Hewlett Packard Enterprise Integrity NonStop X NS7 Technical manual

HPE Integrity NonStop X NS7 Planning
Guide
Part Number: 799257-005
Published: September 2018
Edition: L15.08 and subsequent L-series RVUs

Contents
About This Document.............................................................................7
Supported Release Version Updates (RVUs)............................................................................... 7
New and Changed Information in 799257–005............................................................................ 7
HPE Integrity NonStop X NS7 Systems................................................ 8
Core Licensing............................................................................................................................ 11
NonStop X NS7 Standard and Optional Hardware..................................................................... 12
c7000 Enclosure.............................................................................................................. 12
NonStop X NS7 Server Blades........................................................................................ 13
CLuster I/O Modules (CLIMs)...........................................................................................13
NonStop IO Expansion IB Switch.....................................................................................22
NonStop X FDR IB ADI Switch.........................................................................................23
Maintenance Switch......................................................................................................... 23
NonStop System Console................................................................................................ 23
UPS and ERM (Optional)................................................................................................. 24
Enterprise Storage System (Optional)............................................................................. 24
System Management Tools.........................................................................................................25
OSM Package.................................................................................................................. 25
Onboard Administrator (OA) and Integrated Lights Out (iLO)..........................................25
Management Subsystems for NS7 Systems....................................................................26
Technical Document for NS7 Systems........................................................................................26
Component Location and Identification.......................................................................................26
Rack and Offset Physical Location...................................................................................26
Site Preparation Guidelines for the NS7 System............................... 27
Rack Power and I/O Cable Entry................................................................................................ 27
Emergency Power-Off Switches................................................................................................. 27
EPO Requirement for NS7 Systems................................................................................ 27
EPO Requirement for R5000 UPS...................................................................................27
EPO Requirement for R12000/3 UPS..............................................................................27
Electrical Power and Grounding Quality..................................................................................... 28
Power Quality...................................................................................................................28
Grounding Systems..........................................................................................................28
Power Consumption.........................................................................................................28
Cooling and Humidity Control..................................................................................................... 28
Weight.........................................................................................................................................29
Flooring....................................................................................................................................... 29
Dust and Pollution Control.......................................................................................................... 29
Zinc Particulates..........................................................................................................................29
Space for receiving and unpacking the system.......................................................................... 29
Operational space for an NS7 System........................................................................................30
NS7 System Installation Specifications..............................................31
Racks ......................................................................................................................................... 31
AC power feeds in a rack................................................................................................. 31
Power Distribution Unit (PDU) types for an Advanced Series G2 rack............................ 31
2

AC input power for an Advanced Series G2 rack....................................................................... 47
Enclosure AC Input for NonStop X Systems...............................................................................50
NS7 Enclosure Power Loads...................................................................................................... 50
Dimensions and Weights for NS7 AC Systems.......................................................................... 53
Service Clearances for NS7 Racks..................................................................................53
Unit Sizes for NS7 Systems............................................................................................. 54
42U G2 Advanced Series rack physical specifications.................................................... 54
42U Intelligent Rack physical specifications.................................................................... 55
36U G2 Advanced Series Rack physical specifications...................................................55
36U Intelligent Rack physical specifications.................................................................... 56
NS7 Enclosure Dimensions............................................................................................. 56
NS7 Rack and Enclosure Weights With Worksheet.........................................................58
Rack Stability for NS7 Systems.................................................................................................. 61
Environmental Specifications for NS7 AC Systems....................................................................62
NS7 Heat Dissipation Specifications and Worksheet ......................................................62
Operating Temperature, Humidity, and Altitude Specifications for NS7 Systems............ 65
NS7 Cooling Airflow Direction.......................................................................................... 65
NS7 Blanking Panels....................................................................................................... 65
NS7 Typical Acoustic Noise Emissions............................................................................65
Tested Electrostatic Immunity for NS7 Systems...............................................................66
Nonoperating Temperature, Humidity, and Altitude Specifications for NS7 Systems................. 66
Calculating Specifications for NS7 Enclosure Combinations......................................................66
Managing NS7 System Resources ..................................................... 68
Planning Kernel Managed Swap (KMS) Space.......................................................................... 68
Default Naming Conventions for NS7 Systems.......................................................................... 68
Possible values of disk and tape LUNs for NS7 Systems...........................................................69
HPE Integrity NonStop X NS7 CG Systems........................................70
NEBS Required Statements....................................................................................................... 72
NS7 CG Standard and Optional Hardware................................................................................. 73
c7000 CG Enclosure........................................................................................................ 73
NonStop X Server Blade for NS7 CG Systems................................................................74
NonStop X FDR IB NS ADI Switches...............................................................................74
IP/Telco CLIM CG and IP/Telco CLIM NC........................................................................74
Storage CLIM CG and Storage CLIM NC ....................................................................... 74
Maintenance Switch CG...................................................................................................76
System Console .............................................................................................................. 76
HPE NonStop 240A Breaker Panel..................................................................................76
HPE NonStop 80A Fuse Panel CG..................................................................................78
HPE NonStop NS7 CG System Alarm Panel...................................................................79
System Installation Specifications for NS7 CG Systems..................80
DC Power Distribution for NS7 CG Systems.............................................................................. 80
NS7 CG Enclosure Power Loads.....................................................................................81
Dimensions and Weights of NS7 CG Systems .......................................................................... 84
Seismic Rack Specifications for NS7 CG Systems .........................................................84
Unit Sizes for NS7 CG Systems.......................................................................................85
Enclosure Dimensions for NS7 CG Systems................................................................... 86
Rack and Enclosure Weights Worksheet for NS7 CG Systems.......................................86
Environmental Specifications for NS7 CG Systems................................................................... 89
Heat Dissipation Specification and Worksheets for NS7 CG Systems............................ 89
Operating Temperature, Humidity, and Altitude................................................................92
3

