN/
black
Supply circuit
speed
switch
GROUNDED

10 11
WIRING
FINAL INSTALLATION
If you chose “DOWNROD-STYLE MOUNTING,” continue to Step 1. Proceed to Steps 2-3 if you
chose “CLOSEMOUNT-STYLE MOUNTING.”
2. Remove fan from mounting bracket (A) hook. Align
locking slots of canopy (B) with two screws on mounting
bracket (A). Push up to engage the slots, then turn
clockwise to lock in place. Securely tighten two screws.
2Outlet box Screw
Hook
Locking
slots
A
B
FINAL INSTALLATION
3. Install two non-slotted screws previously removed
(Step 2, page 6) to canopy (B) and tighten securely. 3Screw
Outlet box
1. Align locking slots of canopy (B) with preassembled
screws on the mounting bracket (A). Push up to engage
the slots, then turn clockwise to lock in place. Securely
tighten screws. Install two non-slotted screws previously
removed (Step 2, page 6) to canopy (B) and tighten
securely.
Proceed to Step 4 (page 11).
1Outlet box Screw
B
4. Attach blade (F) to blade bracket (E) using three blade
screws (FF). Securely tighten blade screws (FF).
Repeat for remaining blades (F), blade brackets (E)
and blade screws (FF). F
FF
E
Hardware Used
Blade Screw x 13
FF
4
Lowes.com/harborbreeze
Lowes.com/harborbreeze
2. Twist wire ends together and screw wire connectors (AA)
on in a clockwise direction. Tape wire connectors (AA)
and wires together.
Note: Wires should be spread apart with grounded
conductor and equipment-grounding conductor on one
side of outlet box and ungrounded conductor on other
side. After making connections, make sure bare wire
or wire strands are NOT visible. Place green and white
connections on opposite side of box from black and
blue connections. Splices should be turned upward and
pushed carefully up into outlet box.
Hardware Used
Wire Connector x 4
AA
AA
AA
2

12 13
FINAL INSTALLATION
7
7. If you want to use the light kit (J), connect male plug
from motor housing assembly (G) to the female plug
from switch housing (I).
WARNING
should be turned off prior to the removal of the light kit.
G
I
Female
plug
Male plug
8. Attach switch housing (I) to switch housing cover (H).
Align switch housing (I) holes with switch housing
cover (H) holes. Install the previously removed screws
(Step 6, page 12) and tighten securely.
Note: The wider gap in the edge of the switch housing
cover (H) should align with reverse switch on the switch
housing (I).
9. Install bulbs (L) into sockets.
Note: The fan has an energy-saving wattage limiter
included. If candelabra-base bulbs are over 190
watts, light will automatically turn off. Please ensure
bulb wattage is always below 190 watts.
FINAL INSTALLATION
8
I
Screw
H
9
L
10. Remove preassembled rubber washer, hex nut, 10
MN
Hex Nut
Rubber
Washer
J
Lowes.com/harborbreeze Lowes.com/harborbreeze
6. Remove preassembled screws from the switch housing
cover (H).
If using fan WITH the light kit, continue to Step 7.
If using fan WITHOUT the light kit, proceed to Step 14.
Screw
H
6
Hardware Used
5. Attach blade bracket (E) to motor housing assembly (G)
with two blade bracket screws and washers (GG). Securely
tighten blade bracket screws and washers (GG). Repeat for
remaining blade assemblies.
5
Blade Bracket Screw with
Washer x 8
GG
E
G
GG

14 15
FINAL INSTALLATION
14. If you do not want to use the light kit (J), remove four
connectors from light kit (J) .
15. Remove the preassembled hex nut and switch
housing (I) from light kit (J). 15
Hex nut
I
J
14
Connector
J
FINAL INSTALLATION
16. Insert plastic plug (DD) into center hole in switch
housing (I).
DD Plastic Plug x 1
I
Hardware Used
DD
16
Lowes.com/harborbreeze Lowes.com/harborbreeze
12. Place previously removed rubber washer and hex nut
(Step 10, page 13) onto the pipe and securely tighten.
Pass fan pull chain through side hole on bowl cap (M),
securely tighten.
12
M
N
Hardware Used
Fan Pull Chain Extension x 1
BB
Light Pull Chain Extension x 1
CC
13. Attach fan pull chain extension (BB) and light kit
pull chain extension (CC) to corresponding chains.
Assembly is now complete.
13
BB
CC
11. Place glass bowl (K) on the preassembled pipe on
Thread fan pull chain through side hole on glass bowl
(K). Make sure pull chain hangs clear and is not tangled
in light kit (J) socket. Thread light kit pull chain through
center hole on glass bowl (K).
Note: Two people are recommended for this step.
11
K
I

