Hawking HWABN1 User manual

COPYRIGHT
Copyright ©2008/2009 by Hawking Technologies, Inc. All rights reserved. No
part of this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language or computer language, in any
form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of this company
This company makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties, merchantability or fitness for any particular purpose. Any software
described in this manual is sold or licensed "as is". Should the programs prove
defective following their purchase, the buyer (and not this company, its
distributor, or its dealer) assumes the entire cost of all necessary servicing,
repair, and any incidental or consequential damages resulting from any defect
in the software. Further, this company reserves the right to revise this
publication and to make changes from time to time in the contents thereof
without obligation to notify any person of such revision or changes.
LIMITED WARRANTY
Hawking Technology guarantees that every HWABN1 Hi-Gain Wireless-300N
Access Point/Bridge is free from physical defects in material and workmanship
under normal use for one (1) year from the date of purchase. If the product
proves defective during this one-year warranty period, call Hawking Customer
Service in order to obtain a Return Authorization number. Warranty is for
repair or replacement only. Hawking Technology does not issue any refunds.
BE SURE TO HAVE YOUR PROOF OF PURCHASE. RETURN REQUESTS
CAN NOT BE PROCESSED WITHOUT PROOF OF PURCHASE. When
returning a product, mark the Return Authorization number clearly on the
outside of the package and include your original proof of purchase.
IN NO EVENT SHALL HAWKING TECHNOLOGY’S LIABILTY EXCEED THE
PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE OR ITS

DOCUMENTATION. Hawking Technology makes no warranty or
representation, expressed, implied or statutory, with respect to its products or
the contents or use of this documentation and all accompanying software, and
specifically disclaims its quality, performance, merchantability, or fitness for
any particular purpose. Hawking Technology reserves the right to revise or
updates its products, software, or documentation without obligation to notify
any individual or entity. Please direct all inquiries to:
[e-mail]

Federal Communication Commission
Interference Statement
FCC Part 15
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
This equipment must be installed and operated in accordance with provided
instructions and a minimum 20 cm spacing must be provided between computer
mounted antenna and person’s body (excluding extremities of hands, wrist and feet)
during wireless modes of operation.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for
compliance could void the authority to operate equipment.
Federal Communication Commission (FCC) Radiation Exposure
Statement
This equipment complies with FCC radiation exposure set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency
exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches)
during normal operation.
The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.

R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF
THE EUROPEAN PARLIAMENTAND THE COUNCIL of March 9, 1999 on radio
equipment and telecommunication terminal Equipment and the mutual recognition of
their conformity (R&TTE).
The R&TTE Directive repeals and replaces in the directive 98/13/EEC
(Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As
of April 8, 2000.
Safety
This equipment is designed with the utmost care for the safety of those who install
and use it. However, special attention must be paid to the dangers of electric shock
and static electricity when working with electrical equipment. All guidelines of this
and of the computer manufacture must therefore be allowed at all times to ensure the
safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use inAustria,
Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg,
the Netherlands, Portugal, Spain, Sweden, and the United Kingdom.
The ETSI version of this device is also authorized for use in EFTA member states:
Iceland, Liechtenstein, Norway, and Switzerland.
EU Countries Not intended for use
None.