Site Power Cables for NS7 CG Systems.................................................................................... 92
Required Documentation................................................................................................. 92
Requirements for Site Power or Ground Cables..............................................................92
Websites................................................................................................ 94
Support and other resources...............................................................95
Accessing Hewlett Packard Enterprise Support......................................................................... 95
Accessing updates......................................................................................................................95
Customer self repair....................................................................................................................96
Remote support.......................................................................................................................... 96
Warranty information...................................................................................................................96
Regulatory information................................................................................................................97
Documentation feedback............................................................................................................ 97
Cables.................................................................................................... 98
Cable Types and Connectors......................................................................................................98
UPS and Data Center Power Configurations......................................99
Supported UPS Configurations...................................................................................................99
NS7 System With a Fault-Tolerant Data Center...............................................................99
NS7 System With a Rack-Mounted UPS....................................................................... 100
SAS Disk Enclosures With a Rack-Mounted UPS......................................................... 102
Non-Supported UPS Configurations......................................................................................... 103
NS7 System With a Data Center UPS, Single Power Rail.............................................103
NS7 System With Data Center UPS, Both Power Rails.................................................105
NS7 System With Rack-Mounted UPS and Data Center UPS in Parallel......................107
NS7 System With Two Rack-Mounted UPS in Parallel..................................................108
NS7 System With Cascading Rack-Mounted UPS and Data Center UPS.....................110
Power Distribution Unit (PDU) Types for an Enterprise Series
Rack .....................................................................................................112
Four Intelligent PDUs Without UPS – (NA/JPN and INTL, Single-Phase and Three-Phase)... 113
Four Intelligent PDUs With Single-Phase UPS – (NA/JPN and INTL)...................................... 114
Four Intelligent PDUs With Three-Phase UPS (NA/JPN and INTL) .........................................115
Two Intelligent PDUs Without UPS — (NA/JPN and INTL, Single-Phase and Three-Phase)...116
Two Intelligent PDUs With Single-Phase UPS — (NA/JPN and INTL)..................................... 117
Two Intelligent PDUs With Three-Phase UPS — (NA/JPN and INTL)......................................118
Four Modular PDUs With Three-Phase UPS (NA/JPN and INTL)............................................ 119
Four Modular PDUs With Single-Phase UPS (NA/JPN and INTL)........................................... 120
Four Modular PDUs Without UPS — (NA and JPN, Single-Phase and Three-Phase).............121
Two Modular PDUs Without UPS — (NA/JPN and INTL, Single-Phase and Three-Phase).....122
Two Modular PDU Connections With Single-Phase UPS — (NA/JPN and INTL).................... 123
Two Modular PDU Connections With Three-Phase UPS — (NA/JPN and INTL).....................124
AC Input Power for Enterprise Series and Intelligent Racks.....................................................125
Enclosure AC Input for the Enterprise Series or Intelligent Rack............................................. 128
Warranty information..........................................................................130
Belarus Kazakhstan Russia marking........................................................................................ 130
Turkey RoHS material content declaration............................................................................... 131
4

