Home Accents Holiday TY018-1821-1 User manual

OMS THD SKU # 1003 002 189
Model # TY018-1821-1
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 84in 140 Light LED Orange Scary Ghost Tree.
We strive to continually create quality products designed to enhance your
home. Visit us online to see our full line of products available for your home
decoration needs. Thank you for choosing Home Accents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
84in 140 Light LED SCARY GHOST TREE
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Please
note that many of the parts are connected by the lighting string that runs throughout
the item. Remove the parts with care not to damage the lighting string or parts. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return the item to place of purchase with
purchase receipt. Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 9.6 Watts
(0.08Amps). Do not overload. Do not connect to another lighting string, decorative
outfit or other electrical products. Before you use or re-use this product, inspect it
carefully. Discard or return to place of purchase with purchase receipt if the product
has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures,
loose connections or exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is
placed somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of
purchase for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse or accidents. Questions, problems, missing parts? Before returning to the
store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST,
Monday-Friday
Diagram of Parts
Hardware
Hardware List
Locater Name Qty.
Q Bolt & Wingnut 2
R Ground Stake 4
S Plastic Tie 10
T Spare Fuse 1
U Spare Bulb 4
Q R S T U
Parts List
Locater Name Qty.
A Front Half of Upper Section 1
B Rear Half of Upper Section 1
C Front Half of Lower Section 1
D Rear Half of Lower Section 1
E Branch 1
F Branch 1
G Branch 1
H Branch 1
I Branch 1
J Branch 1
K Branch 1
L Branch 1
M Base Leg 1
N Base Leg 1
O Base Leg 1
P Base Leg 1
A B C D E
F G H I
J K L M
N O P

A
SSEMBLY
1 Assembling the Lower Section of Tree
Align the Front and Rear Halves of the Lower Section (C, D) with
each other and fasten them together at the connecting loops with
Plastic Ties (S).
2 Assembling the Base Legs to the Lower Section
Insert the connecting rods on the end of the Base Legs (M,N,O,P)
into the matching holes on the Lower Section of Tree and fasten
them together at the connecting loops with the Plastic Ties (S).
3 Assembling the Upper Section of Tree
Align the Front and Rear Halves of the Upper Section (A,B) with each
other and fasten them together at the connecting loops with Plastic
Ties (S).
4 Assembling the Upper & Lower Sections together
Insert the connecting rods on the bottom of the Upper Section into the
holes at the top of he Lower Section and secure them together at the
connecting loops with Bolt & Wingnut (Q).
5 Assembling the Branches to the Tree
Insert the connecting rod at the end of each of the Branches
(E,F,G,H,I,J,K,L) into the holes on the Upper Section of the Tree.
Use the diagram of the finished Tree on thisAssembly Sheet as a
reference to best place the Branches on the Tree.
6 Assembling the Ground Stakes
Insert the Ground Stakes (R ) through the tip of the Base Legs making
sure you "catch" the metal frame with the hook on the Ground Stake
then firmly press the Ground Stake into the Ground.