Home Accents Holiday 21RT0182114 User manual

SKU # 1006 224 642
Model # 21RT0182114
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 6ft Yuletide Lane LED Nutcracker Playing
Drums. We strive to continually create quality products designed to
enhance your home. Visit us online to see our full line of products available
for your home improvement needs. Thank you for choosing HomeAccents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
6ft Yuletide Lane LED Nutcracker Playing Drums
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many parts
are connected by the lighting string that runs throughout the item. Take special care not
to pull, cut or damage the lighting string. Read the entire manual prior to assembly and
identify all the parts included in the package against the parts list. It is recommended to
assemble parts of the product while laying flat on the ground versus standing the item
up to assemble the parts. If any parts are missing or damaged do not attempt assembly
but contact our customer service center or return to the place of purchase with
purchase receipt. 1-877-527-0313
*Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 9.6 Watts (0.08
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
a. Ensure that the floor, ground or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDS,
batteries, products that have been subjected to unauthorized repair and/or modification
and damage caused by shipping and improper handling, alterations, misuse, in store
display models or accidents. Questions, problems, missing parts? Before returning to the
store, call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-877-527-0313
Diagram of Parts
Parts List
Locater Name Qty.
A Hat 1
B Head 1
C Halves of Body 2
D Arm 2
E Legs/Feet 2
F Drum 1
G Drum Stick 2
H Base Stand 1
Hardware List
Locater Name Qty.
I Spare Bulb 4
J Spare Fuse 2
K Plastic Tie 15
L Ground Stake 8
M Anchoring String 4
A
H F
B
J
I
E
K
G
C
L
M
G
E
DD

A
SSEMBLY
1 Assembling the Body
Align the two Halves of Body (C) with each other then insert the
connecting rods on one half into the connecting holes on the other
half. Fasten together with Plastic Ties (K).
2 Assembling the Legs, Base Stand to Body
Insert the connecting rods at the top of Base Stand (H) into the connecting
holes at the bottom of both Legs/Feet (E) and fasten at the connecting
loops with the Plastic Ties (K). Insert the connecting rods on the top of the
Legs/Feet (E) into the connecting holes at the bottom of the Body (C) and
fasten at the connecting loops with the Plastic Ties (K).
3 Assembling the Head and Arms to Body
Insert the connecting rods on the Head (B) and the Arms (D) into the
matching connecting holes on the Body (C) and fasten at the connecting
loops with the Plastic Ties (K).
4 Assembling the Drum Sticks to the hands
Insert the connecting rods on each Drum Stick (G) into the matching
connecting holes on each Hand (D).
5 Assembling the Hat and the Drum
Insert the connecting rods on the top of the Head (B) into the connecting
holes at the bottom of the Hat (A) and fasten at the connecting loops with
the Plastic Ties (K). Insert the connecting rod on the Drum (F) into the
matching connecting hole of the front of the Body (C) and fasten at the
connecting loops with Plastic Tie (K).
6 Assembling the Ground Stakes
Insert Ground Stakes (L) over the metal frame ground connecting loop
then into the ground firmly.
7 Assembling the Anchoring Strings and Ground Stakes
Hook the plastic clipped end of each of Anchoring Strings (M) onto the
metal loop on the Body (C) at the shoulder. Attach the looped end of the
Anchoring String to the top of the Ground Stakes (L). Pull the Anchoring
String with Stake tightly out and away from the Nutcracker evenly at 4
corners then insert the Stake firmly into the ground.
C
K
C
H
E
K
D
C
B
G
D
C
K
F
A
B
L
L
M