Ukraine RoHS material content declaration..............................................................................131
5

© Copyright 2015, 2018 Hewlett Packard Enterprise Development LP
Notices
The information contained herein is subject to change without notice. The only warranties for Hewlett
Packard Enterprise products and services are set forth in the express warranty statements accompanying
such products and services. Nothing herein should be construed as constituting an additional warranty.
Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained
herein.
Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession,
use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer
Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government
under vendor's standard commercial license.
Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard
Enterprise has no control over and is not responsible for information outside the Hewlett Packard
Enterprise website.
Acknowledgments
Intel®, Itanium®, Pentium®, Xeon®, Intel Inside®, and the Intel Inside logo are trademarks of Intel
Corporation in the U.S. and other countries.
Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated.
Java® and Oracle® are registered trademarks of Oracle and/or its affiliates.
UNIX® is a registered trademark of The Open Group.

About This Document
This guide provides an overview of HPE Integrity NonStop X NS7 systems, specifications for planning
system installation, and is intended for personnel who have completed Hewlett Packard Enterprise
training on NonStop X system support.
Supported Release Version Updates (RVUs)
This publication supports L15.08 and all subsequent L-series RVUs until otherwise indicated in a
replacement publication.
New and Changed Information in 799257–005
This edition introduces the new:
•HPE Integrity NonStop X NS7 X3 system
• HPE Integrity NonStop X NS3 Carrier-Grade (CG) X3 system
• HPE NonStop X Gen 10 CLIM
About This Document 7

HPE Integrity NonStop X NS7 Systems
The HPE Integrity NonStop X NS7 system family introduces Intel® Xeon® x86 technology to NonStop by
using a new high bandwidth, low latency InfiniBand system interconnect that is fully-integrated with the
fault-tolerant HPE NonStop Operating system.
Table 1: Characteristics of the NS7 X1 introduced on L15.02
Processor/Processor model Intel® Xeon® x86 processors
Supported RVU for the
system
L15.02 and later RVUs
2-, 4-, and 6-core software
licensing options
Supported
Core licensing file This file is required; see Core Licensing on page 11
Minimum CLIM DVD
version required for RVU
See the CLuster I/O Module (CLIM) Software Compatibility Guide
(L15.02+) for supported version
NOTE: This file is preinstalled on new systems
Rack 36U or 42U
Processors 2 to 16 processors configured in pairs
Memory 64GB, 128GB, and 192GB memory configurations
KMSF See Planning Kernel Managed Swap (KMS) Space on page 68
Maximum CLIMs in a 16
CPU NonStop X system
56 CLuster I/O Modules (CLIMs) — Storage, IP, or Telco
Minimum CLIMs for fault-
tolerance • 2 Storage CLIMs
•2 Networking CLIMs (IP or Telco)
Maximum SAS disk
enclosures per Storage
CLIM pair
A Storage CLIM pair supports a maximum of 4 SAS disk enclosures
Maximum SAS disk drives 100 per Storage CLIM pair
Tape support through
Storage CLIMs
HPE LTO6 Tape Data Cartridge, HPE NonStop BackBox VTC, HPE
NonStop BackBox VTR, and HPE Virtualized BackBox
Minimum/maximum IO
Expansion IB Switches
0 to 4 (2 pairs)
ESS support through
Storage CLIMs
HPE XP 7 Storage Array and HPE XP P9500 Storage Array
Maintenance LAN Redundant configuration only
Minimum NonStop System
Consoles for fault-tolerance
2
Connection to NonStop X
Cluster Solution
Supported. For more information, see the NonStop X Cluster Solution
Manual
8 HPE Integrity NonStop X NS7 Systems

The following illustration shows two example configurations for AC power NS7 systems.
Figure 1: Example NS7 System Configurations (42U and 36U)
HPE Integrity NonStop X NS7 Systems 9

