Home Accents Holiday TY216-2014 User manual

SKU # 1005 415 732
OMS THD SKU # 1005 269 864
Model # TY216-2014
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 3 ft Yuletide Lane LED Teddy Bear. We strive
to continually create quality products designed to enhance your home.
Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing HomeAccents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
3 ft Yuletide Lane LED Teddy Bear
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many parts
are connected by the lighting string that runs throughout the item. Take special care not
to pull, cut or damage the lighting string. Read the entire manual prior to assembly and
identify all the parts included in the package against the parts list. It is recommended to
assemble parts of the product while laying flat on the ground versus standing the item
up to assemble the parts. If any parts are missing or damaged do not attempt assembly
but contact our customer service center or return to place of purchase with purchase
receipt.
*Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 4.8 Watts (0.04
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Trouble Shooting
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDS,
batteries, products that have been subjected to unauthorized repair and/or modification
and damage caused by shipping and improper handling, alterations, misuse, in store
display models or accidents. Questions, problems, missing parts? Before returning to the
store, call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
Diagram of Parts
Parts List
Locater Name Qty.
A Hat 1
B Ear 2
C Head 1
D Halves of Body 2
E Front Leg 2
F Back Leg 2
G Drum 1
H Drum Stick 2
Hardware List
Locater Name Qty.
I Spare Fuse 2
J Spare Bulb 2
K Plastic Tie 15
L Ground Stake 4
A
H
E B
C
K D
G
F
L
J
I B
D

A
SSEMBLY
1 Assembling the Body
Align two halves of Body (D) each other and insert the connecting rods
on one half into the connecting holes on the other half then fasten
together at the connecting loops with Plastic Ties (K)
2 Assembling the Arms to the Body
Insert the connecting rods on eachArm (E) into the matching connecting
holes on the sides of the Body (D) and fasten them together at the
connecting loops with Plastic Ties (K). Insert the connecting rods on the
bottom of the Head (C) into the connecting holes at the top of the Body (D)
and fasten them together at the connecting holes with Plastic Ties (K).
3 Assembling the Legs to the Body
Insert the connecting rods on each Leg (F) into the connecting holes on
the bottom / sides of the Body (D) and fasten them together at the
connecting loops with Plastic Ties (K).
4 Assembling the Hat and Ears to the Head
Insert the connecting rods on each Ear (B) into the connecting holes on the
Head (C). Insert the connecting rod on the Hat (A) into the connecting holes
on the top of the Head (C).
5 Assembling the Drum and Stick to the Front Legs
Insert the connecting rods on each Drum Stick (H) into the matching
connecting holes of the FrontArms (E). Fasten the Drum (G) and the
Body (D) together at the connecting loops with Plastic Ties (K).
6 Assembling the Ground Stakes
Insert Ground Stakes (L) over the metal frame of each ground connecting
loop then into the ground firmly.
D
K C
D
E
K
F
D
KB
C
A
G
H
E
K
D L