Hewlett Packard Enterprise ProLiant DL380 Gen10 Plus User manual

HPE ProLiant DL380 Gen10 Plus Server User Guide
Part Number: 30-13BA80FB-001
Published: May 2021
Edition: 1
Abstract
This document is for the person who installs, administers, and troubleshoots servers and storage systems. Hewlett
Packard Enterprise assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards
in products with hazardous energy levels.

©Copyright 2021 Hewlett Packard Enterprise Development LP
Notices
The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise
products and services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable
for technical or editorial errors or omissions contained herein.
Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or copying.
Consistent with FAR 12211 and 12212, Commercial Computer Software, Computer Software Documentation, and
Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.
Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard Enterprise has no
control over and is not responsible for information outside the Hewlett Packard Enterprise website.
Acknowledgments
Intel®, Itanium®, Optane™, Pentium®, Xeon®, Intel Inside®, and the Intel Inside logo are trademarks of Intel Corporation
in the U.S. and other countries.
Microsoft®, Windows®, and Windows Server®are either registered trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries.
Linux®is the registered trademark of Linus Torvalds in the U.S. and other countries.
VMware ESXi™and VMware vSphere®are registered trademarks or trademarks of VMware, Inc. in the United States
and/or other jurisdictions.
Red Hat®Enterprise Linux®are registered trademarks of Red Hat, Inc. in the United States and other countries.
microSD®is a trademark or a registered trademark of SD-3D in the United States, other countries of both.
All third-party marks are property of their respective owners.

Contents
Component identification................................................................................................ 8
Front panel components..............................................................................................................................................................................................8
Front panel LEDs and buttons..............................................................................................................................................................................10
UID button functionality..........................................................................................................................................................................14
Front panel LED power fault codes..................................................................................................................................................14
Systems Insight Display LEDs............................................................................................................................................................. 15
Systems Insight Display combined LED descriptions............................................................................................................16
Rear panel components............................................................................................................................................................................................ 18
Rear panel LEDs............................................................................................................................................................................................................ 19
System board components..................................................................................................................................................................................... 20
Heatsink and socket components..................................................................................................................................................... 21
DIMM label identification........................................................................................................................................................................21
Intel Optane persistent memory 200 series for HPE label identification.................................................................. 23
DIMM slot locations....................................................................................................................................................................................23
System maintenance switch descriptions.....................................................................................................................................24
Drive box identification.............................................................................................................................................................................................25
Drive numbering............................................................................................................................................................................................................27
HPE Basic Drive LED definitions......................................................................................................................................................................... 29
Fan bay numbering......................................................................................................................................................................................................31
DSC-252-port SFP28 card ports and LEDs.................................................................................................................................................31
HPE NS204i-p NVMe OS Boot Device components................................................................................................................................ 33
HPE NS204i-p NVMe OS Boot Device LED definitions......................................................................................................................... 33
Operations........................................................................................................................ 34
Power up the server.................................................................................................................................................................................................... 34
Power down the server..............................................................................................................................................................................................34
Extending the server from the rack................................................................................................................................................................... 34
Secure cables using the cable management arm.......................................................................................................................................35
Removing the server from the rack....................................................................................................................................................................36
Remove the access panel.........................................................................................................................................................................................37
Install the access panel..............................................................................................................................................................................................37
Removing the fan cage..............................................................................................................................................................................................37
Installing the fan cage................................................................................................................................................................................................38
Removing the air bale or midplane drive cage.........................................................................................................................................39
Installing the air bale............................................................................................................................................................................................... 41
Removing a riser cage................................................................................................................................................................................................41
Removing a riser slot blank.....................................................................................................................................................................................42
Removing the hard drive blank............................................................................................................................................................................ 43
Releasing the cable management arm ............................................................................................................................................................44
Accessing the Systems Insight Display............................................................................................................................................................44
Setup..................................................................................................................................46
Optional services...........................................................................................................................................................................................................46
Set up the server...........................................................................................................................................................................................................46
Operational requirements...................................................................................................................................................................... 49
Server warnings and cautions..............................................................................................................................................................52
3

