Hawking HWABN2 User manual

website www.hawkingtech.com
e-mail [email protected]
©COPYRIGHT 2012 HAWKING TECHNOLOGIES,INC. ALL RIGHTS RESERVED.
USER’S MANUAL

Hi-Gain™ Wireless 300N
Access Point/Bridge Pro
HWABN2

1
COPYRIGHT
Copyright ©2012 by Hawking Technologies, Inc. All rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval system,
or translated into any language or computer language, in any form or by any means,
electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the
prior written permission of this company
LIMITED WARRANTY
Hawking Technology guarantees that every HWABN2 Hi-Gain™ Wireless 300N
Access Point/Bridge Pro is free from physical defects in material and workmanship
under normal use for one (1) year from the date of purchase. If the product proves
defective during this one-year warranty period, call Hawking Customer Service in
order to obtain a Return Authorization number. Warranty is for repair or
replacement only. Hawking Technology does not issue any refunds. BE SURE TO
HAVE YOUR PROOF OF PURCHASE. RETURN REQUESTS CAN NOT BE
PROCESSED WITHOUT PROOF OF PURCHASE. When returning a product,
mark the Return Authorization number clearly on the outside of the package and
include your original proof of purchase.
IN NO EVENT SHALL HAWKING TECHNOLOGY’S LIABILTY EXCEED THE
PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE
OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE OR ITS
DOCUMENTATION. Hawking Technology makes no warranty or representation,
expressed, implied or statutory, with respect to its products or the contents or use of
this documentation and all accompanying software, and specifically disclaims its
quality, performance, merchantability, or fitness for any particular purpose.
Hawking Technology reserves the right to revise or updates its products, software, or
documentation without obligation to notify any individual or entity. Please direct all
inquiries to: [e-mail]

2
Federal Communication Commission
Interference Statement
FCC Part 15
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
This equipment must be installed and operated in accordance with provided
instructions and a minimum 20 cm spacing must be provided between computer
mounted antenna and person’s body (excluding extremities of hands, wrist and feet)
during wireless modes of operation.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the authority to operate equipment.

3
Federal Communication Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency
exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches)
during normal operation.
The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF
THE EUROPEAN PARLIAMENTAND THE COUNCIL of March 9, 1999 on radio
equipment and telecommunication terminal Equipment and the mutual recognition of
their conformity (R&TTE).
The R&TTE Directive repeals and replaces in the directive 98/13/EEC
(Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As
of April 8, 2000.
Safety
This equipment is designed with the utmost care for the safety of those who install
and use it. However, special attention must be paid to the dangers of electric shock
and static electricity when working with electrical equipment. All guidelines of this
and of the computer manufacture must therefore be allowed at all times to ensure the
safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use inAustria,

4
Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg,
the Netherlands, Portugal, Spain, Sweden, and the United Kingdom.
The ETSI version of this device is also authorized for use in EFTA member states:
Iceland, Liechtenstein, Norway, and Switzerland.
EU Countries NOT intended for use
None.

5
Table of Contents
Chapter I: Product Information......................................................................................7
1-1 Introduction and Safety Information ...................................................................7
1-2 Safety Information...............................................................................................8
1-3 System Requirements..........................................................................................9
1-4 Package Contents...............................................................................................10
1-5 Product Overview..............................................................................................11
Chapter II: System and Network Setup .......................................................................13
2-1 Build Network Connection................................................................................13
2-2 Definitions of the Different Modes ...................................................................14
2-3 Connecting to the HWABN2 via Web Browser ................................................17
2-3-1 Windows 95/98/Me IP address setup .........................................................18
2-3-2 Windows 2000 IP address setup.................................................................19
2-3-3 Windows XP IP address setup....................................................................21
2-3-4 Windows Vista/7 IP address setup..............................................................23
2-3-5 Mac OS X IPAddress Setup ......................................................................25
2-3-6 Tablet/Smartphone Setup ...........................................................................26
2-3-7 Accessing the Web Page User Interface.....................................................28
2-4 ‘Quick Setup’.....................................................................................................30
2-4-1 Setup Procedure for ‘Access Point’ ...........................................................32
2-4-2 Setup Procedure ‘Station-Infrastructure’ (Wireless Bridge) ......................35
2-4-3 Setup procedure for ‘AP Bridge-Point to Point’:.......................................37
2-4-4 Setup procedure for ‘AP Bridge-Point to Multi-Point’..............................39
2-4-5 Setup Procedure for ‘AP-Bridge WDS’.....................................................41
Chapter III General Setup............................................................................................43
3-1 Time zone and time auto-synchronization.........................................................44
3-2 Change Management password.........................................................................45
3-3 Wired LAN Configuration.................................................................................48
3-3-1 Local Network............................................................................................49
3-3-2 DHCP Server:.............................................................................................50
3-4 Wireless Network ..............................................................................................52
3-4-1 Basic Wireless Settings ..............................................................................53
3-4-2 Advanced Wireless Settings.......................................................................61
3-4-3 Security Settings.........................................................................................64
3-4-4 Wireless Access Control.............................................................................70
3-4-5 Wi-Fi Protected Setup (WPS) ....................................................................73
3-4-6 Security Tips for Wireless Network...........................................................76

