Home Accents Holiday TY757-1614-1 User manual

OMS THD SKU # 1001 766 853
Model # TY757-1614-1
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 30in 60 Light LED TINSEL DONKEY. We strive to
continually create quality products designed to enhance your home. Visit
us online to see our full line of products available for your home decoration
needs. Thank you for choosing HomeAccents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
30in 60 Light LED TINSEL DONKEY
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Please
note that many of the parts are connected by the lighting string that runs throughout
the item. Remove the parts with care not to damage the lighting string or parts. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return the item to place of purchase with
purchase receipt. Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 4.8 Watts (0.04
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product, inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections or exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse or accidents. Questions, problems, missing parts? Before returning to the
store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST,
Monday-Friday
Diagram of Parts
Hardware
Parts List
Locater Name Qty.
A Ears 2
B Head/Neck 1
C Halves of Body 2
D Tail 1
E Front Legs 2
F Hind Legs 2
Hardware List
Locater Name Qty.
G Ground Stakes 4
H Plastic Tie 10
I Spare Fuse 2
J Spare Bulb 2
G H I J

A
SSEMBLY
1. Assembling the Body
Align the two Halves of Body (C) and insert the connecting rods of one
half into the connecting holes on the other half then fasten together at the
connecting loops with the Plastic Tie (H).
2. Assembling the Head/Neck, Tail and Legs to the Body
Insert the connecting rods on each Leg (E&F) into the connecting holes on
the underside of the Body (C) then fasten together at the connecting loops
or over the metal frame with the Plastic Ties. The Legs come with metal
bars attached to stabilize the Donkey. Insert the hooked
end of the metal bars into the connecting tube on the opposite Leg.
Insert the connecting rod on the bottom of the Head/neck (B) into the
connecting holes of the front of the Body and fasten together at the
connecting loops with the Plastic Tie (H). Insert the connecting rod on the
Tail (D) into the connecting hole at the rear of the Body.
3. Assembling the Ears to the Head and Securing the
Donkey to the Ground
Insert the connecting rods on each Ears (A) into the connecting holes on
the top of the Head (B). Secure the Donkey to the ground with the
Ground Stakes (G).