Haws 3511FR Guide

10/18 Model 3511FR Page 1 of 4
1455 Kleppe Lane Sparks, NV 89431-6467 [phone] Fax [phone]
E-mail: [email protected] website: www.hawsco.com
Model 3511FR
Drinking Fountain
INSTALLATION, OPERATION
&
MAINTENANCE INSTRUCTIONS
No. 2077369 (11)
LIMITED WARRANTY
HAWS warrants that this specific product is guaranteed against defective material
or poor workmanship for a period of one year from date of shipment. HAWS
liability under this warranty shall be discharged by furnishing without charge F.O.B.
HAWS Factory any goods, or part thereof, which shall appear to the Company upon
inspection to be of defective material or not of first class workmanship, provided that
claim is made in writing to Haws within a reasonable period after receipt of the
product. Where claims for defects are made, the defective part or parts shall be
delivered to the Company, prepaid, for inspection. HAWS will not be liable for the
cost of repairs, alterations or replacements, or for any expense connected therewith
made by the owner or his agents, except upon written authority from HAWS,
Sparks, Nevada. HAWS will not be liable for any damages caused by defective
materials or poor workmanship, except for replacements, as provided above. Buyer
agrees that HAWS shall not be liable for general, special, or consequential
damages claimed to arise under the contract of sale. The drinking fountain
manufactured by HAWS is warranted to function if installation and maintenance
instructions provided are adhered to. The units also must be used for the purpose
for which they were intended.
NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED,
PROVIDED OR GIVEN BY HAWS.
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL PLEASE CALL:
TECHNICAL SUPPORT: 1-800-766-5612
FOR CUSTOMER SERVICE: 1-888-640-4297

10/18 Model 3511FR Page 2 of 4
RECOMMENDED TOOLS: Hack saw, pipe joint sealant, screwdriver, level, 12"
adjustable wrench, 10" pipe wrench, 9/16”, 1/2”, 7/16” socket wrench or open end
wrench, 5/32” hex key wrench.
LOCATION OF UNIT: The Model 3511FR Drinking Fountain is a wheelchair
accessible drinking water facility. The height dimensions shown meet current ADA
requirements. When installing this unit, local, state or federal codes should be
adhered to. If height other than shown is required, then dimensions must be adjusted
accordingly.
SUPPLY LINE: The minimum recommended line size is 1/2“ IPS with 30-90 psi (2-6
ATM) flowing pressure. Where sediment or mineral content is a problem, an inlet filter
is recommended.
PLUMBING CONNECTIONS: Waste outlet is male 1-1/2” O.D. tailpiece.
MAINTENANCE: Refer to 6518.2FR Operation and Maintenance Sheet for more
information.
TROUBLESHOOTING
PROBLEM
REPAIR CHECKLIST
1.
Insufficient bubbler flow.
1a.
Check that inlet screwdriver stop
valve is wide open. (Customer
supplied)
b.
Verify minimum 30 psi flowing
supply pressure.
c.
Adjust valve to increase flow. See
6518.2FR Manual.
d.
Clean screens (inside nozzle body).
Unscrew nozzle insert and very
gently activate water supply to pop
out qty. 3 screens (be careful not to
lose screens). Remove any debris
clogging the screen openings and
place back into nozzle body.
Reassemble nozzle insert.
General Notes:
Before tightening nut and ferrule assembly, push tubing into fitting until it bottoms out to
ensure correct engagement with O-Ring.
For more information about Haws products, see our website: www.hawsco.com
© 2018 Haws®Corporation –All Rights Reserved
HAWS® and other trademarks usedin these materials are the exclusive property of Haws Corporation.

6518.2FR
VALVE
VALVE BOX
(NOT SUPPLIED)
5881PBA
PUSH BUTTON
ASSEMBLY
5705
BUBBLER HEAD
0005624292
STRAINER
A
STYLE B
(TUBING CONNECTS TO
INSERT ASSY)
FOUNTAIN COULD HAVE EITHER STYLE
STYLE A
(TUBING CONNECTS
TO ELBOW)
DETAIL A
(OPTIONAL)
FOR REMOVAL
OF NOZZLE
WITH TUBE
0002082253
PARTS BREAKDOWN
APPROVED
DRAWN
PART NUMBER
SCALE: SHEET OF
REVISION
DRAWING TYPE: SIZE: A
BYECN NO.
PAGE
DATE
DATE
ECN:
REVISED PER
CHKD
Haws Corporation - All Rights Reserved
HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
CR
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [e-mail]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
WHEN ORDERING PARTS PLEASE SPECIFY MODEL NUMBER.
P. McMULLEN
05/09/00
11
0002077369
3511FR
11
MJ 10/23/18
JP
3 OF 4
PARTS BREAKDOWN
5362
2018
FV
5705LAMIN
(OBSOLETE -
SHOWN FOR
REFERENCE
ONLY.)
ENSURE TUBE IS DISCONNECTED FROM "PUSH-IN" TYPE
CONNECTOR ON PRESSURE REGULATOR PRIOR TO
REMOVAL. APPLY A DROP OF LOCTITE 222MS ON
NOZZLE THREADS PRIOR TO REASSEMBLING BACK
ONTO BUBBLER HEAD. REATTACH TUBE TO "PUSH-IN"
TYPE CONNECTOR ENSURING IT IS FULLY BOTTOMED
OUT.
1
NOTE:
1
1

6518.2FRVALVEASSY
GROUNDLEVEL
CONCRETEANCHORS
BURYDEPTHSOF48"[1219mm]AND72"
MINIMUMTOAPOROUSGRAVELFILLOR
MAINSEWERLINELOCATEDBELOW
5"
Ø127mm
[1829mm]. WASTE TO BE 1-1/4" IPS
FROST LINE (NOT SUPPLIED).
4X 1/2"-13 UNC
152mm
6"
(NOT SUPPLIED)
30" SQUARE
CONCRETE SLAB
3"
76mm
MTG BOLTS 4X
248mm
4X
MOUNTINGDETAIL
1016mm
(TO SPOUT OUTLET)
40"
(SUPPLIED)
1 1/2" O.D. TAILPIECE
9 3/4"
9 3/4"
248mm
(SUPPLIED)
IN CONCRETE SLAB
1/2" ANCHOR BOLTS
MOUNTING SLOTS FOR
1/2"-13 UNC
(TO SPOUT OUTLET)
76mm
3"
686mm
27"
746mm
29 3/8"
18"
457mm
914mm
36"
14 1/8"
359mm
DISCONNECT COUPLING TO
REPLACE BUBBLER HEAD
2X
APPROVED:
DRAWN:
PART NUMBER
SCALE: SHEET OF
REVISION
DRAWING TYPE: SIZE: A
BY:ECN NO.
PAGE
DATE:
DATE:
ECN:
REVISED PER
CHK'D.:
Haws Corporation - All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
CR
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [email protected]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
PM 05/08/00
11
0002077369.D
3511FR
1:14
11
MJ 10/23/18
JP
4 OF 4
INSTALLATION
5362
2018
FV
VALVE BOX
(NOT SUPPLIED)