Rack warnings............................................................................................................................................................................................... 53
Electrostatic discharge.............................................................................................................................................................................53
Server box contents...................................................................................................................................................................................54
Installing hardware options ..................................................................................................................................................................54
POST screen options.................................................................................................................................................................................54
Installing or deploying an operating system...............................................................................................................................54
Registering the server.............................................................................................................................................................................. 55
Hardware options installation...................................................................................... 56
Product QuickSpecs.................................................................................................................................................................................................... 56
Introduction......................................................................................................................................................................................................................56
Installing a fan filter into the security bezel..................................................................................................................................................56
Installing the bezel and bezel lock......................................................................................................................................................................57
Power supply options.................................................................................................................................................................................................57
Hot-plug power supply calculations................................................................................................................................................ 57
Installing a redundant hot-plug power supply...........................................................................................................................57
Installing the HPE 800 W Flex Slot -48 VDC hot-plug power supply..........................................................................59
Installing the HPE 1600 W Flex Slot -48 VDC hot-plug power supply.......................................................................65
Connecting a DC power cable to a DC power source.............................................................................................................69
Energy pack options................................................................................................................................................................................................... 70
HPE Smart Storage Battery.................................................................................................................................................................. 70
HPE Smart Storage Hybrid Capacitor.............................................................................................................................................71
Minimum firmware versions..................................................................................................................................................................71
Installing an energy pack........................................................................................................................................................................71
Memory options.............................................................................................................................................................................................................72
Memory population information.........................................................................................................................................................72
DIMM-processor compatibility............................................................................................................................................................ 72
HPE SmartMemory speed information...........................................................................................................................................72
Installing a DIMM blank........................................................................................................................................................................... 72
Installing a DIMM.........................................................................................................................................................................................73
Intel Optane persistent memory 200 series for HPE.............................................................................................................74
Fan options.......................................................................................................................................................................................................................78
Installing high-performance fans.......................................................................................................................................................79
Drive options................................................................................................................................................................................................................... 80
Drive guidelines............................................................................................................................................................................................81
Installing a hot-plug SAS, SATA or NVMe drive....................................................................................................................... 81
Installing an M.2 drive.............................................................................................................................................................................. 83
Installing a Universal Media Bay..........................................................................................................................................................................84
Storage controller options.......................................................................................................................................................................................86
Installing a storage controller.............................................................................................................................................................. 87
Riser and riser cage options................................................................................................................................................................................... 88
Installing primary and secondary risers......................................................................................................................................... 88
Installing tertiary risers............................................................................................................................................................................89
Installing a secondary riser cage........................................................................................................................................................91
Installing a tertiary riser cage.............................................................................................................................................................. 92
Expansion slots.............................................................................................................................................................................................................. 95
Supported PCIe form factors................................................................................................................................................................95
Installing expansion boards.................................................................................................................................................................. 96
Accelerator options....................................................................................................................................................................................98
Drive cage options.................................................................................................................................................................................................... 102
Installing a front 8NVMe drive cage............................................................................................................................................. 102
Installing a front 8 SFF SAS/SATA drive cage in box 1.....................................................................................................104
Installing a front 8 SFF SAS/SATA drive cage in box 2.....................................................................................................106
Installing a front/tertiary 2 SFF NVMe/SAS/SATA stackable drive cage...............................................................107
4

