Home Accents Holiday TY604-1714-2 User manual

OMS THD SKU# 1003 135 911
Model # TY604-1714-2
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 72in 200 Light LED Snowman. We strive to
continually create quality products designed to enhance your home.
Visit us online to see our full line of products available for your home
decoration needs. Thank you for choosing Home Accents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
72in 200 Light LED Snowman
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Please
note that many of the parts are connected by the lighting string that runs throughout
the item. Remove the parts with care not to damage the lighting string or parts. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return the item to place of purchase with
purchase receipt. Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 12 Watts (0.1
Amps). Do not overload. Do not connect to another lighting string, decorative outfit
or other electrical products. Before you use or re-use this product, inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections or exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse or accidents. Questions, problems, missing parts? Before returning to the
store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST,
Monday-Friday
Diagram of Parts
Hardware
Parts List
Locater Name Qty.
A Hat 1
B Head 1
C Nose 1
D Halves of Upper
Body 2
E Halves of Lower
Body 2
F Arm 2
Hardware List
Locater Name Qty.
G Ground Stake 4
H Plastic Tie 15
I Spare Fuse 2
J Spare Bulb 5
G H I J
A B C
D E
F

A
SSEMBLY
1 Assembling the Lower Body
Align the two Halves of Lower Body (E) with each other then insert
the connecting rods on one half into the connecting holes on the
other half and fasten together at the connecting loops with Plastic
Ties (H).
2 Assembling the Upper Body
Align the two Halves of Upper Body (D) with each other then insert the
connecting rods on one half into the connecting holes on the other half
and fasten together at the connecting loops with Plastic Ties (H).
3 Securing the Upper and Lower Body's together
Insert the connecting rods on the bottom of the Upper Body (D) into the
connecting holes at the top of the Lower Body (E) and fasten together
at the connecting loops with Plastic Ties (H). Note: Make sure both are
facing forward with the buttons.
4 Assembling the Head to the Body
Insert the connecting rods on the bottom of the Head (B) into the connecting
holes at the top of the Body and fasten together at the connecting loops with
Plastic Ties (H).
5 Assembling the Nose to the Head
Insert the connecting rods on the Nose (C) into the connecting holes
on the front of the Head (B).
6 Assembling the Arms to the Body
Insert the connecting rods on eachArm (F) into the connecting holes
on the upper Body the fasten together at the connecting loops with
Plastic Ties (H).
7 Assembling the Hat to the Head
Insert the connecting rods on the bottom of the Hat (A) into the
connecting holes on the top of the Head (B).
8 Securing the Snowman to the Ground
Secure the product to the ground with the Ground Stakes (G) by placing
the Ground Stake through the connecting loops at the base of the
Snowman then over the metal frame and into the ground.