CONTENTS
Chapter I: Product Information................................................................1
1-1 Product Introduction........................................................................................1
1-2 Safety Information...........................................................................................2
1-3 System Requirements......................................................................................3
1-4 Package Contents.............................................................................................4
1-5 Product Overview............................................................................................5
Chapter II: System and Network Setup ....................................................7
2-1 Installing the access point to your Network ....................................................7
2-2 Connecting to the Wireless Access point by web browser..............................8
2-2-1 Windows 95/98/Me IP address setup ............................................................... 9
2-2-2 Windows 2000 IP address setup......................................................................11
2-2-3 Windows XP IP address setup........................................................................ 12
2-2-4 Windows Vista IP address setup..................................................................... 15
2-2-5 Connecting to Web Management Interface.................................................... 17
2-3 View System Status and Information ............................................................19
2-4 Selecting an Operating Mode for your Wireless Access Point......................21
2-4-1 Bridge Client Mode (Station-Infrastructure).................................................. 23
2-4-1-1 Wireless Site Survey................................................................................... 25
2-4-2 AP Bridge-Point to Point Mode ..................................................................... 26
2-4-3 AP Bridge-Point to Multi-Point Mode........................................................... 28
2-4-4 AP Bridge-WDS Mode .................................................................................. 30
2-5 WPS Setting...................................................................................................33
2-5 Advanced Wireless Settings...........................................................................36
2-6 Wireless Security...........................................................................................39
2-6-1 Disable Security............................................................................................. 41
2-6-2 WEP............................................................................................................... 42
2-6-3 WPA Pre-shared Key...................................................................................... 44
2-6-4 WPA RADIUS................................................................................................ 46
2-6-5 802.1x Authentication .................................................................................... 48
2-7 MAC Filtering ...............................................................................................50
2-8 System Utilities..............................................................................................52
2-8-1 Change Password........................................................................................... 52
2-8-2 IPAddress of the Wireless Access point ........................................................ 53
2-8-3 DHCP Server.................................................................................................. 55
Chapter III: Advanced Configuration ....................................................57

3-1 Configuration Backup and Restore................................................................57
3-2 Firmware Upgrade.........................................................................................59
3-3 System Reset..................................................................................................60
Chapter IV: Appendix ..............................................................................61
4-1 Hardware Specification .................................................................................61
4-2 Troubleshooting.............................................................................................62
4-3 Glossary.........................................................................................................64

1
Chapter I: Product Information
1-1 Product Introduction
Thank you for purchasing this wireless access point!
Easy install procedures allow any computer user to setup a network
environment in very short time - within minutes, even inexperienced
users. Just follow the instructions given in this user manual, you can
complete the setup procedure and release the power of this access point
all by yourself!
Other features of this access point include:
•Compatibility with IEEE 802.11b/g/Draft-N wireless network standard -
works with other 802.11b/g/Draft-N wireless devices.
•High speed wireless network, six times faster than conventional
802.11g wireless network (up to 300Mbps).
•Supports DHCP server function.
•Supports 64/128-bit WEP, WPA, and WPA2 wireless data encryption.
•Supports MAC address filtering (Only allow specific wireless device of
your choice to connect to this access point).
•Supports RADIUS server, only allow users listed in your authorization
server to use wireless network.
•Easy to use web-based GUI (Graphical User Interface) for network
configuration and management purposes.

2
1-2 Safety Information
In order to keep the safety of users and your properties, please follow the
following safety instructions:
1. This access point is designed for indoor use only; DO NOT place this
access point outdoor.
2. DO NOT put this access point at or near hot or humid places, like
kitchen or bathroom. Also, do not left this access point in the car in
summer.
3. DO NOT pull any connected cable with force; disconnect it from the
access point first.
4. If you want to place this access point at high places or hang on the wall,
please make sure the access point is firmly secured. Falling from high
places would damage the access point and its accessories, and warranty
will be void.
5. Accessories of this access point, like antenna and power supply, are
dangerous to small children under 3 years old. They may put the small
parts in their nose or mouth and it could cause serious damage to them.
KEEP THIS ACCESS POINT OUT THE REACH OF CHILDREN!
6. The access point will become hot when being used for a long time
(This is normal and is not a malfunction). DO NOT put this access point
on paper, cloth, or other flammable materials.
7. There’s no user-serviceable part inside the access point. If you found
that the access point is not working properly, please contact your dealer
of purchase and ask for help. DO NOT disassemble the access point, or
warranty will be void.
8. If the access point falls into water when it’s powered, DO NOT use
your hand to pick it up. Switch the electrical power off before you do
anything, or contact an experienced electrical technician for help.
9. If you smell something strange or even see some smoke coming out
from the access point or power supply, remove the power supply or
switch the electrical power off immediately, and call dealer of purchase
for help.