Table 2: Characteristics of the NS7 X2 introduced on L16.05
Processor/Processor model Intel® Xeon® x86 processors
Supported RVU for the
system
L16.05 and later RVUs
2-, 4-, and 6-core software
licensing options
Supported
Core licensing file This file is required; see Core Licensing on page 11
Minimum CLIM DVD
version required for RVU
See the CLuster I/O Module (CLIM) Software Compatibility Guide
(L15.02+) for supported version.
NOTE: This file is preinstalled on new systems.
Rack 36U or 42U
Processors 2 to 16 processors configured in pairs
Memory 64GB, 128GB, and 192GB memory configurations
Kernel Managed Swap
Facility
See Planning Kernel Managed Swap (KMS) Space on page 68
Maximum CLIMs in a 16
CPU NonStop X system
56 CLuster I/O Modules (CLIMs) — Storage, IP, or Telco
Minimum CLIMs for fault-
tolerance • 2 Storage CLIMs
•2 Networking CLIMs (IP or Telco)
Maximum SAS disk
enclosures per Storage
CLIM pair
A Storage CLIM pair supports a maximum of 4 SAS disk enclosures
Maximum SAS disk drives 100 per Storage CLIM pair.
Tape support through
Storage CLIMs
HPE LTO6 Tape Data Cartridge, HPE NonStop BackBox VTC, HPE
NonStop BackBox VTR, and HPE Virtualized BackBox
Minimum/maximum IO
Expansion IB Switches
0 to 4 (2 pairs)
ESS support through
Storage CLIMs
HPE XP 7 Storage Array and HPE XP P9500 Storage Array
Maintenance LAN Redundant configuration only
Minimum NonStop System
Consoles for fault-tolerance
2
Connection to NonStop X
Cluster Solution
Supported. For more information, see the NonStop X Cluster Solution
Manual
10 HPE Integrity NonStop X NS7 Systems

Table 3: Characteristics of the NS7 X3 introduced on L18.08
Processor/Processor model Intel® Xeon® x86 processors
Supported RVU for the
system
L18.08 and later RVUs
2-, 4-, and 6-core software
licensing options
Supported
Core licensing file This file is required; see Core Licensing on page 11
Minimum CLIM DVD
version required for RVU
See the CLuster I/O Module (CLIM) Software Compatibility Guide
(L15.02+) for supported version.
NOTE: This file is preinstalled on new systems.
Rack 36U or 42U
Processors 2 to 16 processors configured in pairs
Memory 64GB, 128GB, and 256GB memory configurations
Kernel Managed Swap
Facility
See Planning Kernel Managed Swap (KMS) Space on page 68
Maximum CLIMs in a 16
CPU NonStop X system
56 CLuster I/O Modules (CLIMs) — Storage, IP, or Telco
Minimum CLIMs for fault-
tolerance • 2 Storage CLIMs
•2 Networking CLIMs (IP or Telco)
Maximum SAS disk
enclosures per Storage
CLIM pair
A Storage CLIM pair supports a maximum of 4 SAS disk enclosures
Maximum SAS disk drives 100 per Storage CLIM pair
Tape support through
Storage CLIMs
HPE LTO6 Tape Data Cartridge, HPE NonStop BackBox VTC, HPE
NonStop BackBox VTR, and HPE Virtualized BackBox
Minimum/maximum IO
Expansion IB Switches
0 to 4 (2 pairs)
ESS support through
Storage CLIMs
HPE XP 7 Storage Array and HPE XP P9500 Storage Array
Maintenance LAN Redundant configuration only
Minimum NonStop System
Consoles for fault-tolerance
2
Connection to NonStop X
Cluster Solution
Supported. For more information, see the NonStop X Cluster Solution
Manual
Core Licensing
A core license file is required for the system and is automatically included with new NonStop X systems
starting with L15.02 and later. NS7 systems support 2-, 4-, and 6-core license options.
Anytime you upgrade the level of cores, expand your system by adding server blades, or migrate the
system, you must update your license file. Your service provider is responsible for obtaining and installing
HPE Integrity NonStop X NS7 Systems 11

this license on your behalf. You will experience a system alarm and dialout if the license file is missing
from your system.
NonStop X NS7 Standard and Optional Hardware
•c7000 Enclosure on page 12
•NonStop X NS7 Server Blades on page 13
•CLuster I/O Modules (CLIMs) on page 13
•SAS Disk Enclosures on page 21
•Maintenance Switch on page 23
•NonStop X FDR IB ADI Switch on page 23
•NonStop IO Expansion IB Switch on page 22
•NonStop System Console on page 23
•UPS and ERM (Optional) on page 24
•Enterprise Storage System (Optional) on page 24
c7000 Enclosure
The c7000 enclosure unifies NonStop X server blades and redundant high-bandwidth InfiniBand
interconnects in a 10U footprint and features:
•Up to 16 half-height NonStop X Server Blades in the c7000 enclosure – configured in pairs.
• Two Interconnect Ethernet switches that provide redundant Maintenance LAN connections for HSS
bootcode download.
• Two Interconnect InfiniBand switches that provide IB connectivity between processors and I/O
infrastructure.
• An Intelligent Infrastructure that supports enhanced midplane signal integrity and compatibility with
HPE Insight Control.
• Two Onboard Administrator (OA) modules manage and monitor the Intelligent Infrastructure and let
you monitor and control resources using the HPE Insight Display as described in the HPE
BladeSystem Onboard Administrator User Guide.
12 HPE Integrity NonStop X NS7 Systems

