Hoist Fitness MC-7022 User manual

Fax
[phone]
[phone]
Customer Service
[phone]
RECORD SERIAL NUMBER HERE
MACHINE CODE
**WARNING!**
TO PREVENT POSSIBLE TIPPING, BOLT THIS UNIT TO THE
EXERCISE FLOOR. FAILURE TO DO SO MAY RESULT IN SERIOUS
INJURY OR DEATH.
Note: Both Serial Number and Model Number are Required when Ordering Parts
OWNER'S MANUAL
A02
MC-7022
REBOUNDER STATION

02
04
08
09
10
11
12
14LIMITED WARRANTY............................................................
PAGE 01
OWNER'S MANUAL
ABBREVIATIONS...................................................................
MC-7022 ASSEMBLY
INSTRUCTIONS .....................................................................
FRAME ASSEMBLY ..............................................................
PRE-ASSEMBLY....................................................................
DECAL PLACEMENT.............................................................
DECAL REFERENCE.............................................................
PART LIST...............................................................................
CONTENTS

OWNER'S MANUAL
PAGE 02MC-7022 ASSEMBLY
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
Two People
TOOLS REQUIRED
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
INSTRUCTIONS

OWNER'S MANUAL
PAGE 03 MC-7022 ASSEMBLY
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***

OWNER'S MANUAL
PAGE 04
MC-7022 ASSEMBLY
FRAME ASSEMBLY

MC-7022 ASSEMBLY
OWNER'S MANUAL
PAGE 05
- SOME PARTS MAY HAVE BEEN
- HAND TIGHTEN HARDWARE.
REMOVED FOR CLARITY.
FRAME ASSEMBLY
NOTE:
30
25
32
25
41
41
25
32
25
30
3

FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
OWNER'S MANUAL
MC-7022 ASSEMBLY PAGE 06
14
14
27
7
14
27
27
14
8
27
14
8
14
27
3
4
5
2
27

NOTE:
- WRENCH TIGHTEN HARDWARE.
- WRENCH TIGHTEN ALL PREVIOUSLY
HAND TIGHTENED HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
FRAME ASSEMBLY
OWNER'S MANUAL
PAGE 07 MC-7022 ASSEMBLY
NOW THAT THE MC-7022 IS COMPLETELY ASSEMBLED TAKE TIME TO
ASSURE THAT YOUR UNIT IS ASSEMBLED SQUARE AND OPERATES PROPERLY. IT
MAYBE NECESSARY TO LOOSEN SOME FRAME HARDWARE TO RE-ALIGN THE FRAME
AND RETIGHTEN BOLTS.
*IMPORTANT*
26
34
2
19
33

PRE-ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
OWNER'S MANUAL
MC-7022 ASSEMBLY PAGE 08
24
15
23
28
37
6
11
11
18
10
10
20
3
10
4
10
10
5
10
29
24
9
21
36
22
36
35
9
17
12
16
31
1
13

38
39
4
40
3
38
DECAL PLACEMENT
REMOVED FOR CLARITY.
- SOME PARTS MAY HAVE BEEN
UNLESS OTHERWISE STATED.
NOTE:
- ALL DECALS ARE CENTERED
OWNER'S MANUAL
MC-7022 ASSEMBLYPAGE 09