Hitron CODA Series User manual

CODA
Cable Modem
Quick Install Guide

Quick Install Guide - CODA Cable Modem 1
Step 1: Set up the Cable Modem
Find your Cable Internet Account Number and login information (your
email address or username, password) and have it ready for Step 3.
Login Username:
Login Password:
If you are replacing a Cable Modem that is currently connected in
your home, unplug the old modem and remove it from its current
location. Place this new Cable Modem in the same spot as the
previous modem. Otherwise, place the Cable Modem near a
Coax and Power Outlet.
Connect a coaxial cable (usually provided by your cable company)
from the Cable Modem to a Coax Outlet on the wall. Make sure
that the cable is tightly connected. (If you need a coaxial cable,
one has been provided in the box.)
NOTE: If Comcast XFINITY is your cable Internet provider, Comcast
XFINITY recommends connecting your cable modem directly
to a Coax wall outlet, rather than connecting it to a splitter.
Connect the Power Adapter (12V, 2A) to the Cable Modem and
then plug it into a Power Outlet.
Wait until the four LEDs on the right are SOLID GREEN or BLUE.
This may take up to 2-3 minutes.
If not, please check the Cable connection. If you believe that the
coax cables are tightly connected then please call your Cable
Internet Service Provider. It is possible that your Cable service has
not been activated.
A
B
C
D
E

Quick Install Guide - CODA Cable Modem 2
Step 2: Connecting to your Home Network
Connect the Yellow Ethernet Cable into one of the two Yellow
Ethernet Ports on the back of the Cable Modem and the other end
to the WAN Ethernet Port on your previously installed Router. If you
do not have a router, connect the Ethernet Cable to the Ethernet
port on your computer.
Make sure that the 1st LED on the left is SOLID GREEN or BLUE.
Step 3: Test Connection
Make sure that your computer, tablet or cell phone is ON and is
connected to your Router via WiFi or this Cable Modem via an
Ethernet cable.
Open a web browser. Your Cable Internet Service Provider may
automatically redirect the browser to a special website. If not,
please go to www.google.com.
If automatic activation is not available, contact your Cable Internet
Service Provider to activate this cable modem.
Tech Support
Thank you for purchasing this Hitron Cable Modem. You can visit
us.hitrontech.com/coda to get help, Frequently Asked Questions (FAQs)
and user manuals.
A
A
B
C

Quick Install Guide - CODA Cable Modem
Power...Green when powered on
Downstream...Solid Green
or Blue when connected
to a downstream channel
Upstream...Solid Green
or Blue when connected
to an upstream channel
Online...Green when connected
to your Internet Service Provider
LAN...Solid Green when a device
is connected to one of the
Ethernet ports
LEDs
Warning
This product is intended to be supplied by Certified External Power Adapter whose output meets ES1/
PS2 (LPS) and rated 12 Vdc, minimum 2.0A, minimum ambient temperature 40°C and was evaluated in
accordance to IEC 60950-1 and/or IEC 62368-1.
Disclaimer
The manufacturer assumes no liabilities with respect to the contents of this document. The manufacturer
also reserves the right to revise this document or update the content thereof without any obligation to
notify any person of such revisions or amendments.
© Hitron Technologies Americas. The Hitron name and the Hitron logo are registered trademarks of
Hitron Technologies in the US and other countries. Any non-Hitron trademarks are used for reference
purposes only.
3