NonStop X NS7 Server Blades
An NS7 system achieves full software fault tolerance by running the NonStop operating system on the
NonStop X NS7 Server Blades.
NS7 Server Blade characteristics
• Half-height server blade that features Intel Xeon processors and an InfiniBand
interface mezzanine card to provide InfiniBand fabric connectivity
•Provides a maximum of 192 GB of memory per server blade
• One HPE 10Gb dual-port FlexibleLOM Ethernet Adapter
• One Infiniband FDR dual-port Host Channel Adapter (HCA)
• Environment Monitoring Services to OA
• Disk bays and Smart Array Controller are not used
NOTE: Different sever blade models cannot coexist in the same system. For example, a
BL460c Gen8 and a Gen9 server blade cannot coexist in the same system.
NS7 system Ships with
NS7 X3 BL460c Gen10 server blades
NS7 X2 BL460c Gen9 server blades
NS7 X1 BL460c Gen8 server blades
CLuster I/O Modules (CLIMs)
NS7 systems support the NS7 Storage CLIMs on page 19, NS7 Gen9 IP CLIM and Telco CLIM on
page 16 which function as I/O or Ethernet adapters and are managed by the Cluster I/O Protocols (CIP)
subsystem.
To identify a CLIM, see the number on the rear label; this number is listed as the part number in OSM.
NS7 system Ships with
NS7 X3 Gen10 CLIMs
NS7 X2 Gen9 CLIMs
NS7 X1 Gen8 CLIMs
HPE Integrity NonStop X NS7 Systems 13

NS7 IP CLIM and Telco CLIM
The IP CLIM and Telco CLIM are sometimes referred to as Networking CLIMs. These CLIMs function as
10 Gigabit Ethernet (10GbE) adapters and provide five Ethernet ports with configuration options of all
copper (Option 1) or fiber/copper (Option 2).
The NS7 supports three generations of IP/Telco CLIMs: Gen10, Gen9, and Gen8.
NS7 Gen10 IP and Telco CLIMs
NS7 Gen10 IP/Telco CLIM Option 1 — Four 10GBase-T and One 1GBase-T Interfaces
Item Characteristics of NS7 Gen10 IP or Telco CLIM
Slot 1 InfiniBand interface card provides InfiniBand X-fabric and Y-fabric connections.
Slot 2 10GbE 2-port adapter copper NIC for Eth1 and Eth2 customer interfaces.
Slot 3 10GbE 2-port adapter copper NIC for Eth3 and Eth4 customer interfaces.
LAN1 - LAN4 • LAN1 is reserved for Maintenance LAN interface for maintenance support.
•LAN2 provides 1GbE port for Eth5 interface.
• LAN3 and LAN4 are not used.
iLO Maintenance LAN interface.
14 HPE Integrity NonStop X NS7 Systems

NS7 Gen10 IP/Telco CLIM Option 2 — Four 10GBase-SR and One 1GBase-T Interfaces
Item Characteristics of NS7 Gen10 IP or Telco CLIM
Slot 1 InfiniBand interface card provides InfiniBand X-fabric and Y-fabric connections.
Slot 2 10GbE 2-port adapter for Eth1 and Eth2 customer interfaces.
Slot 3 10GbE 2-port adapter for Eth3 and Eth4 customer interfaces.
LAN1 - LAN4 • LAN1 is reserved for Maintenance LAN interface for maintenance support.
•LAN2 provides 1GbE port for Eth5 interface.
• LAN3 and LAN4 are not used.
iLO Maintenance LAN interface.
HPE Integrity NonStop X NS7 Systems 15