Installing a midplane drive cage......................................................................................................................................................110
Installing a rear 2 SFF SAS/SATA drive cage in the primary or secondary riser................................................113
Installing a rear 2 SFF SAS/SATA drive cage over the power supplies................................................................... 116
Installing a rear 2LFF SAS/SATA drive cage in the primary or secondary riser.................................................119
Processor and heatsink options........................................................................................................................................................................121
Installing a processor heatsink assembly...................................................................................................................................121
Installing a high performance heatsink....................................................................................................................................... 123
Installing the chassis intrusion detection switch.....................................................................................................................................127
Installing an OCP 30 adapter card.................................................................................................................................................................128
Installing the Pensando DSP DSC-252p SFP28 card......................................................................................................................... 130
Installing the HPE NS204i-p NVMe OS Boot Device option............................................................................................................131
Installing a rear serial port interface...............................................................................................................................................................133
Installing the Systems Insight Display...........................................................................................................................................................134
HPE Trusted Platform Module 20 Gen10 Plus option.......................................................................................................................136
Overview........................................................................................................................................................................................................136
HPE Trusted Platform Module 20 guidelines........................................................................................................................137
Installing and enabling the HPE TPM 20 Gen10 Plus option...................................................................................... 137
Cabling............................................................................................................................ 143
Cabling guidelines..................................................................................................................................................................................................... 143
Power cabling...............................................................................................................................................................................................................144
Cable routing: Front 8SFF power cabling.................................................................................................................................. 145
Cable routing: Front 12LFF power cabling............................................................................................................................... 145
Cable routing: Midplane power cabling.......................................................................................................................................146
Cable routing: Front 2SFF side-by-side power cabling......................................................................................................147
Cable routing: Rear 2SFF power cabling.................................................................................................................................... 147
Cabling diagrams....................................................................................................................................................................................................... 148
Cable routing: 2NVMe box 6 to AROC NVMe adpater...................................................................................................... 150
Cable routing: 6NVMe box 3 to 3-port primary riser..........................................................................................................151
Cable routing: 6NVMe box 3 to 3-port primary riser..........................................................................................................151
Cable routing: 8NVMe balanced box 2 to system board..................................................................................................152
Cable routing: 8NVMe P2 box 1 to system board/secondary riser............................................................................152
Cable routing: 8NVMe P1 box 3 to system board/primary riser..................................................................................153
Cable routing: 12NVMe BAL P1 box 2+3 to system board/primary riser/OCP NVMe adapter/
Type-a controller......................................................................................................................................................................................153
Cable routing: 12NVMe BAL P2 box 1+2 to system board/4-port NVMe secondar riser............................154
Cable routing: 12NVMe DIFF P1 box 2+3 to system board/4-port NVMe primary riser..............................154
Cable routing: 12NVMe DIFF P1 box 1+2 to system board/4-port NVMe secondary riser........................155
Cable routing: 24NVMe Balanced.................................................................................................................................................. 155
Cable routing: 24NVMe Dierential..............................................................................................................................................156
Cable routing: 8NVMe box 3 to 4-port primary riser..........................................................................................................156
Cable routing: 8NVMe box 1 to 4-port secondary riser....................................................................................................157
Cable routing: 8NVMe box 1+2 to type-a controller.......................................................................................................... 157
Cable routing: 8SFF box 2 to type-a controller......................................................................................................................158
Cable routing: 8SFF box 3 to 2-port primary type-p controller................................................................................... 158
Cable routing: 8SFF box 2 to 2-port primary type-p controller ..................................................................................159
Cable routing: 2SFF side-by-side to primary type-p controller.................................................................................... 159
Cable routing: 8SFF 4-port box 1 to 4-port secondary type-p controller..............................................................160
Cable routing: 8SFF 4-port box 2 to 4-port primary type-p controller....................................................................160
Cable routing: 8SFF 4-port box 3 to 4-port primary type-p controller....................................................................161
Cable routing: 8SFF box 1+2+3 to 4-port secondary type-p controller................................................................. 161
Cable routing: 8SFF box 1+2+3 to 4-port primary type-p controller....................................................................... 162
Cable routing: 4LFF SAS/SATA box 7 to 4-port type-a controller.............................................................................162
Cable routing: Front I/O cabling........................................................................................................................................................................163
5