3
1-3 System Requirements
zOne computer (PC) with an available CD or DVD-ROM drive
zInternet Web Browser (Internet Explorer, etc.)
zA Wired or Wireless networking adapter (e.g. Airport card, built-in
Ethernet adapter, etc.)
zWireless-B, G, or N Access Point or Router

4
1-4 Package Contents
Before you start to use this access point, please check if there’s anything
missing in the package, and contact your dealer of purchase to claim for
missing items:
□ Hi-Gain Wireless Access Point/Bridge (main body, 1 pcs)
□ 3dBi Dipole Antenna (2 pcs)
□ Quick Installation Guide (1 pcs)
□ A/C power adapter (1 pcs)
□ Ethernet cord (1 pcs)
□ Setup CD (1 pcs)

5
1-5 Product Overview
Top Panel
LED Name
(Left to Right) Light Status Description
PWR On The access point is switched on and correctly
powered.
WLAN
On Wireless WPS mode is enabled.
Off Wireless network is switched off.
Flashing Wireless LAN activity (transferring or receiving
data).
LAN
On LAN port is connected
Off LAN port is not connected
Flashing LAN activity (transferring or receiving data)

6
Back Panel
Item Name Description
Antennas Two reserve SMA antenna connectors for screwing 3dBi
detachable antennas enclosed with the product.
Power
(12V DC)
Power connector, connects to A/C power adapter.
Reset Reset the router to factory default settings (clear all settings).
Press this button and hold for 10 seconds to restore all settings to
factory defaults.
NETWORK Local Area Network (LAN) port.

7
Chapter II: System and Network Setup
2-1 Installing the access point to your Network
Please follow the following instruction to build the network connection
between your new wireless access point and your computers, network
devices:
1. Connect the access point to the wireless router in your network
through the LAN port of the access point by Ethernet cable.
2. Connect the A/C power adapter to the wall socket, and then connect it
to the ‘Power’ socket of the access point.
3. Please check all LEDs on the front panel. ‘PWR’ LED should be
steadily on, LAN LEDs should be on if the access point is correctly
connected to the router. If PWD LED is not on, or any LED you
expected is not on, please recheck the cabling, or jump to ‘4-2
Troubleshooting’for possible reasons and solution.

8
2-2 Connecting to the Wireless Access point by web browser
After the network connection is built, the next step you should do is
setup the access point with proper network parameters, so it can work
properly in your network environment.
Before you can connect to the access point and start configuration
procedures, your computer must be able to get an IP address
automatically (use dynamic IP address). If it’s set to use static IP address,
or you’re unsure, please follow the following instructions to configure
your computer to use dynamic IP address:
If the operating system of your computer is….
Windows 95/98/Me - please go to section 2-2-1
Windows 2000 - please go to section 2-2-2
Windows XP - please go to section 2-2-3
Windows Vista please go to section 2-2-4

9
2-2-1 Windows 95/98/Me IP address setup
1. Click ‘Start’button (it should be located at lower-left corner of your
computer), then click control panel. Double-click Network icon, and
Network window will appear. Select ‘TCP/IP’, then click ‘Properties’.

10
2. Select ‘Specify an IP address’, then input the following settings in
respective field:
IP address: 192.168.1.2
Subnet Mask: 255.255.255.0
click ‘OK’when finish.

11
2-2-2 Windows 2000 IP address setup
1. Click ‘Start’button (it should be located at lower-left corner of your
computer), then click control panel. Double-click Network and Dial-up
Connections icon, double click Local Area Connection, and Local Area
Connection Properties window will appear. Select ‘Internet Protocol
(TCP/IP)’, then click ‘Properties’

12
2. Select ‘Use the following IP address’, then input the following settings
in respective field:
IP address: 192.168.1.2
Subnet Mask: 255.255.255.0
click ‘OK’when finish.
2-2-3 Windows XP IP address setup
1. Click ‘Start’button (it should be located at lower-left corner of your
computer), then click control panel. Double-click Network and Internet
Connections icon, click Network Connections, and then double-click
Local Area Connection, Local Area Connection Status window will
appear, and then click ‘Properties’