HOMCOM BMW S1000 RR User manual

Owner’s Manual
with Assembly Instructions
Styles and colo(u)rs may vary.
Made in China.
The owner’s manual contains important safety information as well as assembly, use and
maintenance instructions.
The Ride-on Car must be assembled by an adult who has read and understands the
instructions in this manual.
Keep the package away from children and dispose of properly before use.
Keep this manual for future reference.
BMW S1000 RR
Children Battery Powered Trike
IN220800265V02_UK_ 370-064V01

On the purchase of your new Trike
This ride-on car will provide your child with many miles of riding of
enjoyment. To help assure you and your rider a safe ride we ask you to
please read this manual carefully, and keep it for future reference.
Follow the recommendations in this manual, they are designed to improve
the safety and operation of your ride-on car and rider.
Battery
Charger
6V4Ah x 1
6V500mA
Suitable age:
Load Capacity:
Speed:
Size of car:
Power way:
Charge time:
18-36 Months
Under 20 kgs
3km/h
66 x 37 x 44 CM
Charging type
8 ~ 12 hours
About Your New Ride-On │ 1
VER: SMS-JT5188(smaller packing)-EN-190110
BMW S1000RR Children Battery Powered Trike manufactured by
Zhejiang Jiajia Ride-On Co., Ltd. (Xincang Industrial Zone, Pinghu City,
Zhejiang Province, P.R.China). The BMW logo and the BMW word mark
are trademarks of BMW AG and are used under license.

1
2
3
4
5
6
7
8
9
10
11
12
13
1
1
1
1
1
1
1
2
3
1
1
2
1
PART
NO.
REMARKS
PART NAME
Q’ty (pcs)
Vehicle body
Faceguard
Handle bar
M5x35 machine screw
Ø5 nut
Charger
Gear box
Rear wheel
Ø8 washer
Lock nut
Front wheel assembly
Spanner
Rear axle
Parts List │ 2

1
7
8
9
9
13
2
11
3
69
4
5
8
12
10
NOTE: Some parts shown are assembled on both sides of vehicle
Parts Diagram │ 3

Spanner
Before Assembly │ 4
• Make sure that the power switch is turned “OFF” before assembling the ride-
on.
• Before first time use, charge the battery for at least 4 to 6 hours.
• Assembly tools required:
WARNING!
Screwdriver
(not included)
● Non-rechargeable batteries are not to be recharged.
● Rechargeable batteries are to be removed from the toy before being charged.
● Rechargeable batteries are only to be charged under adult supervision.
● Different types of batteries or new and used batteries are not to be mixed.
● Batteries are to be inserted with the correct polarity.
● Exhausted batteries are to be removed from the toy.
● The supply terminals are not to be short-circuited.
BATTERY INFORMATION
• ADULT ASSEMBLY REQUIRED.
• Always remove protective material and poly bags and dispose before assembly.

56
1
2
43
7
8
Attach the Rear Wheels │ 5
5. Slide a Ø8 washer onto the rear axle.
6. Slide a rear wheel (gear side first) onto the rear alxe.
7. Slide a Ø8 washer onto the rear axle.
8. Tighten a lock nut to the end of the rear axle with a spanner.
HINT: An extra spanner has been provided to hold the Lock Nut on the
other side of the rear alxe while tightening the Lock Nut on the other side.
Remove all the parts from the rear axle. Turn the vehice body upside down.
1. Slide a Ø8 washer onto the rear axle.
2. Slide a driving wheel (gear side inward) onto the rear axle.
3. Plug the connector on the vehicle into the connector on the motor.
4. Slide rear axle through the hole on the gear box, (ensure the driving wheel
match up with the gear box), and out through the hole on the other side of the
vehicle body.
Vehicle
connector
Motor
connector
Driving wheel
Gear side

2
3
4
1
Attach the Handle Bar │ 6
Remove the M5x35 machine screw and Ø5 nut from the
end of the front fork. Turn the vehicle body upright.
1. Insert the front fork into the opening on the front of the
vehicle body from the bottom side, and out through the
hole on the top of the vehicle.
2. Place the handle bar over the the end of the fork.
End of front fork
Front fork
3. Align the holes on each side of handle
bar with the holes at the end of the
fork.
4. Fasten a nut on the opposite end of
the screw to secure the handle bar.

1
1
42
3
Attach the Faceguard │ 7
1. With a small screwdriver remove the screw on the battery cover on the
faceguard.
2. Remove the battery cover from the top of the battery compartment.
3. Insert two AAA batteries in their correct polarities.
4. Replace the battery cover over the battery compartment and fasten with the
screw you removed in step one.
If you your vehicle with the sound function, follow the steps 1-4
to add the batteries (not included). Refer to the battery information on
page 3.

1
2
3
3
Attach the Faceguard │ 8
1. Plug the light wire connector on the faceguard into the connector on the vehicle.
2-3. Insert the tab A on the faceguard into the biggest hole (A) on the vehicle. Then fit the
tab B & tab C into the hole B & hole C in the vehicle body, also fit the both stopers into
the holes in the vehicle body. Push the faceguard down still hear it “click” into place.
Stoper
Stoper
Tab B
Tab A
Hole A
Hole B
Tab C
Hole C

1
2
3
Connect the Power Supply │ 9
1. Using a screwdriver to remove the screw on the seat back.
2. Remove the seat.
3. Plug the red connector into the terminal on battery as shown.
4. Replace the seat.