Helios Core User manual

Welcome to Helios™. The steps below will walk you
through getting your Helios Core™ and mobile app
activated and ready to go.
Once set up is complete, you can hit the ice to start
benchmarking your skating performance with every
stride.
Use this data to set personal goals and track your
improvement based on the benchmark data of you, your
teammates and other Helios™ users.
In the box
a. Helios Core™
b. Mounting strap
c. Wireless charging pad
d. USB charging cable
Getting started
Charge your Helios Core™
Remove the wireless charging pad and the charging
cord from the box and plug it into a power source.
Place the Helios Core™ on the center of the pad with
the Helios™ logo (HH) facing up.
While charging, the Helios™ logo will slowly pulse
orange on and off. When charging is complete, the
logo will steadily glow orange while still on the charger.
You can remove your Core™ from the charging pad at
this time.
PRO TIP: You can see your battery level in the Helios™
mobile app. A full charge typically takes about three
hours.
a.
d.
c.
b.
www.helioshockey.com

Before mounting your Helios
Core™, flip it over and write your
name and phone number on the
back.
Download the Helios™ mobile app Pair your Helios Core™ with your iOS device
Go to the Apple App Store and search for
“Helios”. Download and install the mobile app.
Create your prole
1. Launch the mobile app and press “Join Now”.
2. Enter your email address and press “Next”
3. Create a secure password and press “Next”
4. Verify your identity by entering your confirmation
code (sent via email) - Press “Next”
5. Enter your First and Last name - press “Next”
6. Select your role (Player or Coach) - press “Next”
7. Enter your primary position - press “Next”
Profile complete. Nicely done!
Press “Start”
On the next screen, press “Next”
Then press “Pair your Helios Core™”
TIP: Be sure you have Bluetooth™ turned on.
Press “Pair Helios Core™”
Hold your Helios Core™ device to the top of your iPhone
or iPad and press “Start Pairing”.
When pairing is complete, your “Activity” screen will be
displayed.
You’re connected!
FCC Compliance Information
FCC ID: 2AXW5HC1
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the party respon-
sible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IC Compliance Information
IC: 26567-HC1
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that
may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélec-
trique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
To mount your Helios Core™,
grab the black tip of the mount-
ing strap and thread it through
the provided cutout. Pinch to
secure.
Next, With the Helios “HH” logo
upright, secure the Helios Core™
by wrapping the strap around
the chest protector, looping
through the second cutout,
pulling the strap tight enough to
keep the device from sliding,
and securing it by pinching
together.