Cable routing: Serial port.......................................................................................................................................................................................167
Cable routing: OCP NVMe enablement.........................................................................................................................................................168
Software and configuration utilities......................................................................... 169
Server mode..................................................................................................................................................................................................................169
Product QuickSpecs................................................................................................................................................................................................. 169
Active Health System Viewer............................................................................................................................................................................. 169
Active Health System............................................................................................................................................................................ 169
HPE iLO 5.......................................................................................................................................................................................................................170
iLO Federation........................................................................................................................................................................................... 171
iLO Service Port........................................................................................................................................................................................ 171
iLO RESTful API........................................................................................................................................................................................ 172
RESTful Interface Tool..........................................................................................................................................................................172
iLO Amplifier Pack...................................................................................................................................................................................172
Integrated Management Log..............................................................................................................................................................................172
Intelligent Provisioning.......................................................................................................................................................................................... 173
Management security..............................................................................................................................................................................................173
Scripting Toolkit for Windows and Linux.................................................................................................................................................... 173
HPE Message Passing Interface........................................................................................................................................................................174
HPE Performance Cluster Manager................................................................................................................................................................174
UEFI System Utilities............................................................................................................................................................................................... 174
Selecting the boot mode .....................................................................................................................................................................174
Secure Boot..................................................................................................................................................................................................175
Launching the Embedded UEFI Shell ..........................................................................................................................................176
HPE Smart Storage Administrator.................................................................................................................................................................. 176
Smart Storage Administrator............................................................................................................................................................177
HPE InfoSight for servers ....................................................................................................................................................................................177
USB support..................................................................................................................................................................................................................177
External USB functionality..................................................................................................................................................................177
Redundant ROM support...................................................................................................................................................................................... 178
Safety and security benefits.............................................................................................................................................................. 178
Keeping the system current................................................................................................................................................................................ 178
Updating firmware or system ROM...............................................................................................................................................178
Drivers.............................................................................................................................................................................................................180
Software and firmware..........................................................................................................................................................................181
Operating system version support................................................................................................................................................ 181
HPE Pointnext Portfolio.......................................................................................................................................................................181
Proactive notifications...........................................................................................................................................................................181
Troubleshooting............................................................................................................182
NMI functionality........................................................................................................................................................................................................182
Troubleshooting resources..................................................................................................................................................................................182
Battery replacement.................................................................................................... 183
Specifications.................................................................................................................185
Environmental specifications..............................................................................................................................................................................185
Mechanical specifications......................................................................................................................................................................................185
Power supply specifications................................................................................................................................................................................ 186
HPE 800 W Flex Slot Universal Hot-plug Low Halogen Power Supply................................................................... 186
HPE 800 W Flex Slot Platinum Hot-plug Low Halogen Power Supply....................................................................187
6

HPE 800 W Flex Slot Titanium Hot-plug Low Halogen Power Supply....................................................................188
HPE 800 W Flex Slot -48 VDC Hot-plug Low Halogen Power Supply.....................................................................189
HPE 1600 W Flex Slot Platinum Hot-plug Low Halogen Power Supply.................................................................190
HPE 1600 W Flex Slot -48 VDC Hot-plug Power Supply................................................................................................ 191
Support and other resources...................................................................................... 192
Accessing Hewlett Packard Enterprise Support..................................................................................................................................... 192
Accessing updates.................................................................................................................................................................................................... 192
Remote support..........................................................................................................................................................................................................193
Warranty information..............................................................................................................................................................................................193
Regulatory information.......................................................................................................................................................................................... 193
Documentation feedback......................................................................................................................................................................................194
7

Component identification
Front panel components
SFF front panel components
Item Description
1 Box 1 (optional drives or universal media bay)
2 Box 2 (optional drives)
3 Box 3 Drives 1-8
4 Serial number/iLO information pull tab or optional Systems Insight Display
5 iLO Service port
6 USB 30 port
Universal media bay components
Item Description
1 USB 20 port
2 Video display port
3 Optical disc drive (optional)
4 Drives (optional)
Component identification 8

12-drive LFF front panel components
Item Description
1 Drive bays or Optical/video/USB (optional)
2 Drive bays (optional)
3 Drive bays
8-drive LFF model front panel components
Item Description
1 2 SFF module (optional)
2 LFF power switch module
3 Drive bays
LFF power switch module components
Component identification 9

Item Description
1 Optical disk drive
2 Serial number/iLO information pull tab
3 USB 30 port
4 iLO Service port
5 Display port
Front panel LEDs and buttons
SFF front panel LEDs and buttons
Item Description Status
1 UID button/LED1• Solid blue = Activated
• Flashing blue:
◦1 Hz/cycle per sec = Remote management or firmware
upgrade in progress
◦4 Hz/cycle per sec = iLO manual reboot sequence
initiated
◦8 Hz/cycle per sec = iLO manual reboot sequence in
progress
◦O = Deactivated
2NIC status LED 1• Solid green = Link to network
• Flashing green (1 Hz/cycle per sec) = Network active
•O = No network activity
Table Continued
Component identification 10