6
Chapter IV Status and Tools ........................................................................................77
4-1 System Status.....................................................................................................77
4-1-1 System information and firmware version.................................................77
4-1-2 Local Network............................................................................................78
4-1-3 System Log.................................................................................................79
4-1-4 Security Log...............................................................................................80
4-1-5 Active DHCP client list..............................................................................81
4-1-6 Statistics .....................................................................................................82
4-2 Configuration Tools...........................................................................................83
4-3 Firmware Upgrade.............................................................................................83
4-4 System Reset......................................................................................................86
Chapter V: Appendix....................................................................................................87
5-1 Hardware Specification .....................................................................................87
5-2 Troubleshooting.................................................................................................88
5-3 Glossary.............................................................................................................90

7
Chapter I: Product Information
1-1 Introduction and Safety Information
Thank you for purchasing the HWABN2 Hi-Gain™ Wireless 300N Access
Point/Bridge Pro. This highly efficient access point is the best choice for Small
office / Home office users. It allows computers and network devices to gain wireless
access in several modes throughout their network. Easy install procedures allow any
computer user to setup a network environment in a very short time.
With built-in IEEE 802.11b/g/Draft-N wireless network capability, all computers and
wireless-enabled network devices (including PDAs, cellular phones, game consoles,
etc.) can connect to this wireless access point/bridge without additional cabling. With
a compatible wireless card installed in your PC, you can transfer files at up to
300Mbps (transfer data rate)!
Other features of the HWABN2 include:
Provides IEEE 802.11b/g/Draft-N wireless LAN capability
5 different Wireless Modes: Access Point, Bridge Client, Bridge Point to
Point, Bridge Point to Multi-Point, AP Bridge WDS modes.
Supports DHCP
Supports 64/128-bit WEP, WPA, and WPA2 wireless data encryption.
Supports MAC address filtering (Only allow specific wireless device of your
choice to connect to this access point).
Easy to use Web-based GUI for network configuration and management
purposes
Auto MDI / MDI-X function for wired Ethernet ports.

8
1-2 Safety Information
In order to keep the safety of users and property, please follow these safety
instructions:
1. This access point is designed for indoor use only; DO NOT place this access point
outdoors.
2. DO NOT put this access point at or near hot or humid places, like kitchens or
bathrooms. Also, do not leave this access point in the car in summer.
3. DO NOT pull any connected cable with force; disconnect them from the access
point first.
4. If you want to place this access point in a high place or hang on the wall, please
make sure the access point is firmly secured. Falling can damage the access point and
its accessories and the warranty will be void.
5. Accessories of this access point, like antennas and power supply, are a danger to
small children under 3 years old. KEEP THIS ACCESS POINT OUT OF THE
REACH OF CHILDREN!
6. The access point will become warm when used for a long period of time (This is
normal and is not a malfunction). DO NOT put this access point on paper, cloth, or
other flammable materials.
7. There are no user-serviceable parts inside the access point. If you have found that
the access point is not working properly, please contact technical support or your
place of purchase and ask for help. DO NOT disassemble the access point, or
warranty will be void.
8. If the access point falls into water when it’s powered on, DO NOT use your hands
to pick it up. Switch the electrical power off before you do anything, or contact an
experienced technician for help.
9. If you smell something strange, or see smoke coming out from the access point or
power supply, remove the power supply or switch the electrical power off
immediately, and call techsupport or your place of purchase for help.

9
1-3 System Requirements
One computer (Mac or PC).
Internet Web Browser (Internet Explorer, Safari, etc.)
AWired or Wireless network adapter (e.g. Airport card, built-in Ethernet
adapter, etc.)

