Herman Miller Noguchi Rudder Coffee Table User manual

2.1
Assemble Leg Brackets to Wood Leg.
Step 2
1.1
By hand, place the Top upside down on a protective surface.
1.2
Position leg to the top in a way the screw holes on the leg are aligned to the screw holes
on the top.
1.3
Using power driver on low torque setting, tighten screws.
1.4
Repeat for other leg.
Step 1
Power Driver
Parts Included
Tools Required
(4) Long Screw (Qty: 8) (5) Leg Brackets (Qty: 2) (6) Short Screw (Qty: 12)
(2) Wire Leg (Qty: 2) (3) Wood Leg (Qty: 1)
How to assemble
your table.
HermanMiller
The Collection
Noguchi® Rudder Coffee Table (IN52)
For more information about our products and services or to see a list of dealers, please visit us at
hermanmiller.com or call [phone].
© 2013 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. BBFZ - A.
® Y, Noguchi are among the registered trademarks of Herman Miller, Inc.
(1) Top
Hole
Slot
Align
(6) Short Screw
(4) Long Screw
#2 Philips drive bit
HermanMiller Noguchi® Rudder Table Assembly Instructions1

2.1
Assemble Leg Brackets to Wood Leg.
Step 2
1.1
By hand, place the Top upside down on a protective surface.
1.2
Position leg to the top in a way the screw holes on the leg are aligned to the screw holes
on the top.
1.3
Using power driver on low torque setting, tighten screws.
1.4
Repeat for other leg.
Step 1
Power Driver
Parts Included
Tools Required
(4) Long Screw (Qty: 8) (5) Leg Brackets (Qty: 2) (6) Short Screw (Qty: 12)
(2) Wire Leg (Qty: 2) (3) Wood Leg (Qty: 1)
How to assemble
your table.
HermanMiller
The Collection
Noguchi® Rudder Coffee Table (IN52)
For more information about our products and services or to see a list of dealers, please visit us at
hermanmiller.com or call [phone].
© 2013 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. BBFZ - A.
® Y, Noguchi are among the registered trademarks of Herman Miller, Inc.
(1) Top
Hole
Slot
Align
(6) Short Screw
(4) Long Screw
#2 Philips drive bit
HermanMiller Noguchi® Rudder Table Assembly Instructions1

2.1
Assemble Leg Brackets to Wood Leg.
Step 2
1.1
By hand, place the Top upside down on a protective surface.
1.2
Position leg to the top in a way the screw holes on the leg are aligned to the screw holes
on the top.
1.3
Using power driver on low torque setting, tighten screws.
1.4
Repeat for other leg.
Step 1
Power Driver
Parts Included
Tools Required
(4) Long Screw (Qty: 8) (5) Leg Brackets (Qty: 2) (6) Short Screw (Qty: 12)
(2) Wire Leg (Qty: 2) (3) Wood Leg (Qty: 1)
How to assemble
your table.
HermanMiller
The Collection
Noguchi® Rudder Coffee Table (IN52)
For more information about our products and services or to see a list of dealers, please visit us at
hermanmiller.com or call [phone].
© 2013 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. BBFZ - A.
® Y, Noguchi are among the registered trademarks of Herman Miller, Inc.
(1) Top
Hole
Slot
Align
(6) Short Screw
(4) Long Screw
#2 Philips drive bit
HermanMiller Noguchi® Rudder Table Assembly Instructions1

2.1
Assemble Leg Brackets to Wood Leg.
Step 2
1.1
By hand, place the Top upside down on a protective surface.
1.2
Position leg to the top in a way the screw holes on the leg are aligned to the screw holes
on the top.
1.3
Using power driver on low torque setting, tighten screws.
1.4
Repeat for other leg.
Step 1
Power Driver
Parts Included
Tools Required
(4) Long Screw (Qty: 8) (5) Leg Brackets (Qty: 2) (6) Short Screw (Qty: 12)
(2) Wire Leg (Qty: 2) (3) Wood Leg (Qty: 1)
How to assemble
your table.
HermanMiller
The Collection
Noguchi® Rudder Coffee Table (IN52)
For more information about our products and services or to see a list of dealers, please visit us at
hermanmiller.com or call [phone].
© 2013 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. BBFZ - A.
® Y, Noguchi are among the registered trademarks of Herman Miller, Inc.
(1) Top
Hole
Slot
Align
(6) Short Screw
(4) Long Screw
#2 Philips drive bit
HermanMiller Noguchi® Rudder Table Assembly Instructions1

HermanMiller Noguchi® Rudder Table Assembly Instructions2
3.1
Position Wooden leg to the top in a way the screw holes on the Wooden leg are aligned to the
screw holes on the top.
5.1
Rotate the table back to its original position.
4.1
Using power driver tighten the screws. See step 4-A.
Step 3
Step 5
Step 4
Step 4-A
(6) Short Screw

HermanMiller Noguchi® Rudder Table Assembly Instructions2
3.1
Position Wooden leg to the top in a way the screw holes on the Wooden leg are aligned to the
screw holes on the top.
5.1
Rotate the table back to its original position.
4.1
Using power driver tighten the screws. See step 4-A.
Step 3
Step 5
Step 4
Step 4-A
(6) Short Screw

HermanMiller Noguchi® Rudder Table Assembly Instructions2
3.1
Position Wooden leg to the top in a way the screw holes on the Wooden leg are aligned to the
screw holes on the top.
5.1
Rotate the table back to its original position.
4.1
Using power driver tighten the screws. See step 4-A.
Step 3
Step 5
Step 4
Step 4-A
(6) Short Screw

HermanMiller Noguchi® Rudder Table Assembly Instructions2
3.1
Position Wooden leg to the top in a way the screw holes on the Wooden leg are aligned to the
screw holes on the top.
5.1
Rotate the table back to its original position.
4.1
Using power driver tighten the screws. See step 4-A.
Step 3
Step 5
Step 4
Step 4-A
(6) Short Screw