Home Accents Holiday TY314-1411-1 User manual

OMS THD SKU # 1000 065 580
Model # TY314-1411-1
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 5ft 200 LIGHT LED COTTON MESH
SNOWMAN. We strive to continually create quality products designed to
enhance your home. Visit us online to see our full line of products available
for your home decoration needs. Thank you for choosing Home Accents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
5ft 200 LIGHT LED COTTON MESH SNOWMAN
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Please
note that many of the parts are connected by the lighting string that runs throughout
the item. Remove the parts with care not to damage the lighting string or parts. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return the item to place of purchase with
purchase receipt. Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 12 Watts (0.1
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product, inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections or exposed copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse or accidents. Questions, problems, missing parts? Before returning to the
store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST,
Monday-Friday
Diagram of Parts
Hardware
Parts List
Locater Name Qty.
A Head 1
B Halves of Upper
Body 2
C Halves of Lower
Body 2
D Arm 2
E Hat 2
F Scarf 1
Hardware List
Locater Name Qty.
G Ground Stake 4
H Plastic Tie 10
I Spare Fuse 2
J Spare Bulb 5
G H I J
A
E
D
F
B
C

A
SSEMBLY
1 Assembling the Lower Body to the Upper Body
Align the two Halves of Lower Body (C) then insert the connecting
rods on one Half into the matching holes on the other Half then fasten
with Plastic Ties (H). Align the two Halves of Upper Body (B) with each
other then insert the connecting rods on one Half into the matching
holes on the other Half and fasten them with Plastic Tie (H).
2 Assembling and Securing the Body
Stand the Lower Body (C) section in an upright position. Insert the metal
connecting rods on the bottom of the Upper Body (B) into the matching
holes on the top of the Lower Body and fasten them together with Plastic
Tie (H).
3. Assembling the Head to the Body
Insert the metal connecting rods on the Head (A) into the connecting
holes at the top of the Body then to fasten them together with Plastic Tie
(H) at the connecting loops.
4. Assembling the Arms and Hat
Insert the metal connecting rods on each of theArms (D) into the matching
holes on the Upper Body. Insert the connecting rods on the Hat (E) into
the matching holes on the top of the Head (A).
5. Assembling the Scarf to the Snowman
Wrap the Scarf (F) around the neck of the Snowman and secure the
ends together with the Velcro. Fasten all parts of the Snowman where
needed with Plastic Ties (H).
6 Securing the Snowman to the Ground
Secure the Snowman to the ground by using the Ground Stake (G).