Item Description Status
3 Health LED1• Solid green = Normal
• Flashing green (1 Hz/cycle per sec) = iLO is rebooting
• Flashing amber = System degraded
• Flashing red (1 Hz/cycle per sec) = System critical2
4 Power On/Standby button and
system power LED1
• Solid green = System on
• Flashing green (1 Hz/cycle per sec) = Performing power on
sequence
• Solid amber = System in standby
•O = No power present3
1 When all four LEDs described in this table flash simultaneously, a power fault has occurred.
2 If the health LED indicates a degraded or critical state, review the system IML or use iLO to review the system health status.
3 Facility power is not present, the power cord is not attached, no power supplies are installed, power supply failure has occurred, or the
power button cable is disconnected.
12 LFF front panel LEDs and buttons
Component identification 11

Item Description Status
1 UID button/LED1• Solid blue = Activated
• Flashing blue:
◦1 Hz/cycle per sec = Remote management or firmware
upgrade in progress
◦4 Hz/cycle per sec = iLO manual reboot sequence
initiated
◦8 Hz/cycle per sec = iLO manual reboot sequence in
progress
•O = Deactivated
2NIC status LED1• Solid green = Link to network
• Flashing green (1 Hz/cycle per sec) = Network active
•O = No network activity
3 Power On/Standby button and
system power LED1
• Solid green = System on
• Flashing green (1 Hz/cycle per sec) = Performing power on
sequence
• Solid amber = System in standby
•O = No power present2
4 Health LED1• Solid green = Normal
• Flashing green (1 Hz/cycle per sec) = iLO is rebooting
• Flashing amber = System degraded
• Flashing red (1 Hz/cycle per sec) = System critical3
1 When all four LEDs described in this table flash simultaneously, a power fault has occurred.
2 Facility power is not present, the power cord is not attached, no power supplies are installed, power supply failure has occurred, or the
power button cable is disconnected.
3 If the health LED indicates a degraded or critical state, review the system IML or use iLO to review the system health status.
Component identification 12

LFF power switch module LEDs and buttons
Item Description Status
1 UID button/LED1• Solid blue = Activated
• Flashing blue:
◦1 Hz/cycle per sec = Remote management or firmware
upgrade in progress
◦4 Hz/cycle per sec = iLO manual reboot sequence
initiated
◦8 Hz/cycle per sec = iLO manual reboot sequence in
progress
•O = Deactivated
2NIC status LED1• Solid green = Link to network
• Flashing green (1 Hz/cycle per sec) = Network active
•O = No network activity
Table Continued
Component identification 13

Item Description Status
3 Health LED1• Solid green = Normal
• Flashing green (1 Hz/cycle per sec) = iLO is rebooting
• Flashing amber = System degraded
• Flashing red (1 Hz/cycle per sec) = System critical2
4 Power On/Standby button and
system power LED1
• Solid green = System on
• Flashing green (1 Hz/cycle per sec) = Performing power on
sequence
• Solid amber = System in standby
•O = No power present3
1 When all four LEDs described in this table flash simultaneously, a power fault has occurred.
2 If the health LED indicates a degraded or critical state, review the system IML or use iLO to review the system health status.
3 Facility power is not present, the power cord is not attached, no power supplies are installed, power supply failure has occurred, or the
power button cable is disconnected.
UID button functionality
The UID button can be used to display the Server Health Summary when the server will not power on. For more
information, see the latest HPE iLO 5 User Guide on the Hewlett Packard Enterprise website.
Front panel LED power fault codes
The following table provides a list of power fault codes, and the subsystems that are aected. Not all power faults are
used by all servers.
Subsystem LED behavior
System board 1 flash
Processor 2 flashes
Memory 3 flashes
Riser board PCIe slots 4 flashes
OCP adapter 5 flashes
Storage controller 6 flashes
System board PCIe slots 7 flashes
Power backplane 8 flashes
Storage backplane 9 flashes
Power supply 10 flashes
PCIe expansion cards installed in riser board 11 flashes
Chassis 12 flashes
GPU card 13 flashes
Component identification 14

Systems Insight Display LEDs
The Systems Insight Display LEDs represent the system board layout. The display enables diagnosis with the access panel
installed.
Description Status
Processor LEDs O = Normal
Amber = Failed processor
DIMM LEDs O = Normal
Amber = Failed DIMM or configuration issue
Fan LEDs O = Normal
Amber = Failed fan or missing fan
NIC LEDs1
O = No link to network
Solid green = Network link
Flashing green = Network link with activity
If power is o, the front panel LED is not active. For status,
see Rear panel LEDs.
Power supply LEDs O = Normal
Solid amber = Power subsystem degraded, power supply
failure, or input power lost.
Table Continued
Component identification 15