FINAL INSTALLATION
Lowes.com/harborbreeze Lowes.com/harborbreeze
18
18. Attach switch housing (I) to switch housing cover (H).
Align switch housing (I) holes with switch housing cover
(H) holes. Install the previously removed screws
(Step 6, page 12) and tighten securely. Add fan pull
chain extension (BB) to corresponding chain.
Note: The wider gap in the edge of the switch housing
cover (H) should align with reverse switch on the switch
housing (H).)
BB
I
OPERATION INSTRUCTIONS
1. PULL CHAINS:
• The fan pull chain is for motor speed control: High, Medium, Low and Off. Pull the
chain once for each position.
• The light pull chain controls the light xture either ON or OFF with each pull the chain.
2. REVERSE SWITCH:
When the season changes, you may want to change the direction
the fan spins. To switch between clockwise and counterclockwise
rotation, ip the fan reversal switch.
Note: Wait for fan to stop before reversing switch.
• In warmer weather, counterclockwise rotation creates a
downward air ow, which cools the air. Push the switch
LEFT and see a Sun icon.
• In cooler weather, clockwise rotation creates an upward air
ow, which moves hot air from the ceiling into the room.
Push the switch RIGHT and see a Snowake icon.
16 17
17. Connect male plug from motor housing
assembly (G) to female plug from switch
housing (I).
17
I
Male plug
Female plug
G
H
Hardware Used
Fan Pull Chain Extension x 1
BB
Reverse
switch
Sun icon
Snowflake icon
Sun icon
Snowflake icon

1918
PART DESCRIPTION PART #
E Blade Bracket 104000-0319ZW
F Blade 108001-6040ZW
K Glass Bowl 990704-0520FI
REPLACEMENT PARTS LIST
Printed in China
For replacement parts, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST,
Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
The manufacturer warrants this fan to be free from defects in workmanship and material present at
time of shipment from the factory for lifetime limited from the date of purchase. This warranty applies
only to the original purchaser. The manufacturer agrees to correct such defect at no charge or at our
option replace the ceiling fan with a comparable or superior model.
To obtain warranty service, present a copy of your sales receipt as proof of purchase. All cost of
removal and reinstallation are the expressed responsibility of the purchaser. Any damage to the
the manufacturer of the fan, are at the purchaser’s own responsibility. The manufacturer assumes no
responsibility whatsoever for fan installation during the lifetime limited warranty. Any service
performed by an unauthorized person will render the warranty invalid.
varying weather conditions. Any glass provided with this fan is not covered by the warranty.
date of purchase. For the balance of the warranty, call our customer service department at
1-800-643-0067 for return authorization and shipping instructions so that we may repair or replace
the ceiling fan. Any fan or parts returned improperly packaged is the sole responsibility of the
purchaser. There is no further expressed warranty. The manufacturer disclaims any and all implied
warranties.
The duration of any implied warranty which can not be disclaimed is limited to the lifetime limited
or special damages arising at or in connection with product use or performance except as may
rights which vary from state to state. This warranty supersedes all prior warranties.
Note: A small amount of “wobble” is normal and should not be considered a defect.
WARRANTY
E
FK
Harbor Breeze®is a registered
sthgirllA.CLL,FLfokramedar
treserved.
Lowes.com/harborbreeze
Lowes.com/harborbreeze
TROUBLESHOOTING
• IMPORTANT: Shut off main power supply before beginning any maintenance.
• DO NOT use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly
dampened cloth will be suitable for most cleaning.
blades with a lint-free cloth. You may occasionally apply a light coat of furniture polish to blades for
added protection.
•At least twice each year, tighten all screws and lower canopy to check mounting bracket screws
and downrod assembly.
• Bulb Replacement: Use two 60-watt max. type-A15 candelabra-base bulbs.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Fan blades do not
move.
1. Chain switch is “off”.
2. Faulty wire connection.
3. Reverse switch not engaged.
1. Pull chain switch.
2. Turn power off. Loosen canopy;
check all connections.
Noisy operation. 1. Blades are loose.
2. Cracked blade.
3. Unapproved speed control.
1. Tighten all blade screws.
2. Replace blades (call customer
service).
3. Replace with an approved speed
control device.
Excessive wobbling. 1. Blades are loose.
2. Blade brackets incorrectly
attached.
3. Unbalanced blades.
4. Fan not securely mounted.
5. Fan too close to vaulted ceiling.
1. Tighten all blade screws.
2. Reinstall blade brackets.
3. Switch with blade from opposite side.
4. Turn power off. Carefully loosen
canopy and remount securely.
5. Lower fan or move it to another
location.
CARE AND MAINTENANCE