10
1-4 Package Contents
Before you start to use this access point, please check if there’s anything missing in
the package, and contact your place of purchase or contact Hawking Technologies.
HWABN2 Hi-Gain™ Wireless 300N Access Point/Bridge Pro (main body, 1 pcs)
Quick Installation Guide (1 pcs)
Setup CD-ROM (1pcs)
A/C power adapter 12V/1A (1 pcs)
3dBi Dipole Antennas (2 pcs)

11
1-5 Product Overview
Top Panel
LED Name Light Status Description
Power ON Access point is switched on and correctly powered
Wireless
On Wireless network is switched on or WPS mode is on.
Off Wireless network is switched off
Flashing Wireless LAN activity (transferring or receiving data).
LAN 1-5
On LAN port is connected
Off LAN port is not connected
Flashing LAN activity (transferring or receiving data)

12
Back Panel
Item Name Description
Antenna Two SMA antenna connectors for the 3dBi detachable antenna
enclosed with the product.
Power (12V/1A) Power connector, connects to A/C power adapter 12V/1A.
Reset/WPS Reset the router to factory default settings (clear all settings) or
start WPS function. Press this button and hold for 15 seconds to
restore all settings to factory defaults, power off/on. Press this
button for less than 5 seconds to start WPS function.
Network 1-5 Local Area Network (LAN)

13
Chapter II: System and Network Setup
2-1 Build Network Connection
Please follow the following instructions to build the network connection between your
new HWABN2 access point and your computers and other network devices:
1. Connect your HWABN2 to the network port of your computer or connect
wirelessly to it.
2. Connect all your computers and network devices (network-enabled consumer
devices other than computers, like game console, or switch / hub) to the network.
3. Connect the A/C power adapter to the wall socket, and then connect it to the
‘Power’ socket of the access point.
4. Please check all LEDs on the front panel. ‘PWR’LED should be steadily on, LAN
LEDs should be on if the device is connected to the network. If PWR LED is not
on, or any LED you expected is not on, please recheck the cabling, or jump to ‘5-2
Troubleshooting’for possible reasons and solutions.

14
2‐2DefinitionsoftheDifferentModes
The HWABN2 supports 5 different Modes:
Access Point: Standard default mode. The HWABN2 will broadcast a WiFi signal
for other computers and devices to connect to. Must be plugged into the router or
network after setup.
Station – Infrastructure (Bridge): The HWABN2 will allow you connect wired
devices wirelessly to an existing wireless router or access point. It will “bridge”
these devices wirelessly with your network. It will not broadcast any WiFi signal.
It will only make a wireless connection between the Access Point and the HWABN2.

15
AP Bridge – Point to Point: Similar to station-infrastructure, this requires two
HWABN2’s on each end. This will create a wireless bridge between these two
points. No WiFi signal will be broadcast and it will only make a wireless connection
between those two points.
APBridge – Point to Multi-Point: Similar to AP Bridge – Point to Point, this allows
you to connect several HWABN2’s to one point. No WiFi signal will be broadcast
and it will only make a wireless connection between the HWABN2s.

16
AP Bridge WDS: Wireless Distributing System. This allows you to create a wireless
network using up to four HWABN2’s using the same SSID (wireless name). It will
broadcast a WiFI signal.

17
2-3 Connecting to the HWABN2 via Web Browser
After the network connection is built, the next step you should do is setup the access
point with proper network parameters, so it can work properly in your network
environment.
Before you can connect to the access point and start configuration procedures, your
computer must be set to static IP. Please follow the following instructions to
configure your computer to use a static IP address:
If the operating system of your computer is….
Windows 95/98/Me - please go to section 2-3-1
Windows 2000 - please go to section 2-3-2
Windows XP - please go to section 2-3-3
Windows Vista/7 - please go to section 2-3-4
Mac OS - please go to section 2-3-5
Tablet/Smartphone - please go to section 2-3-6

18
2-3-1 Windows 95/98/Me IP address setup
1. Click ‘Start’button (it should be located at lower-left corner of your
computer), then click control panel. Double-click Network icon, and
Network window will appear. Select ‘TCP/IP’, then click ‘Properties’.
2. Select ‘Obtain an IP address from a DHCP server’ and then click ‘OK’.

19
2-3-2 Windows 2000 IP address setup
1. Click ‘Start’button (it should be located at lower-left corner of your
computer), then click control panel. Double-click Network and Dial-up
Connections icon; click Local Area Connection, and Local Area
Connection Properties window will appear. Select ‘Internet Protocol
(TCP/IP)’and then click ‘Properties’