Description Status
PCI riser LED O = Normal
Amber = Incorrectly installed PCI riser cage
Over temp LED O = Normal
Amber = High system temperature detected
Power cap LED O = System is in standby, or no cap is set.
Solid green = Power cap applied
Amp Status LED O = AMP modes disabled
Solid green = AMP mode enabled
Solid amber = Failover
Flashing amber = Invalid configuration
1 Embedded NIC ports are not equipped on the server. NIC LEDs on the Systems Insight Display will flash based on the network adapter
port activity. In the case of a dual-port adapters, only NIC LED 1 and 2 will illuminate to correspond with the activity of the respective
network ports.
When the health LED on the front panel illuminates either amber or red, the server is experiencing a health event. For
more information on the combination of these LEDs, see Systems Insight Display combined LED descriptions).
Systems Insight Display combined LED descriptions
The combined illumination of the following LEDs indicates a system condition:
• Systems Insight Display LEDs
• System power LED
• Health LED
Component identification 16

Systems Insight Display LED
and color
Health LED System power
LED
Status
Processor (amber) Red Amber One or more of the following conditions
might exist:
• Processor in socket X has failed.
• Processor X is not installed in the
socket.
• Processor X is unsupported.
• ROM detects a failed processor during
POST.
Processor (amber) Amber Green Processor in socket X is in a pre-failure
condition.
DIMM (amber) Red Green One or more DIMMs have failed.
DIMM (amber) Amber Green DIMM in slot X is in a pre-failure condition.
Over temp (amber) Amber Green The Health Driver has detected a
cautionary temperature level.
Over temp (amber) Red Amber The server has detected a hardware critical
temperature level.
PCI riser (amber) Red Green The PCI riser cage is not seated properly.
Fan (amber) Amber Green One fan has failed or has been removed.
Fan (amber) Red Green Two or more fans have failed or been
removed.
Power supply (amber) Red Amber One or more of the following conditions
might exist:
• Only one power supply is installed and
that power supply is in standby.
• Power supply fault.
• System board fault.
Power supply (amber) Amber Green One or more of the following conditions
might exist:
• Redundant power supply is installed and
only one power supply is functional.
• AC power cord is not plugged into
redundant power supply.
• Redundant power supply fault.
• Power supply mismatch at POST or
power supply mismatch through hot-
plug addition.
Table Continued
Component identification 17

Systems Insight Display LED
and color
Health LED System power
LED
Status
Power cap (o) — Amber Standby.
Power cap (green) — Flashing green Waiting for power.
Power cap (green) — Green Power is available.
Power cap (flashing amber) — Amber Power is not available.
IMPORTANT: If more than one DIMM slot LED is illuminated, further troubleshooting is required. Test each bank of
DIMMs by removing all other DIMMs. Isolate the failed DIMM by replacing each DIMM in a bank with a known
working DIMM.
Rear panel components
Item Description
1 Primary riser slots 1–3 (optional drive cage)
2 Secondary riser slots 4–6 (optional drive cage)
3 Serial port (optional)1
4 Tertiary riser slots 7–8 (optional drive cage)
5 Power supply 1
6 Power supply 2
7 Video (VGA) port
8 OCP 30 adapter (optional)
9 USB 30 connectors
10 iLO Management Port
1 When a secondary or tertiary riser cage is installed as shown, the serial port can be installed in the riser slot 8.
Component identification 18

Rear panel LEDs
Item Description Status
1 Link LED • O = No network link
• Green = Network link
2 Status LED • O = No network activity
• Solid green = Link to network
• Flashing green = Network activity
3 UID LED • O = Deactivated
• Solid blue = Activated
• Flashing blue = System is being managed remotely
4-5 Power supply LED • O = System is o or power supply has failed
• Solid green = Normal
Component identification 19

System board components
Item Description
1 x8 Slimline connector
2 TPM connector
3 System maintenance switch
4 Front display port/USB 20 connector
5 Primary (processor 1) PCIe riser connector
6 x4 SATA port 2
7 x4 SATA port 1
8 x4 SATA port 3
9 Front power/USB 30 connector
10 SATA optical port 4
11 x8 NVMe port 2A
12 x8 NVMe port 1A
Table Continued
Component identification 20