Home Accents Holiday Goblin Thief 22TK60334 User manual

GOBLIN THIEF
INSTALLATION AND OPERATING INSTRUCTIONS
KEEP ALL PLASTIC AND WIREPARTS AWAY FROMCHILDREN
WARNING: DO NOT TURN ON THE PROP UNTIL FULLY ASSEMBLED. STAY CLEAR OF THE PROP WHILE OPERATING.
ESTIMATED ASSEMBLY TIME NINE MINUTES.
PARTS
ASSEMBLY
1. STAND
2. LEGS
3. BODY AND
HEAD
4. BURLAP BAG AND
FRAME
5. BURLAP BAG
POSTS
6. CENTER POST
AND CONTROL BOX
7. SKULL AND HAND
8. LEFT FOOT
9. RIGHT FOOT
10. 6V 2A ADAPTER
11. PANTS
12. WAIST BRACKET
1. Slide the LEFT FOOT over the
left LEG POLE labeled A.
Snap lock the LEG POLE to the
METAL BASE.
MATCH A TO A
2. Slide the RIGHT FOOT over the
right LEG POLE labeled B.
Snap lock the LEG POLE to the
METAL BASE.
MATCH B TO B
3. Slide the PANTS over the both
LEG POLES.
4. Snaplock the CENTER POST
AND CONTROL BOX to the LEGS.
MATCH C TO C
MATCH D TO D
5. Raise the fabric on the BODY
AND HEAD. Locate the post
under the shoulders. Snap lock
the HEAD AND BODY on to the
CENTER POLE AND CONTROL
BOX. Match E to E
6. Insert the BURLAP BAG POST
into the BURLAP BAG
AND FRAME. Seat the post
onto the FRAME and insert the
BURLAP BAG wire into the
BURLAP BAG POST. Repeat on
the opposite side.
7. Secure the BURLAP BAG
AND FRAME to the METAL
FRAME with both hook and
loop fasteners.
8. Insert the WAIST BRACKET
POSTS into the CENTER POST
AND CONTROL BOX. Pull the
PANTS upward over the WAIST
BRACKET.
™
1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
11. 12.

9. Snap lock the left arm on the
BODY AND HEAD to the left
hand on the BURLAP BAG AND
STAND.
Match F to F
10. Reach inside the BURLAP BAG
WITH STAND. Press the push lock
to the side. Insert the SKELETON
AND HAND and release the push
lock to secure. Match I to I
11. Snap lock the right arm on
the BODY AND HEAD to the
SKULL AND HAND.
Match G to G
12. Connect the wire from the
CONTROL BOX to the wire on the
SKULL AND HAND .
Match H to H
13. Connect the wire from the
CONTROL BOX to the wire on
the BODY AND HEAD .
Match J to J
14. Connect the wire from the
CONTROL BOX to the wire on
the BODY AND HEAD .
Match K to K
15. Connect the wire from the
CONTROL BOX to the wire on
the BODY AND HEAD .
Match L to L
16. Insert 4 AA batteries (not
included) or 6V2A adapter
(included) into the control box.
Move the switch to the on
position. Make a loud sound
(clap) or move in front of the
item to activate. Turn the item
o when not in use.

Requires 6V 2A ADAPTER (included)
or 4AA batteries (not included)
ALL NEW MATERIALS:
METAL, FOAM, PLASTIC, POLYESTER
Surface washable only.
GOBLIN THIEF™ is a trademark of Tekky.
Copyright © 2022 Tekky.
All Rights Reserved.
MADE IN CHINA
visit us at tekkydesign.com
EXTERNAL SPEAKER IS NOT INCLUDED. MUST BE PURCHASED SEPARATELY.
1. Plug speaker cord into the jack labeled SPEAKER JACK
located on the MODULE.
2. Use volume knob on external speaker to control volume levels.
OPTIONAL EXTERNAL SPEAKER SET UP
OPTIONAL FOOTPAD SET UP
1. Insert the cable from optional footpad into the jack labeled
FOOTPAD on the MODULE.
2. Place the switch in the FOOTPAD position to enable
FOOTPAD activation.
3. Step on the FOOTPAD to activate the scary sequence!
Footpads and adapters are sold separately and can be
purchased at www.tekkyaccessories.com
*
FOOTPAD IS NOT INCLUDED. MUST BE PURCHASED SEPARATELY.
WARNING
DO NOT TURN ITEM ON UNTIL YOU HAVE COMPLETELY FINISHED ASSEMBLY.
STAY CLEAR OF ITEM WHILE OPERATING. DO NOT PLACE ITEM ON UNEVEN GROUND.
DO NOT PLACE WEIGHT ON ITEM WHILE IN OPERATION.
RECOMMENDED FOR SHELTERED OUTDOOR USE.
DO NOT RETURN THIS ITEM TO THE STORE!
parts missing, please go to tekkydesign.com for
assistance or call 1-855-HD-HOLIDAY
BATTERY INSTRUCTIONS AND CAUTIONS
Battery installation and removal should be performed by an adult.
Remove batteries when not in use.
Use only batteries recommended in the instructions.
Do not mix new and used batteries.
Do not mix alkaline, carbon-zinc, nickel-cadmium, rechargeable or
Be mindful to insert batteries with the correct polarity (+/-) as indicated.
Remove all exhausted batteries.
Rechargeable batteries are only to be charged under adult supervision.
Rechargeable batteries are to be removed from the item before being charged.
Non-rechargeable batteries are not to be recharged.
The supply terminals are not to be short-circuited.
Always dispose of exhausted batteries properly.
Do NOT dispose of batteries in fire, they may leak or explode.
Battery
Diagram
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation..
Home Depot, 2455 Paces Ferry Road, Atlanta, GA 30339 1-855-HD-HOLIDAY HOMEACCENTSHOLIDAY.COM
22TK60334
Goblin Thief (60334)
1007 414 700
UPC: 6-69703-60334-7
PROBLEM
TROUBLESHOOTING
SOLUTION
Item will not activate/Motion
sensor does not work
Item will not activate/
Sound is distorted or faint
No Sound.
Still experiencing a problem? Please call 1-855-HD-HOLIDAY or go to tekkydesign.com for further assistance.
Ensure all wires are connected securely and matched with the correct labels.
If using batteries, replace with fresh batteries.
Ensure the volume knob is NOT turned all the way down.
Ensure motion sensor is located on the front of the ITEM is not blocked by fabric or any
other obstructions. To test the motion sensor, shine a ashlight in the motion sensor tube.