Hobo TidbiT MX Temp 400 User manual

Quick Start for the HOBO® TidbiT® MX Temp 400 (MX2203) & Temp 5000 (MX2204) Logger
1
•Download HOBOconnect® to a phone or tablet from the App
Store® or Google Play™.
•Download HOBOconnect to a Windows® computer from
www.onsetcomp.com/products/software/hoboconnect.
2 Open the app. Enable Bluetooth® in your device settings if
prompted.
3 Firmly press the magnetic HOBO button
near the center of the logger to wake it up.
Both LEDs on the logger will blink once
when it wakes up. Tap Devices in the app.
Tap the logger in the app to connect to it. If
the logger does not appear in the list, make
sure the logger is within range of your
phone, tablet, or computer.
4 Tap to set up the logger. Choose your logger settings.
Note that the default Bluetooth setting for the logger is Bluetooth
Always On, which means it will “advertise” or regularly send out a
Bluetooth signal for the phone, tablet, or computer to find via the
app. This setting uses battery power. You can change this to one
of the following power saving modes:
•Bluetooth Always Off. The logger will only advertise when you
press the HOBO button on the protective logger boot to wake
it up.
•Bluetooth Off Water Detect. The logger will only advertise
when it is out of water. When it is in water, the Bluetooth
signal is automatically disabled.
Tap to save the settings to the logger.
The logger will begin logging data based on the settings you
selected. Press the HOBO button for 3 seconds If you configured
the logger to start logging with a button push (logger LEDs will
blink 4 times).
21539-H MAN-MX2203-MX2204-QSG
Quick Start for the HOBO® TidbiT® MX Temp 400 (MX2203) & Temp 5000 (MX2204) Logger
1
•Download HOBOconnect® to a phone or tablet from the App
Store® or Google Play™.
•Download HOBOconnect to a Windows® computer from
www.onsetcomp.com/products/software/hoboconnect.
2 Open the app. Enable Bluetooth® in your device settings if
prompted.
3 Firmly press the magnetic HOBO button
near the center of the logger to wake it up.
Both LEDs on the logger will blink once
when it wakes up. Tap Devices in the app.
Tap the logger in the app to connect to it. If
the logger does not appear in the list, make
sure the logger is within range of your
phone, tablet, or computer.
4 Tap to set up the logger. Choose your logger settings.
Note that the default Bluetooth setting for the logger is Bluetooth
Always On, which means it will “advertise” or regularly send out a
Bluetooth signal for the phone, tablet, or computer to find via the
app. This setting uses battery power. You can change this to one
of the following power saving modes:
•Bluetooth Always Off. The logger will only advertise when you
press the HOBO button on the protective logger boot to wake
it up.
•Bluetooth Off Water Detect. The logger will only advertise
when it is out of water. When it is in water, the Bluetooth
signal is automatically disabled.
Tap to save the settings to the logger.
The logger will begin logging data based on the settings you
selected. Press the HOBO button for 3 seconds If you configured
the logger to start logging with a button push (logger LEDs will
blink 4 times).
21539-H MAN-MX2203-MX2204-QSG
Press this button for
3 seconds to start
the logger (if
configured with a
button push)
Press this button for
3 seconds to start
the logger (if
configured with a
button push)
Firmly press this button for
1 second to wake up the logger
Firmly press this button for
1 second to wake up the logger

5 Deploy the logger to the location where you will be monitoring
the conditions. Follow the deployment guidelines in the full
product manual (see link to the right).
6 To offload data from the logger:
a. Tap Devices.
b. If the logger was configured with Bluetooth Always On,
continue to step c.
If the logger was configured with Bluetooth Always Off, press
the HOBO button on the logger for 1 second to wake it up.
If the logger was configured with Bluetooth Off Water Detect
and it is deployed in water, remove it from the water.
c. Connect to the logger in the app and tap .
d. To view or export the data, tap HOBO Files, tap (if
applicable), and tap .
For specifications and detailed information about
the logger, scan the code at left or go to
www.onsetcomp.com/manuals/mx2203-mx2204.
WARNING: Do not cut open, incinerate, heat above 85°C (185°F), or recharge
the lithium battery. The battery may explode if the logger is exposed to
extreme heat or conditions that could damage or destroy the battery case.
Do not dispose of the logger or battery in fire. Do not expose the contents of
the battery to water. Dispose of the battery according to local regulations for
lithium batteries.
1-508-759-9500 (U.S. and International)
1-800-LOGGERS (564-4377) (U.S. only)
www.onsetcomp.com/support/contact
© 2017–2021 Onset Computer Corporation. All rights reserved. Onset, HOBO, and HOBOconnect are registered trademarks
of Onset Computer Corporation. App Store is a service mark of Apple Inc. Google Play is a trademark of Google LLC. Windows
is a registered trademark of Microsoft Corporation. Bluetooth is a registered trademark of Bluetooth SIG, Inc. All other
trademarks are the property of their respective companies
This product has been manufactured by Onset Computer Corporation and in compliance with Onset’s ISO 9001:2015 Quality
Management System.
Patent #: 8,860,569 21539-H MAN-MX2203-MX2204-QSG
5 Deploy the logger to the location where you will be monitoring
the conditions. Follow the deployment guidelines in the full
product manual (see link to the right).
6 To offload data from the logger:
a. Tap Devices.
b. If the logger was configured with Bluetooth Always On,
continue to step c.
If the logger was configured with Bluetooth Always Off, press
the HOBO button on the logger for 1 second to wake it up.
If the logger was configured with Bluetooth Off Water Detect
and it is deployed in water, remove it from the water.
c. Connect to the logger in the app and tap .
d. To view or export the data, tap HOBO Files, tap (if
applicable), and tap .
For specifications and detailed information about
the logger, scan the code at left or go to
www.onsetcomp.com/manuals/mx2203-mx2204.
WARNING: Do not cut open, incinerate, heat above 85°C (185°F), or recharge
the lithium battery. The battery may explode if the logger is exposed to
extreme heat or conditions that could damage or destroy the battery case.
Do not dispose of the logger or battery in fire. Do not expose the contents of
the battery to water. Dispose of the battery according to local regulations for
lithium batteries.
1-508-759-9500 (U.S. and International)
1-800-LOGGERS (564-4377) (U.S. only)
www.onsetcomp.com/support/contact
© 2017–2021 Onset Computer Corporation. All rights reserved. Onset, HOBO, and HOBOconnect are registered trademarks
of Onset Computer Corporation. App Store is a service mark of Apple Inc. Google Play is a trademark of Google LLC. Windows
is a registered trademark of Microsoft Corporation. Bluetooth is a registered trademark of Bluetooth SIG, Inc. All other
trademarks are the property of their respective companies
This product has been manufactured by Onset Computer Corporation and in compliance with Onset’s ISO 9001:2015 Quality
Management System.
Patent #: 8,860,569 21539-H MAN-MX2203-MX2204-QSG