Hitron CGN3 User manual

Hitron CGN3 Cable modem
[e-mail]
Contains: 1 Cable modem, 1 Ethernet cable,
1 AC Power cord (output 12V/2.5A).
Connection Guide
1. Connect coaxial cable from wall coaxial
cable jack to coaxial jack in the modem.
2. Connect AC Power Cord
Signal Synchronization
After few minutes of waiting on
signal, Power, Down Stream,
Up Stream and Online must be
steady on.
If any of top 4 lights are missing
or flashing, please contact us at
[email protected] for further
assistance.
Please note: Link and wifi may
off, flash or solid depending on
the status of your connection
or activity.
Wireless Information
Wireless information will be provided at the back of
Hitron-CGN3 unit:
Wireless Name: CGN3-XXXX-5G
Wireless Password: Serial Number