HOMCOM 370-289V90 User manual

1
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
ASSEMBLY INSTRUCTION
IN230600374V01_UK
370-289V90
* Suitable for children of 3+ years old, Max weight: 25 kg.
Children Ride On Car

2
Body Front bumper Rear bumper
General wheel Drive rear wheel Front frame
Commodity shelf Steering wheel Jeep rear frame
Wheel cover Charger Wrench
Product Specifications:
Suitable age:3+ years
Battery: DC 6V 4.5AH
Load Capacity: Under 25kg
Size of car: 82*48*56cm
Speed:3 km/h
Carton size: 79.5*45*38.5cm
Material: PP
o
Optimum Temperature: Below 40 C, Avoid use under burning sun
Charger: AC 100-240V 50/60Hz
Input : Show on the charger
Charge time:8-10 hours, AT Most 18 hours
Output : DC 6V
Fuse :F 5A , Self-resetting
Current: DC 500mA
Operating life:12 months to 18 months
2
1
11
1
1
3
4

3
Analytic graph
Front bumper
Front frame Gasket
Front wheel
Nut
Driving wheel
Commodity shelf
Steering wheel
Jeep rear frame
Rear bumper
Wheel
cover
Wheel
Nut
Gasket
Wheel cover

4
③
④
⑤
⑥
⑦
Function
Music button
Horn
Forward
Stop
Backward
Charge hole
Mp3
Foot pedal
Power Switch
Function indication
IN RADIO MODE:
Press 4 to auto scan and store radio stations.(No manual scan function)Press 4 will
always start auto scan function. Quickly press 4 to store Radio Channel.
Short press 3 or 5 to switch stored radio station.
Long press 3 or 5 to adjust volume.
IN MUSIC MODE
Short press 4 to play or pause music.
Short press 3 or 5 to switch music.
Long press 3 or 5 to adjust volume.
1
2
3
4
5
6
USB slot for USB Drive
Display
Switch music /adjust volume-
Stop/ Play
Switch music /adjust volume +
Mode Button
LED display shows "USB": - indicates Player is playing
from USB Drive.
LED display shows“FM”:- indicates Radio Function.
LED display shows "voltage digital".- indicates system
voltage.

5
Step 1: Rear bumper
Tune over the car, Align the rear bumper with the car slot and fix by the screw.
Step 2: Front bumper and front frame
Align the front bumper with the car slot and fix by the screw.
Align the front frame with the car slot and fix by the screw.

6
Step 3: Front wheels and wheel cover
Take off the nut, retain the gasket . assemble the wheel ,
fix and tighten the nut by the spanner .
Align the wheel cover to the wheel slot.
The other side the same.

7
Step 4: Rear wheels and wheel cover
Take off the nut, retain the gasket . Assemble the driving wheel to the gearbox and fix
the nut.
Another side, take off the nut, retain the gasket . Assemble the wheel and fix the nut.
Tighten the nuts by two spanners.
Align the wheel cover to the wheel slot.
Step 5: Jeep rear frame
Turn over the car, Align the rear frame with the car slot. Press the rear frame until “ka”.

8
Step 6: Commodity shelf
Align the commodity shelf with the car slot and fix by the screw.
Step 7: Steering wheel
Firmly connect the wires terminals , and align the steering wheel with the car slot.
Hide the terminals and press the steering wheel until “ka”.
Step 8: Battery connect
Take off the seat screw and the seat, connect the terminals .
And align the seat by the screw.

9
WARNING
Charging:
- Charge the battery for less than 10 hours – charging for longer can cause permanent
damage.
- Place the DC plug into the power socket, then put the charger into the plug. Never
use the product when charging.
- This product can be used for one hour – the charging time is 8-10 hours.
- It is normal for charger and battery to stay cool when charging.
- Do not use the connector near water to avoid damage.
- Only use the supplied charger. Using a charger not supplied by the manufacturer can
damage the product.
- When not in use for a long time, charge the product.
- This product must be assembled by an adult.
- When unassembled, this product contains small and sharp parts – keep out the reach
of small children.
- Do not use in traffic.
- This product is not to be used by children under three years of age.
- The seatbelt must be worn when using this product.
- Adult supervision is required when using this product.
- Battery must be charged by an adult. Charge the product before its first use.
- Keep packaging out the reach of children to avoid suffocation.
- Only use parts provided by the manufacturer.
- Ensure children do not play with the charger.
- Do not use in congested streets, roads, slopes or near drains.
- Do not change the circuit or add electrical devices to the product.
- Do not use the remote control in rain. Keep the car away from water and other liquids
to avoid damage.
- The maximum load is 25kg – this product can be used by one child at a time.
- Ensure the power is switched off when not in use. Remove the battery connector
when it has not been used for a while.
- Before using and charging, check the plug and other parts for any damage.
Note

10
Charging steps are as follows:
Step 1: Put the charger plug into the plug hole.
Step 2: Connect the charger to the power socket.
Warning: Car must be charged by adults only. Car is useless during charging
Troubleshooting
Problem Cause Solution
- The battery is low.
- Failure to press the switch
button correctly.
- Power connector failure.
- Battery breakdown.
- Electrical devices are
damaged.
- Generator is faulty.
- Ensure battery is fully
charged.
- Follow instructions when
using this product.
- Reinstall the power
connector.
- Change battery.
- Change electrical devices.
- Change generator.
The car does not start.
The battery does not
charge.
- Battery connector failure.
- Charger doesn't charge.
- Faulty charger.
- Reinstall the connector.
- Plug in the charger again.
- Change the charger.
The car doesn't drive
far. - Battery isn't fully charged.
- Overused battery.
- Ensure the battery is fully
charged.
- Change the battery.
There's a slight noise
and the car heats
when charging. - This is normal. - Nothing needs to be done.
The car operates at a
slow speed.
- Overused battery.
- The battery is dead.
- The product has exceeded its
maximum load.
- Uneven driving surface.
- Change the battery.
- Ensure battery is fully
charged.
- Ensure the weight is below
25kg.
- Drive on a flat and even
surface.