NS7 Gen9 IP CLIM and Telco CLIM
NS7 Gen9 IP/Telco Gen9 CLIM Option 1 — Four 10GBase-T and One 1GBase-T Interfaces
Item Characteristics
Slot 1 InfiniBand interface card provides InfiniBand X-fabric and Y-fabric connections.
Slot 2 10GbE 2-port adapter copper NIC for Eth1 and Eth2 customer interfaces.
Slot 3 10GbE 2-port adapter copper NIC for Eth3 and Eth4 customer interfaces.
LAN1 - LAN4 • LAN1 is reserved for Maintenance LAN interface for maintenance support.
•LAN2 provides 1GbE port for Eth5 interface.
• LAN3 and LAN4 are not used.
iLO Maintenance LAN interface.
16 HPE Integrity NonStop X NS7 Systems

NS7 IP/Telco Gen9 CLIM Option 2 — Four 10GBase-SR and One 1GBase-T Interfaces
Item Characteristics
Slot 1 InfiniBand interface card provides InfiniBand X-fabric and Y-fabric connections.
Slot 2 10GbE 2-port adapter for Eth1 and Eth2 customer interfaces.
Slot 3 10GbE 2-port adapter for Eth3 and Eth4 customer interfaces.
LAN1 - LAN4 • LAN1 is reserved for Maintenance LAN interface for maintenance support.
•LAN2 provides 1GbE port for Eth5 interface.
• LAN3 and LAN4 are not used.
iLO Maintenance LAN interface.
HPE Integrity NonStop X NS7 Systems 17

NS7 Gen8 IP CLIM and Telco CLIM
NS7 Gen8 IP or Telco CLIM Option 1 — Four 10GBase-T and One 1GBase-T
Interface Characteristics of Gen8 IP or Telco CLIM
Slot 1 InfiniBand interface card which provides the IB fabric connections
Slot 2 10GbE 2-port adapter for Eth4 and Eth3 customer ports
Slot 3 1GbE 2-port adapter for Eth5 customer port and Eth0 for maintenance support.
FlexLOM 10GbE 2-port adapter for Eth2 and Eth1 customer ports
IP or Telco CLIM Option 2 — Four 10GBase-SR and One 1GBase-T
18 HPE Integrity NonStop X NS7 Systems

Interface Characteristics of Gen8 IP or Telco CLIM
Slot 1 InfiniBand interface card which provides the IB fabric connections
Slot 2 10GbE 2-port adapter for Eth4 and Eth3 customer ports
Slot 3 1GbE 2-port adapter for Eth5 customer port and Eth0 for maintenance support.
FlexLOM 10GbE 2-port adapter for Eth2 and Eth1 customer ports
CLIM patch panel
CLIM Cable Management Patch Panels
The HPE CLIM uses two Cable Management patch panels for RJ45 and LC (optical) connections. The
RJ45 patch panel is shown below. Both are preinstalled in new systems. For more information, refer your
service provider to the CLuster I/O (CLIM) Installation and Configuration Guide (15.02+).
NS7 Storage CLIMs
A Storage CLIM functions as an I/O adapter supporting SAS disk drives and SAS tapes and optionally
ESS and FC tape devices using 3 PCIe HBA slots.
Item Characteristics of Gen10 Storage CLIM
Slot 1 InfiniBand interface card provides InfiniBand X-fabric and Y-fabric connections.
Slot 2 SAS HBA with two 12G SAS ports: 1E, 2E.
Table Continued
HPE Integrity NonStop X NS7 Systems 19

Item Characteristics of Gen10 Storage CLIM
Slot 3 Optional order of SAS HBA with two 12G SAS ports or FC HBA with 16Gb FC ports.
iLO Provides maintenance services and connects to Maintenance LAN.
LAN1 - LAN4 • LAN1 is reserved for Maintenance LAN interface for maintenance support.
•LAN2 provides 1GbE port for Eth1 interface to support ESKM (optional).
• LAN3 provides 1GbE port for Eth2 interface to support Virtualized BackBox.
• LAN4 is not used.
Item Characteristics of Gen9 Storage CLIM
Slot 1 InfiniBand interface card provides InfiniBand X-fabric and Y-fabric connections.
Slot 2 SAS HBA with two 12G SAS ports: 1E, 2E.
Slot 3 Optional order of SAS HBA with two 12G SAS ports or FC HBA with 16Gb FC ports.
iLO Provides maintenance services and connects to Maintenance LAN.
LAN1 - LAN4 • LAN1 is reserved for Maintenance LAN interface for maintenance support.
• LAN2 provides 1GbE port for Eth1 interface to support ESKM (optional).
• LAN3 and LAN4 are not used.
20 HPE Integrity NonStop X NS7 Systems